DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

www.vishay.com Vishay Sfernice Revision: 13-Feb-15 1 Document Number: 57117 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rotational Position Sensor, Kit Type, Hall Effect Technology

FEATURES

  • Accurate linearity down to ± 0.5 %
  • All electrical angles available up to 360°
  • Extremely long life: greater than 100M cycles
  • Model dedicated to all applications in harsh environments
  • Delivered as a kit: 2 elements
  • Ideally suited for external applications: industrial or off-road markets
  • Sealing level up to: IP68 QUICK REFERENCE DATA Sensor type Kit rota tional, hall effect Output type Wires Market appliance Industrial Dimensions 48 mm x 43 mm x 12 mm ELECTRICAL SPECIFICATIONS PARAMETER STANDARD Supply voltage, Vsupply 5 V ± 0.5 V with regulator = 8 V to 16 V Output mode Analog or PWM CW or CCW Electrical output range, Vout for Vsupply 5 V: 5 % to 95 % Vsupply ratiometric for Vsupply < 11 V: output from 0 V to Vsub - 1 V for Vsupply > 11 V: output from 0 V to 10 V max. Electrical angle,  any angle (1° to 360°) Independent linearity A= ± 1 % (Vsupply) B= ± 0.5 % (Vsupply) No load supply current, Isupply < 16 mA single output < 32 mA redundant output Over voltage protection - output enabled for output (5 V): +20 V for output (10 V): 29 V Reverse voltage protection - output disabled for output (5 V): -10 V for output (10 V): -35 V Temperature coefficient, Vout/T (25 °C) 60 μV/°C typ. Hysteresis < 0.35° Resolution 12 bits Resistive load recommended Rpull-down or Rpull-up: Vout 5 V Min.: 1 k Typ.: 10 k Capacitive load recommended 4.7 nF Start up cycle < 15 ms MECHANICAL SPECIFICATIONS PARAMETER Mounting type 2 oblong holes Housing plastic Output type single output: cable 3 x 0.35 mm redundant: cable 4 x 0.25 mm2 length: 400 mm min.

www.vishay.com Vishay Sfernice Revision: 13-Feb-15 2 Document Number: 57117 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note

  • Nothing stated herein shall be construed as a guarantee of quality or durability. OUTPUT SPECIFICATIONS VOUT PWM ENVIRONMENTAL SPECIFICATIONS Life unlimited mechanical lifetime Rotation speed 120 rpm max. Vibrations 20 g, 10 Hz to 2000 Hz EN60068-2-6 Shocks (1/2 sinus, 11 ms) 50 g EN60068-2-27 Operating temperature range -45 °C; +105 °C Storage temperature range -45 °C; +105 °C Sealing IP67 (up to IP68) Electrostatic discharges ESD contact: ± 4 kV, air: ± 8 kV EN61000-4-2 Radiated electromagnetic emissions 30 MHz to 1GHz EN61000-6-4 Immunity to radiated RF electromagnetic fields

10 V/m

10 V/m, 900 MHz, heating 200 Hz

Immunity to radiated Electromagnetic disturbances 200 V/m, 150 kHz to 1 GHz IEC 62132-2 part 2 Immunity to power frequency magnetic field 150 G (15 mT) external field, DC and 50 Hz -180 180 100 Vsupply in % Travel in ° 95.00 5.00 Electrical angle Single output CW Output 1 Output 2 For Vsupply = 5 V Vout 0.25 V ˠ4.75 V Vout (% Vsupply) 95 % min. 5 % max. T low T: periodicity T high Duty Cycle = Thigh T Time

www.vishay.com Vishay Sfernice Revision: 13-Feb-15 3 Document Number: 57117 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in millimeters Tol.: ± 0.3 mm 15.5 2 x 4.4 2 x 20° Cable PVC 3 x 0.35 mm² or 4 x 0.25 mm² Ø 16 CW signal increase PINOUT Blue signal 1 White Gnd Red V+ PINOUT - Redundant version Blue signal 1 White Gnd Red V+ Yellow signal 2

www.vishay.com Vishay Sfernice Revision: 13-Feb-15 4 Document Number: 57117 For technical questions, contact: sferprecisionpot@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 POSITION MARKERS Position marker A (shaft Ø 4): ACAPTAXEW2566 Position marker B (shaft Ø 6): ACAPTAXEW2567 Position marker C: ACAPTAXEW2568 Shaft reference position: signal 1 = 50 % Shaft referenc e position: signal 1 = 50 % SAP PART NUMBERING SMHE 1 A A 180 C 11 A xxxx MODEL FEATURES LINEARITY ANGLE OUTPUT TYPE OUTPUT SIGNAL SPECIAL REQUEST 1: single output 2: redundant output A: with positioning marker A B: with positioning marker B C: with positioning marker C X: without positioning marker Z: other (custom) A: ± 1 % B: ± 0.5 % 045: 45° 090: 90° 120: 120° 180: 180° 270: 270° 360: 360° xxx: any angle C: cable Z: other 11: in = 5 V; out = 5 V 21: in = 8 V to 16 V; out = 5 V 22: in = 11 V to 16 V; out = 10 V Z: other A: analog CW B: analog CCW C: PWM CW D: PWM CCW E: analog crossed F: PWM crossed Z: other (custom) 0000 7 min. Recommended Shaft End (Flatted) 7 min. 1.7 Ø 4 f8 - 0.010 - 0.028 Set Screw Locking Metal Housing for End Shaft Ø 4 or Ø 6 Flatted Ø 12 Ø 4 or Ø 6 Recommended Shaft End (Flatted) 9 min. 0.4 ± 0.2Ø 8 + 0.1 + 0.06() 6 min. 2 + 0.1 + 0.06() 17.2 Plastic Housing for End Shaft Ø 8 Flatted Ø 8

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.