SFH3100F

SFH3100F OSRAM

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

Silicon NPN Phototransistor with Daylight - Cutoff Filter Version 1.5 SFH 3100 F

Ordering Information

Features: Spectral range of sensitivity: (typ) 850 ... 1100 nm

• Package: Miniature Sidelooker, Epoxy
• Special: Narrow half angle
• Small outline dimensions
• Same package as IRED SFH 4141
• High coupling factor in light barriers with SFH 414 1
• Easy identification of SFH 3100 F (black package) a nd SFH 4141 (clear package)

Applications

Detector in photointerrupters

• Data transmission
• Position sensing
• Barcode reader
• For control and drive circuits
• Coin counters Type: Photocurrent Ordering Code IPCE [µA] λ = 950 nm, E e = 0.5 mW/cm 2, VCE = 5 V SFH 3100 F > 400 Q62702P5073 SFH 3100 F-2/3/4 630 ... 3200 Q62702P5475 Note: Only one bin within one packing unit (variati on less than 2:1)

Version 1.5 SFH 3100 F Maximum Ratings (TA = 25 °C) Characteristics (TA = 25 °C) Parameter Symbol Values Unit Operating and storage temperature range T op ; T stg -40 ... 85 °C Collector-emitter voltage V CE 35 V Collector current IC 50 mA Collector surge current (τ < 10 µs) ICS 100 mA Emitter-collector voltage V EC 7 V Total Power dissipation P tot 150 mW Thermal resistance junction - ambient R thJA 280 K/W ESD withstand voltage (acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM) VESD 2000 V Parameter Symbol Values Unit Wavelength of max. sensitivity (typ) λ S max 920 nm Spectral range of sensitivity (typ) λ 10% (typ) 850 ... 1100 nm Radiant sensitive area (typ) A 0.11 mm 2 Dimensions of chip area (typ) L x W (typ) 0.55 x 0.55 mm x mm Half angle (typ) ϕ ± 14 ° Capacitance (VCE = 0 V, f = 1 MHz, E = 0) (typ) C CE 7.5 pF Capacitance (VCE = 5 V, f = 1 MHz, E = 0) (typ) C CE 4 pF Photocurrent (λ = 950 nm, E e = 0.5 mW/cm 2, V CE = 5 V) IPCE ≥ 0.4 µA Dark current (VCE = 20 V, E = 0) (typ (max)) ICE0 1 (≤ 50) nA Rise and fall time (IC = 1 mA, V CC = 5 V, R L = 1 kΩ) (typ) t r, t f 7 , 9 µs Collector-emitter saturation voltage (Threefold saturated) (typ (max)) VCEsat 140 (≤ 400) mV

Version 1.5 SFH 3100 F 2016-01-04 3 Grouping (TA = 25 °C, λ = 950 nm) Group Min Photocurrent Max Photocurrent Ee = 0.5 mW/cm 2, V CE = 5 V Ee = 0.5 mW/cm 2, V CE = 5 V IPCE, min [µA] IPCE, max [µA] SFH 3100 F - 1 400 800 SFH 3100 F - 2 630 1250 SFH 3100 F - 3 1000 2000 SFH 3100 F - 4 1600 3200 SFH 3100 F - 5 2500 5000 Note.: I PCEmin is the min. photocurrent of the specified group. Relative Spectral Sensitivity 1) page 8 Srel = f(λ) Photocurrent 1) page 8 IPCE = f(E e), VCE = 5 V 700 nm OHF04046 100 λ relS 1100800 900 1000 E OHF00378 e PCEΙ 10-3 10-3 10-2 100 10-2 10-1 100 101 2mW/cm mA -110

Version 1.5 SFH 3100 F Photocurrent 1) page 8 IPCE = f(V CE ), E e = Parameter Photocurrent 1) page 8 IPCE / I PCE (25°C) = f(T A), V CE = 5 V Dark Current 1) page 8 ICEO = f(V CE ), E = 0 Dark Current 1) page 8 ICEO = f(T A), E = 0 V OHF00386 CE PCEΙ 0 0 10 20 30 40V 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 mA 1.0 mW/cm 0.5 mW/cm 0.25 mW/cm 0.1 mW/cm T OHF01524 A -25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 ΙPCE PCEΙ 25 C OHF04049 VCE 010 101 10-1 10-2 CEOI nA

0 V 5 10 15 20 25 30 35

-210 -110 100 110 102 310 104 -25 0 25 50 75 100˚C

Version 1.5 SFH 3100 F 2016-01-04 5 Collector-Emitter Capacitance 1) page 8 CCE = f(V CE ), f = 1 MHz, E = 0 Power Consumption Ptot = f(T A) Package Outline Dimensions in mm (inch). Package Miniature Sidelooker, Epoxy pF OHF04051 CEC CEV 10-3 10-2 10-1 100 101 102V T OHF00381 A totP 0 20 40 60 80 100 100 120 140 160 mW GEOY6976 2.54 (0.100) 1.04 (0.041) 3.1 (0.122) R 0.9 (0.035) 0.5 (0.020) x 45˚ 0.5 (0.020) 1.42 (0.056) Cathode 1.04 (0.041) 0.84 (0.033) 0.9 (0.035) 60˚ 3.0 (0.118) 0.6 (0.024) Emitter/ 2.0 (0.079) 2.8 (0.110) 0.4 (0.016) 16.0 (0.630) 17.27 (0.680) 1.22 (0.048) 2.9 (0.114) R 0.7 (0.028) 0.84 (0.033) 3.9 (0.154) 0.3 (0.012) 0.7 (0.028) 0.64 (0.025) 0.84 (0.033) 1.6 (0.063) 1.4 (0.055) 1.3 (0.051) 1.1 (0.043)

Version 1.5 SFH 3100 F Recommended Solder Pad Dimensions in mm. Note: pad 1: emitter TTW Soldering IEC-61760-1 TTW 00 s OHA04645 100 150 200 250 300 t T 235 ˚C - 260 ˚C First wave 20 40 60 80 100 120 140 160 180 200 220 240 Second wave 10 s max., max. contact time 5 s per wave Preheating 100 ˚C 120 ˚C 130 ˚C Typical Cooling ca. 3.5 K/s typical ca. 2 K/s ca. 5 K/s Continuous line: typical process Dotted line: process limits < 150 K

Version 1.5 SFH 3100 F 2016-01-04 7 Disclaimer Language english will prevail in case of any discre pancies or deviations between the two language word ings. Attention please! The information describes the type of component and shall not be considered as assured characteristics . Terms of delivery and rights to change design reser ved. Due to technical requirements components may c ontain dangerous substances. For information on the types in question please con tact our Sales Organization. If printed or downloaded, please find the latest ve rsion in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport . For packing material that is returned to us unsorted or which w e are not obliged to accept, we shall have to invoi ce you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-suppo rt devices** or systems with the express written ap proval of OSRAM OS. *) A critical component is a component used in a li fe-support device or system whose failure can reaso nably be expected to cause the failure of that life-support device or system, or to affect its safety or the ef fectiveness of that device or system. **) Life support devices or systems are intended (a ) to be implanted in the human body, or (b) to supp ort and/or maintain and sustain human life. If they fail, it i s reasonable to assume that the health and the life of the user may be endangered.

Version 1.5 SFH 3100 F Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not nec essarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.

Version 1.5 SFH 3100 F Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.