SP06Q002-T Datasheet | DigiCamel IC Datasheet

Manufacturer Specifications

Compare SP06Q002-T variants.

Select a manufacturer to view its specifications, local PDF, and searchable HTML text.

1 manufacturers / 1 documents

Manufacturer	Series	Package	Documents	Available	Select specification
Hitachi Semiconductor	-	-	1	PDF HTML	Viewing

Online Datasheet

Read the Hitachi Semiconductor document online.

SP06Q002-T HITACHI

Document overview

Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 22

Technical content

ELECTRONICS CO.,LTD P.O. BOX 26-27 KAOHSIUNG TAIWAN R.O.C. TEL:(07) 82158114 (7 LINE) FAX:(07) 821-5815 FOR MESSRS : DATE : May.07,2004 CUSTOMER’S ACCEPTANCE SPECIFICATIONS SP06Q002-T

: DATE SHEET No. SUMMARY May.07,'04 |7B64PS 2705- 15. ELECTRICAL CHARECTERISTICS SP06Q002-T-2 | 5.4 ELECTRICAL CHARCTERISTICS OF LCD Page 5-1/2 revised : Power Supply Current For Logic TYP: (TBD) — (0.1) Power Supply Current for LC Driving TYP : (TBD) — (2.0) 7B64PS 2705- | 5.5 ELECTRICAL CHARCTERISTICS OF LCD BACKLIGHT SP06Q002-T-2 | sevised : Page 5-2/2 Power Supply Current for LED: CONDITION : T.B.D —> VLED=5.0V KAOHSIUNG HITACHI Sh. ELECTRONICS Co.,LTD, [PATE] May.07, of | ? SPO6Q00 pace| 2a |

GENERAL SPECIFICATIONS (1) Part Name SP06Q002-T (2) Module Size 67.1 (W)mm x 55.8 (Hymmx3.8 (D) mm (3) Effective Area 53.2(W)mm min. x 40.4(H)mm_ min. (4) Dot Pitch 0.16 (W)mm x 0.16 (H)mm (5) Dot Size 0.145 (W)mm x 0.145 (H)mm (6) Resolution 320 (W) x 240 (H) dots (7) Duty Ratio 11242 (8) LCD Type Transflective type B/W F-STN (Positive Mode) (9) Viewing Direction 6 O'clock (10) Backlight LED(Color : Amber)

| 4. ABSOLUTE MAXIMUM RATINGS 4.1 ELECTRICAL ABSOLUTE MAXIMUM _ RATINGS. VSS=0V:STANDARD ITEM . SYMBOL | MIN. | MAX. | UNIT [COMMENT Power Supply for Logic VDD-VSS | -0.3 | 7.0 | V_ (Note 1) Power Supply for LCD Driving | vm [0.3 [5 | VV (Note 1) Input Voltage VbD+0.3]_V_[(Note 1,2) Note 1: All Voltage values are referred to GND=0V Note 2 : DOFF , FLM , CL1, CL2 , DO~D3 , M. Note 3 : Make certains you are grounded when handling LCM. 4.2 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS. ITEM OPERATING COMMENT [ min. [_wax. | min. | Max. | Ambient Temperature a 2 fazemeim max. (Note 6) Vibration |. 2.45 mis | - | (Note 5) 2 490 m/s* |XYZ directions 11ms Shock - | 20.4 mis | - (Note 5) |(Note 6) [Corrosive Gas_——~«|~_—Not acceptable | Not acceptable | Note 1: Ta<$40°C: 85%RH max. Ta>40°C: Absolute humidity must be lower. Than the humidity of 85%RH at 40°C Note 2: Ta at -30°C—-< 48h, at 80°C----< 168h. Note 3 : Background color changes slightly depending on ambient temperature . This phenomenon is reversible. Note 4: When this LCM is operated under low temperature, the response time will be slower. Note 5: This module should be operated normally after finish the test. Note 6: The module do not have mounting hole. It should be fixed by the may of sandwiching-like method. KAOHSIUNG HITACHI Sh. 7B64PS 2704- SP06 -T-2 |PAGE| 4-1/4 ELECTRONICS Co.,LTD,|PATE| May.07, of s Q002T pace| aa |

