SFH320_01 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

 Especially suitable for applications from 380 nm to 1150 nm (SFH 320) and of 880 nm (SFH 320 FA)  High linearity  P-LCC-2 package  Available in groups  Suitable for all soldering methods

Applications

 Miniature photointerrupters  Punched tape readers  Industrial electronics  For control and drive circuits

SFH 320, SFH 320 FA Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40… + 100 °C Kollektor-Emitterspannung Collector-emitter voltage VCE 35 V Kollektorstrom Collector current IC 15 mA Kollektorspitzenstrom, τ < 10 µs Collector surge current ICS 75 mA Verlustleistung, TA = 25 °C Total power dissipation Ptot 165 mW W ärmewiderstand für Montage auf PC-Board Thermal resistance for mounting on pcb RthJA 450 K/W

SFH 320, SFH 320 FA 2001-02-22 3 Kennwerte (TA = 25 °C, λ = 950 nm) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit SFH 320 SFH 320 FA Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity λSm a x 860 900 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax λ 380 … 1150 730 … 1120 nm Bestrahlungsempfindliche Fläche (∅ 240 µm ) Radiant sensitive area A 0.045 0.045 mm 2 Abmessung der Chipfläche Dimensions of chip area L × B L × W 0.45× 0.45 0.45 × 0.45 mm × mm Abstand Chipoberfläche zu Geh äuseoberfläche Distance chip front to case surface Halbwinkel Half angle ϕ± 60 ± 60 Grad deg. Kapazität, VCE = 0 V, f = 1 MHz, E =0 Capacitance C CE 5.0 5.0 pF Dunkelstrom Dark current VCE = 25 V, E =0 ICEO 1 (≤ 200) 1 ( ≤ 200) nA

SFH 320, SFH 320 FA Directional Characteristics Srel = f (ϕ) Die Fototransistoren werden nach ihrer Fotoempfindlichkeit gruppiert und mit arabischen Ziffern gekennzeichnet. The phototransistors are grouped according to their spectral sensitivity and distinguished by arabian figures. Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit SFH 320/FA -2 -3 -4 Fotostrom, λ = 950 nm Photocurrent Ee = 0.1 mW/cm2, VCE = 5 V SFH 320: Ev = 1000 Ix, Normlicht/standard light A, VCE = 5 V IPCE IPCE ≥ 16 16 ... 32 420 25 ... 50 650 40 ... 80 1000 µA µA Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 kΩ tr, tf 76 7 8 µs Kollektor-Emitter- Sättigungsspannung Collector-emitter saturation voltage IC = IPCEmin 1) × 0.3, Ee = 0.1 mW/cm2 VCEsat 150 150 150 150 mV 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 1) IPCEmin is the min. photocurrent of the specified group. OHF01402 40 30 20 10 20 40 60 80 100 1200.40.60.81.0 ϕ 0.2 0.4 0.6 0.8 1.0 100

SFH 320, SFH 320 FA 2001-02-22 5 Relative Spectral Sensitivity, SFH 320 Srel = f (λ) Total Power Dissipation Ptot = f (TA) Dark Current ICEO = f (TA), VCE = 5 V, E = 0 λ OHF01121 relS 400 600 800 1000 1200 100 nm OHF00871 totP 120 160 mW 200 20 40 60 80 ˚C 100 TA T OHF01530 A CEOΙ -110 10 0 10 1 10 2 10 3 -25 nA 0 25 50 75 100˚C Relative Spectral Sensitivity, SFH 320 FA Srel = f (λ) Photocurrent IPCE = f (VCE ), Ee = Parameter Capacitance C CE = f (VCE ), f = 1 MHz, E = 0 V OHF01529 CE PCEΙ 010 10 -2 10 -1 mA V5 10 15 20 25 30 35 mW cm 20.1 0.25 2cm mW 0.5 2cm mW 1 2cm mW V OHF01528 CE -210 CEC 10 -1 10 0 10 1 10 2 V 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 5.0 pF Photocurrent IPCE = f (Ee), VCE = 5 V Dark Current ICEO = f (VCE ), E = 0 Photocurrent IPCE /IPCE25 ° = f (TA), VCE = 5 V E OHF01924 e PCEΙ 10 -1 10 -3 10 -2 10 0 10 0 10 1 10 2 10 3 2mW/cm µ A V OHF01527 CE CEOΙ -310 10 -2 10 -1 10 0 10 1 0 5 10 15 20 25 30 35 V nA T OHF01524 A -25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 ΙPCE PCEΙ 25 C

SFH 320, SFH 320 FA Ma ßzeichnung Package Outlines Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). GPLY6030 0.7 (0.028) 0.9 (0.035) 1.7 (0.067) 2.1 (0.083) 0.12 (0.005) 0.18 (0.007) 0.5 (0.020) 3.7 (0.146) 0.4 (0.016) 0.6 (0.024) 2.6 (0.102) 3.0 (0.118) 2.1 (0.083) 2.3 (0.091) Collector marking 3.0 (0.118) 3.4 (0.134) (2.4) (0.095) 0.1 (0.004) (typ.) 4˚±1

SFH 320, SFH 320 FA 2001-02-22 7 Zusätzliche Informationen über allgemeine Lötbedingungen erhalten Sie auf Anfrage. For additional information on general soldering conditions please contact us. Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. Löthinweise Soldering Conditions Bauform Types Tauch-, Schwall- und Schlepplötung Dip, Wave and Drag Soldering Reflowlötung Reflow Soldering Lötbad- temperatur Temperature of the Soldering Bath Maximal zulässige Lötzeit Max. Perm. Soldering Time Abstand Lötstelle – Geh äuse Distance between Solder Joint and Case Lötzonen- temperatur Temperature of Soldering Zone Maximale Durchlaufzeit Max. Transit Time TOPLED 260 °C 10 s – 245 °C1 0 s