SMCJ-Q

SMCJ-Q BOURNS

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

n Surface Mount SMC package n Standoff Voltage: 12 to 58 volts n Power Dissipation: 1500 watts n RoHS compliant* n AEC-Q101 compliant**

Applications

n Protection of power buses n Protection of I/O interfaces n Overvoltage transient protection n Automotive – Entertainment applications – Comfort applications n Telecom, computer, industrial and consumer electronics applications Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) SMCJ-Q Transient Voltage Suppressor Diode Series *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **”Q” part number suffix indicates AEC-Q101 compliance. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 200 Amps Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG -55 to +150 °C 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Mounted on 5.0 mm2 (0.03 mm thick) copper pads to each terminal. 3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). General Information Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 12 V up to 58 V. Typical fast response times are less than 1.0 picosecond from 0 V to Breakdown Voltage. Bourns ® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. *RoHS COMPLIANT LEAD FREE *RoHS COMPLIANTVERSIONS AVAILABLE LEAD FREE VERSIONS ARE RoHS COMPLIANT* Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com

Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. SMCJ-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Unidirectional Device Bidirectional Device Breakdown Voltage VBR (Volts) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current Part No. Marking Part No. Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) VRSM (V) IRSM (A) SMCJ12A-Q GEEQ SMCJ12CA-Q BEEQ 13.3 14.7 1 12 1 19.9 75.4 SMCJ13A-Q GEGQ SMCJ13CA-Q BEGQ 14.4 15.9 1 13 1 21.5 69.8 SMCJ14A-Q GEKQ SMCJ14CA-Q BEKQ 15.6 17.2 1 14 1 23.2 64.7 SMCJ15A-Q GEMQ SMCJ15CA-Q BEMQ 16.7 18.5 1 15 1 24.4 61.5 SMCJ16A-Q GEPQ SMCJ16CA-Q BEPQ 17.8 19.7 1 16 1 26 57.7 SMCJ17A-Q GERQ SMCJ17CA-Q BERQ 18.9 20.9 1 17 1 27.6 54.4 SMCJ18A-Q GETQ SMCJ18CA-Q BETQ 20.0 22.1 1 18 1 29.2 51.4 SMCJ20A-Q GEVQ SMCJ20CA-Q BEVQ 22.2 24.5 1 20 1 32.4 46.3 SMCJ22A-Q GEXQ SMCJ22CA-Q BEXQ 24.4 26.9 1 22 1 35.5 42.3 SMCJ24A-Q GEZQ SMCJ24CA-Q BEZQ 26.7 29.5 1 24 1 38.9 38.6 SMCJ26A-Q GFEQ SMCJ26CA-Q BFEQ 28.9 31.9 1 26 1 42.1 35.7 SMCJ28A-Q GFGQ SMCJ28CA-Q BFGQ 31.1 34.4 1 28 1 45.4 33.1 SMCJ30A-Q GFKQ SMCJ30CA-Q BFKQ 33.3 36.8 1 30 1 48.4 31 SMCJ33A-Q GFMQ SMCJ33CA-Q BFMQ 36.7 40.6 1 33 1 53.3 28.1 SMCJ36A-Q GFPQ SMCJ36CA-Q BFPQ 40 44.2 1 36 1 58.1 25.9 SMCJ40A-Q GFRQ SMCJ40CA-Q BFRQ 44.4 49.1 1 40 1 64.5 23.3 SMCJ43A-Q GFTQ SMCJ43CA-Q BFTQ 47.8 52.8 1 43 1 69.4 21.7 SMCJ45A-Q GFVQ SMCJ45CA-Q BFVQ 50 55.3 1 45 1 72.7 20.6 SMCJ48A-Q GFXQ SMCJ48CA-Q BFXQ 53.3 58.9 1 48 1 77.4 19.4 SMCJ51A-Q GFZQ SMCJ51CA-Q BFZQ 56.7 62.7 1 51 1 82.4 18.2 SMCJ54A-Q GGEQ SMCJ54CA-Q BGEQ 60 66.3 1 54 1 87.1 17.3 SMCJ58A-Q GGGQ SMCJ58CA-Q BGGQ 64.4 71.2 1 58 1 93.6 16.1