i 5. ELECTRICAL CHARACTERISTICS

5.1 ELECTRICAL CHARACTERISTICS OF LCD VSS=GND

CONDITION | Min. | Typ. | MAX. | UNIT ] lfor Logic Power Supply Voltage [vcHevss| = | TT 25.0 | for LCD_Driving vsHvss[ | 25 | 28 | 34 | Input Voltage vl osvpp{ - | vop | v | (Note 1) | tiever | of o.2vop Power Supply Current VDD-VSS=3.3V Pte | wo | ea | = feo | = | me | Power Supply Current ICH VDD-VSS=3.3V (2.0) mA for LC Driving Note (2) : Recommended [ ta oc go | - [ao[ - Tv | LC Driving Voltage ven-vss | Ta=25¢,¢=0 | - |aesy| - | v | (Note 3 5) Tazs0c 20 |= 4s] = Tv Frame Frequency Note 1: DOFF , FLM, CL1 , CL2, DO~D3. Note 2 : fFLM=75Hz ,, Test pattern is all”Q”. VCH-VSS=(18.3)V, Ta=25°C. Note 3 : Recommended LC driving voltage fluctuate about +1.0V by each module. : Test pattern is all “Q”. Note 4: Need to make sure of flickering and rippling of display when setting the frame frequency in your set. Note 5: VDD=3.3V VSH=2.8V VSL=GND _ VSH-VSL VM= 5 KAOHSIUNG HITACHI Sh. 07," 7B64PS 2705- SP06Q002-T-2_ |PAGE} 5-1/2 ELECTRONICS CO.,LTD. DATE May.07-04|an| Ta4es 270s. sreccena--2 [pace] 52 |

5.5 ELECTRICAL CHARACTERISTICS OF LED BACKLIGHT

Ta=25°C (Display off) ITEM SYMBOL] CONDITION | MIN. | Typ. | MAX. | UNIT . Power Supply Voltage for LED VLED 5.0 Vv Power Supply Current _ for LED {LED VLED=5.0V 100 mA Note 1: The ILED changes depending on ambient temperature. Ambient Temperature vs. = Allowable Forward Current = 40 FLUE TT pec BCL TN <4 z bo NIT & 8 a » LEI TA | & - 0 2025 40 60 85 100 z Ambient Temperature Ta(‘C) feo VLED+ VLED- KAOHSIUNG HITACHI " Sh. ELECTRONICS CO.,LTD. DATE 7B64PS 2705-SP06Q002-T-2 PAGE

OPTICAL CHARACTERISTICS ,

6.1 OPTICAL CHARACTERISTICS OF LCD Ta=25°C (Backlight on)

ITEM SYMBOL | CONDITION | MIN. | TYP. | MAX. | UNIT Peover [kK feoe-o |- fe |-|- [| estore Troan | —# [oo o=0 | - | @on[ - | m= | 4 | . sg (Measure condition by HITACHI) Note 1: Definition of @ and 6 Note 3 : Definition of contrast "K" (Normal) 4 eaen° ® 9 Brightness on non-selected dot (B1) Y(@=180") oo ke ages OOO q \\ ~~ Brightness on selected dot (B2) N 71 Bt xX —- A -—x oo (DiF"L") YE DA 2 $0" NY = B2 Viewing Direction — Note 2: Definition of viewing angle $1 and } 2 Operating Voltage K g1<0°<92 ‘ 2.0 eo ot 2 7 seaasl Sensor Contrast ratio K vs viewing angle (BM-7) LCD Note 4 : Definition of optical response Backlight Non-selective state Selective state Non-selective state , : Tt | —_ 3 E a ee * I Rise Time Fall Time KAOHSIUNG HITACHI p Sh. ELECTRONICS CO.,LTD. May.07,'04 7B64PS 2706-SP06Q002-T-2 6-1/2

6.2 OPTICAL CHARACTERISTICS OF BACKLIGHT

(LCM, BACKLIGHT ON, Ta=25°C) ITEM [win | typ. [ max. | unr | NOTE Brightness Uniformity | - | - | #30 | 9% | (Note 1.2) Brightness [ @ | @m | - | cam? | tneo=60 ma Note 1: Measure of the following 9 places on the display. Y=80 Y=160 Y=240 - Den tI ~ oo I i Note 2 : Definition of brightness tolerance. Max or Min Brightness — Average Brightness (Ce) X 100% Average Brightness KAOHSIUNG HITACHI Sh. 07," 7B64PS 2706- SP06Q002-T-2 {PAGE| 6-2/2 ELECTRONICS CO.,LTD. May 07404 Sr | reese 2roe-seosanea.2 Joace| 27

