SFH3710 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 Very small SMT package  Adapted to human eye sensitivity ( Vλ)

Applications

 Ambient light detector  Exposure meter for dayli ght and artificial light  Sensor for Backlight-Dimming  For control and drive circuits t

Grenzwerte (TA = 25 ° C) Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40 … + 85 ° C Kollektor-Emitterspannung Collector-emitter voltage VCE 5.5 V Kollektorstrom Collector current IC 20 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 0.5 V Kennwerte (TA = 25 ° C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity λSmax 570 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax λ 350 … 950 nm Bestrahlungsempfindliche Fläche Radiant sensitive area A 0.29 mm2 Abmessung der Chipfläche Dimensions of chip area L × B L × W 0.75 × 0.75 mm × mm Halbwinkel Half angle ϕ ± 60 Grad. deg. Kapazität, VCE = 0 V, f = 1 MHz, E = 0 Capacitance CCE 4 pF Dunkelstrom Dark current VR = 5 V ICEO 3 (< 50) nA Temperturkoeffizient Temperature Coefficient Normlicht A / Standard Light A λ = 550 nm TK TK550 nm 0.9 0.78 %/K %/K

Kennwerte (TA = 25 ° C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit -2 -3 -4 Fotostrom Photocurrent Ee = 10 µW/cm², λ = 560 nm, VCE = 5 V Ev = 1000 lx, Normlicht/Standard light A IPCE 2.5…5 220 4…8 350 6.3…12.5 570 µA µA Kollektor-Emitter-Sättigungsspannung Collector-emitter saturation voltage IC = IPCEmin λ = 560 nm 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe 1) IPCEmin is the min. photocurrent of the specified group VCEsat 100 100 100 mV

Relative Spectral Sensitivity Srel = f (λ) Collector-Emitter Capacitance CCE = f (VCE) Directional Characteristics Srel = f (ϕ) 100 400 500 600 700 800 900 1000 1100 lambda / nm Srel / % 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 CCE pF VVCE OHF01402 40 30 20 10 20 40 60 80 100 1200.40.60.81.0 ϕ 0.2 0.4 0.6 0.8 1.0 100 Photocurrent IPCE = f (EV), VCE = 5 V 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 Ev (lx) Ipce (mA) Photocurrent IPCE = f (EV), VCE = 5 V normalized to 1000lx 100 Ev (lx) Ipce rel (%)

Maßzeichnung Package Outlines Maße in mm (inch) / Dimensions in mm (inch) Empfohlenes Lötpaddesign Recommended Solderpad Design Maße in mm / Dimensions in mm OHFP2578 3.2 1.25 Component location on pad Bauteil positioniert

Lötbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 Reflow Lötprofil für bleifreies Löten (nach J-STD-020C) Reflow Soldering Profile for lead free soldering (acc. to J-STD-020C) Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserv ed. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of tr ansport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or system s must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. OHLA0687 T t s 120 s max 100 150 200 250 300 Ramp Up 100 s max 50 100 150 200 250 300 Ramp Down

6 K/s (max)

3 K/s (max)

25 ˚C 30 s max 260 ˚C+0 ˚C -5 ˚C 245 ˚C±5 ˚C 240 ˚C 255 ˚C 217 ˚C Maximum Solder Profile Recommended Solder Profile 235 ˚C-0 ˚C +5 ˚C Minimum Solder Profile 10 s min