SFH5110-40

SFH5110 OSRAM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Features

 IC with monolithic int egrated photodiode (single chip solution)  Especially suitable for applications of 940 nm  High sensitivity  Various carrier frequencies available  TTL and CMOS compatibility  Output: active Low

Applications

 Remote control module for TV sets, VCRs, hi-fi audio receivers, SAT receivers and compact disk players  For safe data transmission error tolerant codes have to be used

Trägerfrequ. Carrier Frequency kHz Bestellnr. Ordering Code SFH 5110-301) 1) Mindestbestellmenge 80000 Stück / Minimum order quantity 80000 pieces

30 Q62702P5088

SFH 5110-331) 33 Q62702P5089 SFH 5110-36 36 Q62702P5090 SFH 5110-38 38 Q62702P5091 SFH 5110-40 1) 40 Q62702P5092

Grenzwerte (TA = 25 °C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operation and storage temperature range Top Tstg – 10 … + 75 – 30 … + 100 Betriebsspannung Supply voltage VCC 6.3 V Ausgangsspannung Output voltage VOUT 6.3 V Ausgangsstrom Output current IOUT 3m A Verlustleistung Total power dissipation, TA ≤ 85 °C Ptot 50 mW Empfohlener Arbeitsbereich Recommended Operating Conditions Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit min. typ. max. Betriebstemperatur Operating temperature Top –1 0 – 7 5 °C Betriebsspannung Supply Voltage Vcc 4.5 5.0 5.5 V Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit min. typ. max. Stromaufnahme, VCC = 5 V, E = 0 Current consumption ICC –1 . 3 –m A Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity λs max – 940 – nm Spektraler Bereich der Fotoempfindlichkeit Spectral range of sensitivity λ 830 – 1100 nm

Output “High” - (Iout = 10 µA) Output “Low” - (Iout = 500 µA) VOUT high VOUT low Vcc-0.5 0.5 V Trägerfrequenz Carrier frequency SFH 5110-30 SFH 5110-33 SFH 5110-36 SFH 5110-38 SFH 5110-40 f0 – –k H z Min. Bestrahlungsstärke (Testsignal, s. Fig. 3) Min. Threshold irradiance (test signal, see Fig. 3) f = f0, tp,I = 600 µs Ee min – 0.35 0.5 mW/m 2 Min. Eingangspulsbreite „ON“ (Testsignal, s. Fig. 3)1) Min. Input pulse width “ON” (test signal, see Fig. 3)1) tp,I 6/fO –– µs Ausgangspulsbreite „ON“ (Testsignal, s. Fig. 3) Output pulse width “ON” (test signal, see Fig. 3, Ee = 1 mW/m2) tp,O tp,I – 6/fO – tp,I + 6/fO µs 50%-Filterbandbreite, f = fO, EV = 0, VCC = 5 V 50%-Filter bandwidth ∆f50% 3–6k H z 1) Die volle Empfindlichkeit wird bei einer Burstlänge von mindestens 6 Pulsen erreicht. Die Reichweite bei Verwendung eines typischen Senders (SFH 4510/SFH 4515, IF = 500 mA) beträgt etwa 30 m. 1) A minimum burst length of 6 pulses is necessary for fu ll sensitivity. The transmiss ion distance with a typical transmitter (SFH 4510/SFH 4515, IF = 500 mA) is about 30 m. Kennwerte (TA = 25 °C) Characteristics (cont’d) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit min. typ. max.

Figure 3 Optisches Testsignal Optical Test Signal OHF00399 = t p, o ± 6 / fop, It t t t p, I t off, I t p, I Burst wave: carrier frequency fo, Duty cycle = 0.5 Transmitter Detector (Output Signal)

Relative Spectral Sensitivity Srel = f (λ) Relative Sensitivity Ee/Ee, min = f (f0) λ OHF00400 700 Srel 100 nm 800 900 1000 1100 Center Frequency OHF00403 Ee, mine /E 1.5 2.5 3.5 4.5 fo-4 -2 off o +2off o+4kHz Vertical Directivity ϕy ϕ OHF00401 Ee, min 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 [ ]30 60 90 e/E Horizontal Directivity ϕx ϕ OHF00402 E e, min 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 [ ]30 60 90 e

Maßzeichnung Package Outlines Maße in mm (inch) / Dimensions in mm (inch). GEOY6985 1.3 (0.051) 6.1 (0.240) 0.5 (0.020) 3.5 (0.138) 23.4 (0.921) 5.9 (0.232) 1.1 (0.043) 5.9 (0.232) 0.3 (0.012) 3.3 (0.130) 0.6 (0.024) 0.4 (0.016) 2.54 (0.100) 4.9 (0.193) 5.1 (0.201) 2.8 (0.110) 3.0 (0.118) 32.0 (1.260) 30.0 (1.181) 2.54 (0.100)

Lötbedingungen Soldering Conditions Wellenlöten (TTW) (nach CECC 00802) TTW Soldering (acc. to CECC 00802) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserv ed. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. Y ou must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or system s must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. OHLY0598 50 100 150 200 250 100 150 200 250 300 T t C s 235 C 10 s C... 260 1. Welle 1. wave 2. Welle 2. wave

5 K/s 2 K/sca 200 K/s

CC... 130100

2 K/s

Zwangskühlung forced cooling Normalkurve standard curve Grenzkurven limit curves