INTERFACE TIMING

8.1 TIMING CHART (4-BITS PARALLEL DATA INPUT)

50.94 usSTS59us a ao. —F LO 1/80 | wo ILIA * X240__ x1 x2 D3 GR CX Xin X_ > D2 C XeX eX X_) COE D1 DOMED XXX > Do ee ee 30ns min. __ __30ns min. (REDUCTION) | a. — JIN A SLL 242xT FLM ; S g—__I L— KAOHSIUNG HITACHI toa | Sh.

8.2 TIMING CHARACTERISTICS

PARAMETER SYMBOL | MIN. | TYP._| MAX. | UNIT | CONDITION [shit Clock Period ——=s|_—stwek =| 152 | - | - [ ns | tr, tfstins [shift Clock"H" Pulss Width | twckH | 65 | - [= | ns | | |shift Clock“L"Puss with | twoxt | 65 [= [| - | ns [| IData Setup Time S| tos” =| 60 | - [| - [ ns [| | [Data Hole Time ———SS|| = tH | «80 =| SC - | hd] ons S| [Latch Pulse“H” Pulse width | twipH | 65 | - | - | ns | | linput Signal Rise Time «| str =| - | - | 30 | ns | | linput Signal Fall Time | | - | - | 30 [| ns [| | HFLMSet Up Time | tres =| 100 | - [ - | ns | - | HFLM"Hold Time S| StH | 30 =| SO OT ns S| tWLPH 0.2vDD {SCL 0.2VDD cli tHCL. itWCKH TT {DH tFH . FLM ozvno KAOHSIUNG HITACHI Sh. 07," 7B64PS 2708- SP06Q002-T-2 |PAGE| 8-2/3 ELECTRONICS CO.,LTD. DATE May o7, o4 eee

8.3 TIMING OF POWER SUPPLY AND INTERFACE SIGNAL

3.3V 0.95VDD VDD VDD vss 0~50ms 0~50ms vss yg _ _ a _ _ vss _ VSS 20ms min. 20ms min. DOFF vss vss DOFF Power On Power Off Note 1: DOFF function takes priority even if the input signal status becomes irregular immediately after VDD power-on. Note 2: Please keep the specified sequence because wrong sequence may cause permanent damage to the LCM.

8.4 POWER SUPPLY FOR LCM

VCH O 25v max. VSH VLED(+) R vM LED BACKLIGT VR VLED(-) vpp }— . _mzc i, R vss KAOHSIUNG HITACHI P Sh. ELECTRONICS CO.,LTD. DATE May or-04| SP 7B64PS 2708-SP06Q002-T-2 PAGE | 8-3/3

OUTLINE DIMENSIONS

9.1 OUTLINE DIMENSIONS

67.140.5 3.440.3 a nl 4.9403 a Py ee ee ee [ oT | aaa Window | { Active Area rea I 740.3 3] =is| = | | g si=|s f | (23) Eassas= i View Direction _|j aN ——= Ft NL s \\ Deta A a} Ss 3] 8] 3 o ee Detail A . Conductive Side Notes: Fa 1.Referance mark :( ) ° 2.Unit : mm 3.Scale : NTS 4 4.Measurement when adding 9.8x10 Pa at the measuing point.

9.2 DISPLAY PATTERN

51.185 (320 dots) i —— | DO L | oo a =| 3} LIL : L] a) ols! OOO o x H i N i } Pe ODO Oo

0.145 Scale : NTS :

0.16 Unit : mm

Measurement Tolerance : +0.1

9.3 INTERFACE PIN CONNECTION

QUALITY STANDARD

10.1 APPEARANCE INSPECTION CONDITIONS (IN THE VIEWING AREA)

Visual inspection under single 20W fluorescent lamp with eyes to LCD distance 25cm and lamp to LCD distance 25 to 30cm. Viewing angle should be smaller than 45°. The line of sight for inspection shall be inside the half section of a cone which consisted of line segment 45° to the axis with vertex at the center of LCD. The cone axis perpendicular to the LCD and passing through the fluorescent lamp. SD» fe 4 EYE a eens einieat a EYE AS. 450 LoD Bezel

