SFH4111 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

 Peak wavelength of 950 nm  Cylindrical lens  High radiant intensity  Small outline dimensions

Applications

 Tape end detection (VCR e.g.)  Data transmission  Position sensing  Barcode reader  For control and drive circuits  Coin counters

Grenzwerte (TA = 25 °C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40 … + 85 °C Sperrspannung Reverse voltage VR 5 V Durchlaßstrom Forward current IF (DC) 50 mA Stoßstrom, tp = 10 μs, D = 0 Surge current IFSM 1 A Verlustleistung Power dissipation Ptot 75 mW Wärmewiderstand Sperrschicht - Umgebung Thermal resistance junction - ambient RthJA 450 K/W Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlänge der Strahlung Wavelength at peak emission λpeak 950 nm Spektrale Bandbreite bei 50% von Imax Spectral bandwidth at 50% of Imax Δλ 55 nm Abstrahlwinkel horizontal/ vertikal Half angle horizontal/ vertical ϕ ± 30/ 60 Grad deg. Aktive Chipfläche Active chip area A 0.09 mm2 Abmessungen der aktiven Chipfläche Dimensions of the active chip area L × B L × W 0.3 × 0.3 mm² Schaltzeiten, Ie von 10% auf 90% und von 90% auf 10%, bei IF = 50 mA, RL = 50 Ω Switching times, Ιe from 10% to 90% and from 90% to 10%, IF = 50 mA, RL = 50 Ω tr, tf 0.5 µs Kapazität, Capacitance VR = 0 V, f = 1 MHz Co 40 pF

Durchlaßspannung, Forward voltage IF = 20 mA, tp = 20 ms VF 1.25 (≤ 1.6) V Sperrstrom, Reverse current VR = 5V IR 0.01 (≤ 1.0) μA Gesamtstrahlungsfluß, Total radiant flux IF = 20 mA, tp = 20 ms Φe 3.5 mW Temperaturkoeffizient von Ie bzw. Φe, Temperature coefficient of Ie or Φe, IF = 4mA TCI – 1.1 %/K Temperaturkoeffizient von VF, IF = 4mA Temperature coefficient of VF, IF = 4mA TCV – 1.3 mV/K Temperaturkoeffizient von λ, IF = 10 mA Temperature coefficient of λ, IF = 10 mA TCλ + 0.3 nm/K Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit Bestrahlungsstärke1) Irradiance1) d2) = 6mm, IF = 4mA, tp = 20 ms 1) Auf einem Detektor erzeugte Bestrahlungsstärke. Irradiance generated on a detector. 2) Entfernung zwischen Vorderseite Beinchen und Detektorebene. Distance between leadframe front side and detection area. Ee Kennwerte (TA = 25 °C) Characteristics (cont’d) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit

Relative Spectral Emission Irel = f (λ) Forward Current IF = f (VF), Single pulse, tp = 20 μs OHR01938 λ relΙ 880 920 960 1000 nm 1060 100 V OHF00367 F 10-2 Ι F 12340.5 1.5 2.5 V 10-1 100 101 102 103 104 mA Radiant Intensity Single pulse, tp = 20 μs Radiation Characteristics/ vertical Ιrel = f (ϕ) Radiation Characteristics/ horiz. Ιrel = f (ϕ) Ie Ie 100 mA = f (IF) OHF00369 10-1 100 1012 10 10 3 -310 -210 -110 100 110 e (100 mA)Ι Ι F eΙ mA OHL01543 100˚ 90˚ 80˚ 70˚ 60˚ 50˚ 0.2 0.4 0.6 0.8 1.0ϕ -90˚ +90˚ OHL01542 100˚ 90˚ 80˚ 70˚ 60˚ 50˚ 0.2 0.4 0.6 0.8 1.0ϕ -90˚+90˚ Max. Permissible Forward Current IF = f (TA) 00 ˚C T IF mA OHL01541 A 20 40 60 80 100 = 480 K/WRthJA

Maßzeichnung Package Outlines Maße in mm (inch) / Dimensions in mm (inch). GEO06053 3 ±0.25 3.3 ±0.3 ±0.58.5 ±0.14.5 5.6 ±0.2 0.1 max. 0.1 max. 2.54 ±0.252.1 (0.75) 1.1 ±0.2 0.5 ±0.1 R0.75 ±0.1 0.5 ±0.1 Pinout 1. Cathode 2. Anode Area not flat

Empfohlenes Lötpaddesign Wellenlöten (TTW) Recommended Solder Pad TTW Soldering Maße in mm (inch) / Dimensions in mm (inch). 4 (0.157) OHLPY985 4.8 (0.189)

Lötbedingungen Soldering Conditions Wellenlöten (TTW) (nach CECC 00802) TTW Soldering (acc. to CECC 00802) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserv ed. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of tr ansport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or system s must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. OHLY0598 50 100 150 200 250 100 150 200 250 300 T t C s 235 C 10 s C... 260 1. Welle 1. wave 2. Welle 2. wave

5 K/s 2 K/sca 200 K/s

CC... 130100

2 K/s

Zwangskühlung forced cooling Normalkurve standard curve Grenzkurven limit curves