3312 - 2 mm SMD Trimming Potentiometer 6.5 1.0 0.5 1.5 2.0 3.0 2.5 3.5 4.0 5.0 4.5 5.5 6.0 0.0 05 025 75 100 150125 TL - Lead Temperature (°C) Steady State Power Dissipation (W) CJ - Junction Capacitance (pF) IFSM - Peak Forward Surge Current (Amps) 180 200 120 140 160 100 1 10 100 Number of Cycles at 60 Hz Pulse Width 8.3 ms Single Half Sine-Wave 100000 1 10 100 1000 VBR - Reverse Breakdown Voltage (V) 1000 100 0.1 0.1 µs 1.0 µs 10 µs 10 ms Td, Pulse Width (Seconds) PPPM - Peak Pulse Power (kW) 100 µs 1.0 ms 100 1000 10000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Unidirectional @ VR Bidirectional @ VR Bidirectional v-0v Unidirectional v-0v 100 0 1.0 2.0 3.0 4.0 T, Time (ms) IP, Peak Pulse Current (%) TA=25 °C TP TR=10 µs Half value= IRSM Peak value (IRSM) Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 10 x 1000 waveform as defined by R.E.A. 8.0 x 8.0 mm 0.31 x 0.31 inch Copper Pad Areas TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 100 05 025 75 100 150125 Ambient Temperature ( Peak Pulse Power Derating in Percent of Peak Power or Current °C) 10 x 1000 Waveform as Defined by R.E.A. SMCJ-Q Transient Voltage Suppressor Diode Series Performance Graphs Peak Pulse Power Derating Curve Maximum Non-Repetitive Surge Current Pulse Waveform Typical Junction Capacitance Pulse Rating Curve Steady State Power Derating Curve Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.

3312 - 2 mm SMD Trimming Potentiometer Product Dimensions Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. SMCJ-Q Transient Voltage Suppressor Diode Series Recommended Footprint Physical Specifications No cathode band indicates bidirectional device DIMENSIONS: MM (INCHES) A C B G F D C B MM (INCHES)DIMENSIONS: H E A A A C C F E B B D MM (INCHES)DIMENSIONS: Dimension SMC (DO-214AB) A 6.60 - 7.11 (0.260 - 0.280) B 5.59 - 6.22 (0.220 - 0.245) C 2.90 - 3.20 (0.115 - 0.125) D 0.15 - 0.31 (0.006 - 0.112) E 7.75 - 8.13 (0.305 - 0.320) F 0.203 MAX. (0.008) G 2.00 - 2.62 (0.079 - 0.103) H 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) Dimension SMC (DO-214AB) A (Max.) 4.69 (0.185) B (Min.) 3.07 (0.121) C (Min.) 1.52 (0.060) How to Order SMCJ 12 CA - Q Package SMCJ-Q = SMC/DO-214AB Working Peak Reverse Voltage 2 = 12 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel QH = AEC-Q101 Compliant, 7-inch Reel Typical Part Marking YWW XXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER MANUFACTURER’S TRADEMARK DEVICE ID Environmental Specifications

CDDFN5-0504N - TVS/Steering Diode Array Packaging Information PA F E T 120 ° D D1 C Index Hole W B 10 pitches (min.) Direction of Feed 10 pitches (min.) End Trailer Device Leader Start d The product will be dispensed in tape and reel format (see diagram below). Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. DIMENSIONS: MM (INCHES) REV. 02/18 SMCJ-Q Transient Voltage Suppressor Diode Series Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Item Symbol SMC (DO-214AB) 7-Inch Reel 13-Inch Reel Carrier Width A 6.0 ± 2.0 (0.236 - 0.079) Carrier Length B 8.3 ± 0.20 (0.327 ± 0.008) Carrier Depth C 2.5 ± 0.20 (0.098 ± 0.008) Sprocket Hole d 1.50 ± 0.10 (0.059 ± 0.004) Reel Outside Diameter D 178 (7.008) 330 (12.992) Reel Inner Diameter D1 50.0 (1.969) MIN. Feed Hole Diameter D2 13.0 +0.50/-0.20 Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 7.50 ± 0.10 (0.295 ± 0.004) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.10 (0.079 ± 0.004) Overall Tape Thickness T 0.30 ± 0.10 (0.012 ± 0.004) Tape Width W 16.00 ± 0.30 (0.630 ± 0.012) Reel Width W1 22.4 (0.882) MAX. Quantity per Reel -- 500 3000