10.2 DEFINITION OF EACH ZONE

A zone: Within the active area specified at page 9-1/2 of this document. B zone: Area between the edge line of LCM and the active area line specified at page 9-1/2 of this documet. Active Area i i 1 ! ! Edge Line of LCM ! ! ! ! i ! A | ace eee eet ce neenrenenrer ten tincceeed B zone KAOHSIUNG HITACHI \\ Sh. ELECTRONICS CO.,LTD. DATE May.7r04 |S 7B64PS 2710-SP06Q002-T-2 PAGE |10-1/3

10.3 APPEARANCE SPECIFICATION

*) If the problem occurs about this item, the responsible person of both party (customer and HITACHI) will discuss more detail. [No [eM [| C“‘“;S*CCRIERAA CATT —" rapewcetome to be judge by HITACHI limit sample | [Dent _—s'(Same as above dd | Poamser” fame sabe || . Same as above Polarizer D(mm acceptable [Ds02 ignore (Note 1) Stains, Materials L(mm) Wwi(mm acceptable Dark Spot * pf os<W None po CR L D(mm) acceptable space c | bs02 [ignore | * D | o2<bs033 [8 | 10mm [033<D [| None number Note 12) [Those wiped out easily are acceptable LOT - | [Color Tone [To be judged by HITACHI limit sample LO - | cn ee ol Uniformity D(mm) acceptable (Note_1) [| 03s<D None ‘Contrast Average Contrast Maximum Minimum Irregularity diameter number space (Spot) D(mm) acceptable [0.25<D<0.35 [Judge by l0.35<Ds0.5_|HITACHI (Note _4 05 <D standard [None | - KAOHSIUNG HITACHI wn, [on

[ No. ITEM CRITERIA [ale Contrast Width Length | Maximum | Minimum Irregularity W(mm) L(mm) acceptable space (Line) umber L c (Note 2) The whole number < 6 Rubbing Scratch | To be judged by HITACHI limit sample fol - | Note 1: a sre & Gj Fr) wo a b 252 = p...average Diameter c...Salient Note 2: Definition of length L and width W ; a KAOHSIUNG HITACHI ' Sh. ELECTRONICS CO.,LTD. | Dare [My.07:04] S| 7B64PS 2710-SP06Q002-T-2 PAGE |10-3/3

PRECAUTION IN DESIGN | 11.1LC DRIVING VOLTAGE AND VIEWING ANGLE RANGE. | Setting VCH out of the recommended condition will be a cause for a change of viewing angle range.

11.2 CAUTION AGAINST STATIC CHARGE

As this module is provided with C-MOS LSI, the care to take such a precaution as to grounding the operator’s body is required when handling it.

11.3 POWER ON SEQUENCE

Input signals should not be applied to LCD module before power supply voltage is applied and reaches to specified voltage (3.3+410%). If above sequence is not kept, C-MOS LSI of LCD modules may be damaged due to latch up problem.

11.4 PACKING

(1) No leaving products is preferable in the place of high humidity for a long period of time. For their storage in the place where temperature is 35° or higher, special care to prevent them from high humidity is required. A combination of high temperature and high humidity may cause them polarization degradation as well as bubble generation and polarizer pell-off. Please keep the temperature and humidity within the specified range for use and storage. (2) Since upper polarizers and lower aluminum to be easily damaged , they : should be handled with full care so as not to get them touched, pushed or rubbed by a piece of glass , tweezers and anything else which are harder than a pencil lead 3H. (3) As the adhesives used for adhering upper/lower polyester and aluminum plates are made of organic substances which will deteriorated by a chemical reaction with such chemicals as acetone, Toulon, ethanol and isopropyl alcohol. The following solvents are recommended for use : normal hexane Please contact us when it is necessary for you to use chemicals other than the above.

