SFH5130 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

 Integrated photodiode with linear voltage output  Transparent sidelooker package with 3 pins  High sensitivity from 350 nm to 1100 nm  Circular photodiode

Applications

 Photointerrupter

Tstg – 40 … + 85 °C Versorgungsspannung Supply Voltage VDD 6 V Ausgangsspannung Output voltage VOUT < VDD V Elektrostatische Entladung Electrostatic Discharge Human Body Model according to EOS/ESD-5.1-1993 ESD 2 kV Empfohlener Arbeitsbereich Recommended Operating Conditions Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit min. typ. max. Funktionstemperatur Operating Temperature Top - 40 + 25 + 75 °C Betriebsspannung Supply Voltage VDD 4.5 5 5.5 V Kapazitive Ausgangslast Output load capacitance CL 30 nF Kennwerte (TA = 25 °C, VDD = 5 V, RL = 10 kΩ) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit min. typ. max. Stromaufnahme, Ee = 0 Current consumption IDD – 1.5 4.5 mA Dunkelspannung Dark Voltage VD – 1.2 15 mV Spektraler Bereich der Fotoempfindlichkeit Spectral range of sensitivity λ 350 – 1100 nm

Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. photosensitivity λs max – 770 – nm Durchmesser der aktiven Fläche Diameter of active area D – 0.75 – mm Empfindlichkeit1), λ = 428 nm Irradiance responsivity Ne – 1180 – mV/µW/cm2 Ausgangsspannung1) Output Voltage, Ee=1.69 µW/cm2, λ = 428 nm VO 1.0 – 3.2 V Sättigungsspannung, VDD = 4.5V, Ee ≥ 7 µW/cm2 Maximum output voltage swing Vsat 4 4.47 – V Anstiegszeit2), Ee = 0 to Ee = 1.69 µW/cm2 Rise time Abfallzeit, Ee =1.69 to 0 µW/cm2 Fall time Einschwingzeit, to 99% of nominal Settling time tr tf ts 250 250 µs µs µs Temperaturkoeffizient der Dunkelspannung, T = 5 to 45 °C Temperature coefficient of dark voltage ανd – 100 ± 8 + 100 µV/K Temperaturkoeffizient der Ausgangsspannung Temperature coefficient of output voltage Ee = 1.69 µW/cm2, λ = 428 nm, T = 5 to 45 °C ανo – 3 – 0.15 ± 1 + 3 + 0.15 mV/K %/K Power supply rejection ratio3) fac = 100 Hz fac = 1 kHz PSRR PSRR dB dB Output noise voltage f = 0 to 1 kHz f = 10 Hz f = 100 Hz f = 1 kHz < 1 < 1 < 1 µV RMS µV/Hz(1/2) µV/Hz(1/2) µV/Hz(1/2) 1) The sensitivity is characterized using 428 nm LEDs as light source. A constant irradiance over the whole lens area is created. Kennwerte (TA = 25 °C, VDD = 5 V, RL = 10 kΩ) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit min. typ. max.

2) The light source used is a 428 nm LED with following characteristics: tr > 1 µs, tf < 1 µs. The output waveform is monitored on an osciloscope with tr > 100 ns, Zi = 1 MΩ, Ci < 20 pF. The rise time is defined as the time from the 10% to the 90% value, the fall time is defined as the time from the 90% to the 10% value. 3) PSRR is defined as 20 log (VDD(f) / VO(f)) with VDD(0 Hz) = 4.5 V and VO(0 Hz) = 2 V

Srel = f (λ) Output Voltage, VO = f (TA), Ee = 1.69 µW/cm2, λ=428nm Linearity VO = f (Ee) OHF01328 0400 λ 600 800 1000 1200nm relS 100 OHF01348 0.8-25 0.85 0.9 0.95 1.0 1.1 OV VO (25 ˚C) TA 0 25 50 75˚C OHF01379 OV V 1 2 4µW/cm 2 Ee Current Consumption IDD = f (VDD) Current Consumption IDD = f (TA) Directional Characteristics VO = f (φ) OHF01346 1.34 VDD 4.5 5 5.5 6V DDI 1.4 1.5 1.6 1.7 1.8 mA OHF01347 1.3-25 TA 0 25 50 75˚C DDI 1.4 1.5 1.6 1.7 1.8 mA OHF01349 0-75 ϕ OV OmaxV/ -50 -25 0 25 50 75 100 [˚] Dark Voltage VD = f (VDD) Dark Voltage VD = f (TA) OHF01336 0.44 DV VDD 4.5 5 5.5 6V 0.8 1.2 1.6 mV OHF01345 0.4-25 DV TA 0 25 50 75˚C 0.8 1.2 1.6 mV

Maßzeichnung Package Outlines Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). GEOY6061 0.4 (0.016) 0.63 (0.025) R0.9 (0.035) 5˚ 0.9 (0.035) 2.54 (0.100) 4.6 (0.181) 2 (0.079)2 (0.079) 2.5 (0.098) 0.5 (0.020) GND 0.5 (0.020) (4 (0.157)) ø1.77 (0.070) 4.1 (0.161) DDV OUTV

Lötbedingungen Soldering Conditions Wellenlöten (TTW) (nach CECC 00802) TTW Soldering (acc. to CECC 00802) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. OHLY0598 50 100 150 200 250 100 150 200 250 300 T t C s 235 C 10 s C... 260 1. Welle 1. wave 2. Welle 2. wave

5 K/s 2 K/sca 200 K/s

CC... 130100

2 K/s

Zwangskühlung forced cooling Normalkurve standard curve Grenzkurven limit curves