DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 13

Technical content

Features

  • 130 V-tolerant TVS (IEC61000-4-5)
  • BUS-to-OUT nFET: 12 m Ω/6 A, 28 V tolerant
  • BUS-to-SYS nFET: 24 m Ω/6 A B2B RB
  • Always ON, BUS LDO: ±10% tol, 0.1 A capable
  • BUS UVLO & OVLO Protection
  • OVP Response Time: 200 ns
  • Push-pull PG (Power Good) Output
  • Thermal Shutdown Protection
  • Active-HIGH IC Shutdown Input
  • Active-LOW ON1 Input (BUS-to-OUT)
  • Active-HIGH ON2 Input (BUS-to-SYS)
  • 28-ball CSP, 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch
  • Pb-Free / Halogen-Free / RoHS Compliant Packaging Pin Configuration

Applications

  • Wearable Devices
  • Tablet PCs and Smartphones ON1BUSOKSDPG ON2BUSOUTOUT BUSBUSBUSOUT BUSBUSBUSSYS BUSBUSBUSSYS BUSBUSBUSSYS GNDGNDGNDGND 1234 A B C D E F G (Laser Marking View) 2.98 x 1.69 x 0.44 mm, 0.4 mm pitch Pin A1 Index Mark State Machine + Gate Drivers BUS UVLO TVS OVLO VBUSOK BUS Thermal Shutdown SD ON1 ON2 GND 12 mΩ 24 mΩ CLOAD1 CLOAD2 CLOAD3 CIN Closed Open Closed Open Multiple Contacts Multiple Contacts Regulator VSYS VOUTVBUS BUSOK PG SYS OUT

000-0059H1302-101 Page 2 of 13 SLG59H1302C Pin Description

Ordering Information

Pin Name Pin # Type Pin Description BUS B3, C2, C3, C4, D2, D3, D4, E2, E3, E4, F2, F3, Input IC power supply and power switch input (13 contacts) OUT B1, B2, C1 Output Power switch output to Load (3 contacts) SYS D1, E1, F1 Output Power switch output to VBAT (3 contacts) BUSOK A3 Output Always ON fixed output voltage from internal LDO ON2 B4 Digital Input BUS-to-SYS Switch Enable; Asserted active high digital input; 1 MΩ pull-down ON1 A4 Digital Input BUS-to-OUT Switch Enable; Asserted active low digital input; 1 MΩ pull-down SD A2 Digital Input IC shutdown; asserted active high; 1 MΩ pull-down PG A1 Digital Output Asserted active-high push-pull output. GND G1, G2, G3, G4 GND Analog GND (4 contacts) Part Number Type Production Flow SLG59H1302C WLCSP 28L Industrial, -40 °C to 85 °C SLG59H1302CTR WLCSP 28L (Tape and Reel) Industrial, -40 °C to 85 °C

000-0059H1302-101 Page 3 of 13 SLG59H1302C Absolute Maximum Ratings Parameter Description Conditions Min. Typ. Max. Unit VBUS to GND Power Switch Input Voltage to Ground Continuous -0.3 -- 28 V VSYS to GND Power Switch Output Voltage to Ground Continuous -0.3 -- 6 V Max pulse width 0.1s -0.3 -- 7 V VOUT to GND Power Switch Output Voltage to GND ON1 = LOW -0.3 -- V BUS V ESDHBM ESD Protection Human Body Model, All pins 2000 -- -- V ESDCDM ESD Protection Charged Device Model, All pins 1000 -- -- V ESDSURGE ESD Protection VBUS Surge Protection, OUT IDS Maximum Current from BUS to OUT Continuous -0.3 -- 6 A Max pulse width 10 ms -0.3 -- 7 A SYS IDS Maximum Current from BUS to SYS Continuous -0.3 -- 6 A Max pulse width 10 ms -0.3 -- 7 A BUSOK IDS Maximum Current from BUS to BUSOK Continuous -0.3 -- 100 mA θJA Package Thermal Resistance, Junction-to-Ambient 2.98 x 1.69 mm 28L WLCSP; Determined using a 1 in2, 1 oz. copper pad under each BUS, SYS, and OUT terminal and FR4 pcb material. -- 45 -- °C/W Note: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above t hose indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Recommended Operating Conditions TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Min. Typ. Max. Unit Basic Operation VBUS IC Power supply and power switch input voltage 2.7 -- 13.3 V CIN/COUT Input and Output Capacitance -- 1 -- µF CSYS SYS Capacitance 47 -- -- µF CBUSOK Output Capacitance -- 4.7 -- µF TA Operating Temperature -40 -- 85 °C