(4) Lightly wipe to clean the dirty surface with absorbent cotton waste or other soft material like chamois, soaked in the chemicals recommended without scrubbing it hardly. To prevent the display surface from damage and keep the appearance in good state, it is sufficient, in general, to wipe it with absorbent cotton. (5) Immediately wipe off saliva or water drop attached on the display area because its long period adherence may cause deformation or faded color on the spot. (6) Fogy dew deposited on the surface and contact terminals due to coldness will be cause for polarizer damage, stain and dirt on product. When necessary to take out the products from some place at low temperature for test, etc. It is required for them to be warmed up in a container once at the temperature higher than that of room. (7) Touching the display area and contact terminals with bare hands and contaminating them are prohibited , because the stain on the display area and poor insulation between terminals are often caused by being touched by bare hands. (There are some cosmetics detrimental to polarizers. ) (8) In general the quality of glass is fragile so that it tends to be cracked or chipped in handling, specially on its periphery. Because be careful not to give it sharp shock caused by dropping down, etc.

11.5 CAUTION FOR OPERATION

(1) It is an indispensable condition to drive LCD within the specified voltage limit since the higher voltage than the limit causes the shorter LCD life. An electrochemical reaction due to direct current causes LCD’s undesirable deterioration, so that the use of direct current driver should be avoided. (2) Response time will be extremely delayed at lower temperature than the specified operating temperature range and on the other hand LCD’s show dark blue Color in then however those phenomena do not mean Malfunction or out of order with LCD’s which will come back in the specified operation temperature range. (8) If the display area is pushed hard during operation, some font will be abnormally displayed but it resumes normal condition after turning off once. (4) A slight dew depositing on terminals is a cause for electrochemical reaction resulting in terminal open circuit. Please operate the LCD module under the relative condition of 40°C 85%RH.

11.6 STORAGE

In case of storing for a long period of time (for instance ,for years) for the purpose of replacement use, the following ways are recommended. (1) Storage in a polyethylene bag with the opening sealed so as not to enter fresh air outside in it, and with no desiccant. (2) Placing in a dark place where neither exposure to direct sunlight nor light is, keeping temperature in the range from -30 to 80°C (3) Storing with no touch on polarizer surface by anything else. (It is recommended to store them as they have been contained in the inner container at the time of delivery from us.)

11.7 SAFETY

(1) It is recommendable to crash damaged or unnecessary LCD's into pieces and wash off liquid crystal by either of solvents such as acetone and ethanol, which should be burned up later. (2) When any liquid leaked out of a damage glass cell comes in contact with your hands, please wash it off well with soap and water. KAOHSIUNG HITACHI in, |S.

DESIGNATION OF LOT MARK

12.1 LOT MARK

Lot mark is consisted of 4 digits for production lot and 6 digits for production control. [0] OOOOOU re for production control T: Made in Taiwan Week Month Year FIGURE IN FIGURE IN FIGURE IN WEEK FIGURE IN ee Pree [2 [ae | 08 | mar | os | Se [9 _| [2008 | 6 | Ts

12.2 REVISION

a

12.3 LOCATION OF LOT MARK

On the back side of LCM. KAOHSIUNG HITACHI p Sh. ELECTRONICS CO.,LTD. DATE |May.07,'04 7B64PS 2712-SP06Q002-T-2 | PAGE | 12-1/1

PRECAUTION FOR USE (1)A limit sample should be provided by the both parties on an occasion when the both parties agreed its necessity. Judgement by a limit sample shall take effect after the limit sample has been established and confirmed by the both parties. (2) On the following occasions, the handling of the problem should be decided © through discussion and agreement between responsible persons of the both parties. (1) When a question is arisen in the specifications. (2) When a new problem is arisen which is not specified in this specifications. (3) When an inspection specifications change or operating condition change in customer is reported to HITACHI, and some problem is arisen in this specification due to the change. (4) When a new problem is arisen at the customer's operating set for sample evaluation in the customer site. The precaution that should be observed when handling LCM have been explained above. If any points are unclear or if you have any requests , please contact HITACHI. KAOHSIUNG HITACHI Sh. .07,'04 7B64PS 2713- SP06Q002-T-2 | PAGE] 13-1/1 ELECTRONICS CO.,LTD. DATE ayor:o4| =| reeePs ats. srecceca2 [Pace 0

Selected Specification

Hitachi Semiconductor SP06Q002-T overview.

Summary

CUSTOMERS ACCEPTANCE SPECIFICATIONS

Description