SFH310 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Silicon NPN Phototransistor Version 1.3 SFH 310

Ordering Information

Features: Spectral range of sensitivity: (typ) 450 ... 1100 nm

  • Package: 3mm Radial (T 1), Epoxy
  • Special: high photosensitivity

Applications

  • Industrial electronics
  • For control and drive circuits Type: Photocurrent Ordering Code IPCE [µA] λ = 950 nm, E e = 0.5 mW/cm 2, VCE = 5 V SFH 310 630 ... 3200 Q62702P0874 SFH 310-2/3 630 ... 2000 Q62702P3595 Note: Only one bin within one packing unit (variati on less than 2:1)

Version 1.3 SFH 310 Maximum Ratings (TA = 25 °C) Characteristics (TA = 25 °C) Parameter Symbol Values Unit Operating and storage temperature range T op ; T stg -40 ... 100 °C Collector-emitter voltage V CE 35 V Collector current IC 50 mA Collector surge current I CS 100 mA Total Power dissipation P tot 165 mW Thermal resistance R thJA 450 K / W ESD withstand voltage (acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM) VESD 2000 V Parameter Symbol Values Unit Wavelength of max. sensitivity (typ) λ S max 880 nm Spectral range of sensitivity (typ) λ 10% (typ) 450 ... 1100 nm Radiant sensitive area (typ) A 0.11 mm 2 Dimensions of chip area (typ) L x W (typ) 0.5 x 0.5 mm x mm Half angle (typ) ϕ ± 25 ° Capacitance (VCE = 0 V, f = 1 MHz, E = 0) (typ) C CE 7.5 pF Dark current (VCE = 20 V, E = 0) (typ (max)) I CE0 1 (≤ 50) nA

Version 1.3 SFH 310 2016-01-04 3 Grouping (TA = 25 °C, λ = 950 nm) Group Min Photocurrent Max Photocurrent Typ Photocurrent Rise and fall time Ee = 0.5 mW/cm 2, VCE = 5 V Ee = 0.5 mW/cm 2, VCE = 5 V EV = 1000 lx, Std. Light A, V CE = 5 V IC = 1 mA, V CC = 5 V, R L = 1 kΩ IPCE, min [µA] IPCE, max [µA] IPCE [µA] tr, t f [µs] -2 630 1250 3000 5 -3 1000 2000 4800 8 -4 1600 3200 7700 12 Group Collector-emitter saturation voltage IC = I PCEmin x 0.3, E e = 0.5 mW/cm 2 VCEsat [mV] -2 150 -3 150 -4 150 Note.: I PCEmin is the min. photocurrent of the specified group. Relative Spectral Sensitivity 1) page 9 Srel = f(λ) Photocurrent 1) page 9 IPCE = f(E e), VCE = 5 V 400 nm OHF04042 100 λ relS 500 600 700 800 900 1100

Version 1.3 SFH 310 Photocurrent 1) page 9 IPCE = f(V CE ), E e = Parameter Photocurrent 1) page 9 IPCE / I PCE (25°C) = f(T A), V CE = 5 V Dark Current 1) page 9 ICEO = f(V CE ), E = 0 Dark Current 1) page 9 ICEO = f(T A), E = 0 T OHF01524 A -25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 ΙPCE PCEΙ 25 C OHF04049 VCE 010 101 10-1 10-2 CEOI nA

0 V 5 10 15 20 25 30 35

-210 -110 100 110 102 310 104 -25 0 25 50 75 100˚C

Version 1.3 SFH 310 2016-01-04 5 Collector-Emitter Capacitance 1) page 9 CCE = f(V CE ), f = 1 MHz, E = 0 Power Consumption Ptot = f(T A) Directional Characteristics 1) page 9 Srel = f(ϕ) pF OHF04051 CEC CEV 10-3 10-2 10-1 100 101 102V

Version 1.3 SFH 310 Package Outline Dimensions in mm (inch). Package 3mm Radial (T 1), Epoxy Approximate Weight: 0.2 g Note Packing information is available on the internet (o nline product catalog). 0.4 (0.016) 0.6 (0.024) 3.1 (0.122) 3.4 (0.134) Area not flat 5.7 (0.224) 6.1 (0.240) ø2.7 (0.106) ø2.9 (0.114) 4.8 (0.189) 4.4 (0.173) 3.7 (0.146) 3.5 (0.138) 27.0 (1.063) 29.0 (1.142) spacing 2.54 (0.100) 0.8 (0.031) 0.4 (0.016) 0.4 (0.016) 0.7 (0.028) 0.4 (0.016) 0.6 (0.024) 1.2 (0.047) 1.8 (0.071) GEXY6710 0.9 (0.035) 1.1 (0.043) Collector

Version 1.3 SFH 310 2016-01-04 7 Recommended Solder Pad Dimensions in mm. Note: pad 1: emitter TTW Soldering IEC-61760-1 TTW 00 s OHA04645 100 150 200 250 300 t T 235 ˚C - 260 ˚C First wave 20 40 60 80 100 120 140 160 180 200 220 240 Second wave 10 s max., max. contact time 5 s per wave Preheating 100 ˚C 120 ˚C 130 ˚C Typical Cooling ca. 3.5 K/s typical ca. 2 K/s ca. 5 K/s Continuous line: typical process Dotted line: process limits < 150 K

Version 1.3 SFH 310 Disclaimer Language english will prevail in case of any discre pancies or deviations between the two language word ings. Attention please! The information describes the type of component and shall not be considered as assured characteristics . Terms of delivery and rights to change design reser ved. Due to technical requirements components may c ontain dangerous substances. For information on the types in question please con tact our Sales Organization. If printed or downloaded, please find the latest ve rsion in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport . For packing material that is returned to us unsorted or which w e are not obliged to accept, we shall have to invoi ce you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-suppo rt devices** or systems with the express written ap proval of OSRAM OS. *) A critical component is a component used in a li fe-support device or system whose failure can reaso nably be expected to cause the failure of that life-support device or system, or to affect its safety or the ef fectiveness of that device or system. **) Life support devices or systems are intended (a ) to be implanted in the human body, or (b) to supp ort and/or maintain and sustain human life. If they fail, it i s reasonable to assume that the health and the life of the user may be endangered.

Version 1.3 SFH 310 2016-01-04 9 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not nec essarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.

Version 1.3 SFH 310 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.