Electrical Characteristics

TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Conditions Min. Typ. Max. Unit Basic Operation (VBUS = 12 V, no load) lQ Input Quiescent Current V BUS = 4 V, ON1 = LOW, No Load -- 180 -- µA

000-0059H1302-101 Page 4 of 13 SLG59H1302C lIN_Q Input Supply Current when VOUT_OVLO or VSYS_OVLO threshold is reached VBUS = 15 V, ON1 = LOW, ON2 = HIGH, BUSOK = 1 kΩ Load -- 4.2 -- mA lSD Shutdown Current V BUS = 12 V -- 1 2 µA VBUS_UVLO Under Voltage Trip Level T A = 0 °C to 85 °C 2.3 2.4 2.7 V tBUS_START Soft-Start Time See ti ming diagram -- 30 -- ms THERMON Thermal Shutdown Turn-on Temperature -- 145 -- °C THERMHYS Thermal Shutdown Hysteresis -- 20 -- °C BUS To OUT Switch VOUT_OVLO Over Voltage Trip Level V BUS Rising 13.3 13.9 14.5 V VOUT_HYS VOUT Hysteresis -- 350 -- mV RDSON ON Resistance VBUS = 12 V, IOUT = 0.1 A, TA = 25 °C -- 12 14 m Ω VBUS = 12 V, IOUT = 0.1 A, TA = 85 °C -- 16 18 m Ω tDEB_OUT Debounce Time ON1 = 0 V; VBUS > VBUS_UVLO to 0.1 x VOUT; See timing diagram -- 15 -- ms tON_OUT Switch Turn-On Time RLOAD = 100 Ω, CLOAD = 4.7 μF; VOUT from 0.1 x VBUS to 0.9 x VBUS -- 2.5 -- ms tOVP_OUT

1 Overvoltage Protection Time

ILOAD = 100 mA, no CLOAD; VBUS step up over VOUT_OVLO to VOUT start seperate from VBUS -- 200 -- ns tOFF_OUT Switch Turn-Off Time 50 % ON1 ↑ to 0.9 x VOUT; VBUS = 12 V RLOAD = 100 Ω, no CLOAD -- 5 -- μs BUS To SYS Switch VSYS_OVLO Over Voltage Trip Level V BUS Rising 4.9 5.25 5.5 V VSYS_HYS VSYS Hysteresis -- 110 -- mV RDSON ON Resistance VBUS = 4.5 V, ISYS = 0.1 A, TA = 25 °C -- 24 29.6 m Ω VBUS = 4.5 V, ISYS = 0.1 A, TA = 85 °C -- 30 38 m Ω IRCB Reverse Current VSYS = 4.4 V, measured from VBUS to GND1 -- 10 -- nA tDEB_SYS Debounce Time See timing diagram -- 15 -- ms tSYS_START Soft-Start Time See ti ming diagram -- 30 -- ms tON_SYS Switch Turn-On Time RLOAD = 100 Ω, CLOAD = 4.7 μF; VSYS from 0.1 x VBUS to 0.9 x VBUS -- 3.0 -- ms tOVP_SYS ILOAD = 100 mA, no CLOAD; VBUS step up over VSYS_OVLO to VSYS start seperate from VBUS -- 200 -- ns tOFF_SYS Switch Turn-Off Time 50 % ON2 ↓ to 0.9 x VSYS; VBUS = 5 V; RLOAD = 100 Ω, no CLOAD -- 5 -- μs Electrical Characteristics (continued) TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Conditions Min. Typ. Max. Unit

