SFH4000

SFH4000 OSRAM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

 High output power: 35mW  Very small package: (LxWxH) 1.7 mm x 0.8 mm x 0.65 mm  Very short switching times (10ns)  High pulse handling capability  Suitable for IR reflow soldering  Available on tape and reel

Applications

 Miniature photointerrupters  Industrial electronics  For drive and control circuits  Sensor technology  Alarm and safety equipment  IR free air transmission

Grenzwerte (TA = 25 °C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40… + 100 °C Sperrspannung Reverse voltage VR 3V Durchlaßstrom Forward current IF 100 mA Stoßstrom, τ = 10 µs, D = 0 Surge current IFSM 2.2 A Verlustleistung Power dissipation Ptot 180 mW Wärmewiderstand Sperrschicht - Umgebung bei Montage auf FR4 Platine, Padgröße je 16 mm2 Thermal resistance junction - ambient mounted on PC-board (FR4), padsize 16 mm2 each Wärmewiderstand Sperrschicht - Lötstelle bei Montage auf Metall-Block Thermal resistance junction - soldering point, mounted on metal block RthJA RthJS 450 ≈ 250 K/W K/W

Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlänge der Strahlung Wavelength at peak emission IF = 100 mA, tp = 20 ms λpeak 950 nm Spektrale Bandbreite bei 50% von Imax Spectral bandwidth at 50% of Imax IF = 100 m A ∆λ 40 nm Abstrahlwinkel Half angle ϕ± 80 Grad deg. Aktive Chipfläche Active chip area A 0.09 mm 2 Abmessungen der aktiven Chipfläche Dimensions of the active chip area L × B L × W 0.3× 0.3 mm Schaltzeiten, Ie von 10% auf 90% und von 90% auf 10%, bei IF = 100 mA, RL = 50 Ω Switching times, Ιe from 10% to 90% and from 90% to 10%, IF = 100 mA, RL = 50 Ω tr, tf 10 ns Kapazität, Capacitance VR = 0 V, f = 1 MHz C o 15 pF Durchlaßspannung, Forward voltage IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 µs VF VF 1.5 (≤ 1.8) 3.2 (≤ 4.3) V V Sperrstrom, Reverse current VR = 3 V IR 0.01 (≤ 1) µA Gesamtstrahlungsfluß, Total radiant flux IF = 100 mA, tp = 20 ms Φ e 35 mW Temperaturkoeffizient von Ie bzw. Φ e, IF = 100 mA Temperature coefficient of Ie or Φ e, IF = 100 mA TC I – 0.44 %/K Temperaturkoeffizient von VF, IF = 100 mA Temperature coefficient of VF, IF = 100 mA TC V – 1.5 mV/K Temperaturkoeffizient von λ, IF = 100 mA Temperature coefficient of λ, IF = 100 mA TC λ + 0.2 nm/K

Strahlstärke Ie in Achsrichtung gemessen bei einem Raumwinkel Ω = 0.01 sr Radiant Intensity Ie in Axial Direction at a solid angle of Ω = 0.01 sr Bezeichnung Parameter Symbol Werte Values Einheit Unit Strahlstärke Radiant intensity IF = 100 mA, tp = 20 ms Ie min Ie typ 1.6 4.4 mW/sr mW/sr Strahlstärke Radiant intensity IF = 1 A, tp = 100 µs Ie typ 20 mW/sr

Relative Spectral Emission Irel = f (λ) Forward Current IF = f (VF) single pulse, tp = 20 µs Radiation Characteristics Irel = f (ϕ) OHF00777 nm800 Ιerel λ 0 850 900 950 1000 1100 100 OHF00784 10 -3 V mA ΙF V F 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 OHF00614 100˚ 90˚ 80˚ 70˚ 60˚ 50˚ 0.2 0.4 0.6 0.8 1.0ϕ Radiant Intensity Single pulse, tp = 20 µs Permissible Pulse Handling Capability IF = f (τ), TA = 25 °C, duty cycle D = parameter Ιe Ιe 100 mA = f (IF) e e (100 mA) mA OHF00809 FΙ Ι Ι 10 4010 10 1 10 23 10 10 -3 10 -2 10 -1 10 2 OHF00040 10-5 FI T Pt Pt T pt FI 0.005 0.01 0.02 0.05 D 10-4 10-3 10-2 10-1 100 101 210s 0.1 0.2 0.5 -110 110 100 A Max. Permissible Forward Current IF = f (TA) 2004-01-28 OHR00883 FΙ 100 120 20 40 60 80 100 120 mA TA R thjA= 450 K/W

Ma ßzeichnung Package Outlines Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Package Epoxy, SmartLED (SCD 80) Colour colourless, light diffused Package marking Anode GPLY6089 Package 0.3 (0.012) +0.05 (0.002) 7˚ max +0.02 (0.001) marking marking Package

IR-Reflow Lötprofil (nach IPC 9501) IR Reflow Soldering profile (acc. to IPC 9501) Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. OHLA0685 0:00 T t min 100 150 200 250 0:30 1:00 1:30 2:00 2:30 3:00 3:30 4:00 4:30 5:00 5:30 2-3 K/s 2-3 K/s T = 183 ˚C = 70 s t maxT = 245 ˚C