000-0059H1302-101 Page 5 of 13 SLG59H1302C BUSOK VBUSOK BUSOK Output voltage VBUS = 5 V, no load 3.8 4.0 4.4 V VBUS = 12 V, no load 3.8 4.0 4.4 V VBUS = 5 V; BUSOK IDS = 100 mA 3.6 3.8 4.1 V VBUS = 12 V; BUSOK IDS = 100 mA 3.6 3.8 4.1 V Digital Signals VOH_PG PG Output HIGH Voltage ON2 = Low to High, V BUS = 3.4 V to 5 V -- 1.8 -- V VOL_PG PG Output LOW Voltage ON2 = High to Low, V BUS = 3.4 V to 5 V -- -- 0.3 V RPD(ONx, SD) Internal Pull-Down Resistor at ON1, ON2, and SD -- 1 -- M Ω VIH(ONx, SD) Logic Enable HIGH Voltage 0.9 -- -- V VIL(ONx, SD) Logic Enable LOW Voltage -- -- 0.3 V ILKG(BUSOK) BUSOK Leakage Current -- -- 1 µA ILKG(ONx, SD) SD, ONx Leakage current V BUS = 12 V -- -- 5 µA Notes: 1. Based on bench measurement only. Electrical Characteristics (continued) TA = -40 °C to 85 °C (unless otherwise stated) Parameter Description Conditions Min. Typ. Max. Unit

000-0059H1302-101 Page 6 of 13 SLG59H1302C Typical Application Diagram Timing for BUS to OUT Power Up/Down and Normal Operation SLG59H1302C OUT SYS Battery Charger System Battery PMIC ON1 ON2 PG BUSOK Travel Adapter or JIG Cable BUS SD GND C1 C2

000-0059H1302-101 Page 7 of 13 SLG59H1302C Timing for BUS to OUT OVLO Operation (ON1 = LOW) “Always ON” based BUSOK Operation (ON1 = X, ON2 = X, SD = LOW)

000-0059H1302-101 Page 8 of 13 SLG59H1302C Timing for Overall ON/OFF Operation (SD = LOW)

000-0059H1302-101 Page 9 of 13 SLG59H1302C Package Top Marking System Definition 59H1302C Pin 1 Identifier Q123456ARR YYWW 59H1302C - Part ID Field Q123456 - Assembly Lot Traceability Code Field1 A - Assembly Site Code Field 2 RR - Part Revision Code Field2 YY - Year Code Field1 WW - Week Code Field1 Note 1: Each character in code field can be alphanumeric A-Z and 0-9 Note 2: Character in code field can be alphabetic A-Z

000-0059H1302-101 Page 10 of 13 SLG59H1302C Package Drawing and Dimensions

28 Lead WLCSP Package

G F E D C B A GND SYS SYS SYS OUT OUT SD GND BUS BUS BUS BUS OUT PG GND BUS BUS BUS BUS BUS BUSOK

000-0059H1302-101 Page 11 of 13 SLG59H1302C SLG59H1302C 28-pin WLCSP PCB Landing Pattern

000-0059H1302-101 Page 12 of 13 SLG59H1302C Tape and Reel Specifications Carrier Tape Drawing and Dimensions Recommended Reflow Soldering Profile Please see IPC/JEDEC J-STD-020: late st revision for reflow profile based on package volume of 2.09 mm 3 (nominal). More information can be found at www.jedec.org. Package Type # of Pins Nominal Package Size [mm] Max Units Reel & Hub Size [mm] Leader (min) Trailer (min) Tape Width [mm] Part Pitch [mm]per Reel per Box Pockets Length [mm] Pockets Length [mm] WLCSP 28L 2.98x1.69 mm 0.4P Green 28 2.98 x 1.69 x 0.44 3000 3000 178/60 100 400 100 400 8 4 Package Type Pocket BTM Length Pocket BTM Width Pocket Depth Index Hole Pitch Pocket Pitch Index Hole Diameter Index Hole to Tape Edge Index Hole to Pocket Center Tape Width Tape Thickness A0 B0 K0 P0 P1 D0 E F W T WLCSP 28L 2.98x1.69 mm 0.4P Green Refer to EIA-481 specification

000-0059H1302-101 Page 13 of 13 SLG59H1302C

Revision History

6/14/2017 1.00 Production Release 9/18/2017 1.01 Updated EC Table