SFH302_01 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 Especially suitable for applications from 450 nm to 1100 nm  High linearity  TO-18, base plate, transparent exposy resin lens, with base connection  Available in groups

Applications

 Photointerrupters  Industrial electronics  For control and drive circuits

Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40… + 80 °C Löttemperatur bei Tauchlötung Lötstelle ≥ 2 mm vom Gehäuse, Lötzeit t ≤ 5 s Dip soldering temperature ≥ 2 mm distance from case bottom, soldering time t ≤ 5 s TS 260 °C Löttemperatur bei Kolbenlötung Lötstelle ≥ 2 mm vom Gehäuse, Lötzeit t ≤ 3 s Iron soldering temperature ≥ 2 mm distance from case bottom, soldering time t ≤ 3 s TS 300 °C Kollektor-Emitterspannung Collector-emitter voltage VCE 50 V Kollektorstrom Collector current IC 50 mA Kollektorspitzenstrom, τ < 10 µs Collector surge current ICS 200 mA Emitter-Basisspannung Emitter-base voltage VEB 7V Verlustleistung, TA = 25 °C Total power dissipation Ptot 150 mW W ärmewiderstand Thermal resistance RthJA 450 K/W

Kennwerte (TA = 25 °C, λ = 950 nm) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity λSm a x 880 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax λ 450 … 1100 nm Bestrahlungsempfindliche Fläche Radiant sensitive area A 0.675 mm 2 Abmessungen der Chipfläche Dimensions of chip area L × B L × W 1 × 1m m × mm Abstand Chipoberfläche zu Gehäuseoberfläche Distance chip front to case surface H 0.2… 0.8 mm Halbwinkel Half angle ϕ± 50 Grad deg. Fotostrom der Kollektor-Basis-Fotodiode Photocurrent of collector-base photodiode Ee = 0.5 mW/cm2, VCB = 5 V Ev = 1000 Ix, Normlicht/standard light A, VCB = 5 V IPCB IPCB 4.2 12.5 µA µA Kapazität Capacitance VCE = 0 V, f = 1 MHz, E =0 VCB = 0 V, f = 1 MHz, E =0 VEB = 0 V, f = 1 MHz, E =0 C CE C CB C EB pF pF pF Dunkelstrom Dark current VCE = 10 V, E =0 ICEO 20 (≤ 200) nA

Die Fototransistoren werden nach ihrer Fotoempfindlichkeit gruppiert und mit arabischen Ziffern gekennzeichnet. The phototransistors are grouped according to their spectral sensitivity and distinguished by arabian figures. Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit -2 -3 -4 -5 -6 Fotostrom, λ = 950 nm Photocurrent Ee = 0.5 mW/cm2, VCE = 5 V Ev = 1000 Ix, Normlicht/standard light A VCE = 5 V IPCE IPCE 0.4… 0.8 1.75 0.63… 1.25 2.8 1 … 2 4.5 1.6… 3.2 7.1 ≥ 2.5 9.5 mA mA Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 kΩ tr, tf 91 1 1 4 1 7 2 0 µs Kollektor-Emitter- Sättigungsspannung Collector-emitter saturation voltage IC = IPCEmin 1) × 0.3, Ee = 0.5 mW/cm2 VCEsat 200 200 200 200 200 mV Stromverstärkung Current gain Ee = 0.5 mW/cm2, VCE = 5 V 140 230 360 570 750 – 1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe. 1) IPCEmin is the min. photocurrent of the specified group. IPCE IPCB

Relative Spectral Sensitivity Srel = f (λ) Output Characteristics IC = f (VCE ), IB = Parameter Photocurrent IPCE = f (Ee), VCE = 5 V Directional Characteristics Srel = f (ϕ) Total Power Dissipation Ptot = f (TA)

Maßzeichnung Package Outlines Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 3.6 (0.142) 3.0 (0.118) ø4.3 (0.169) ø4.1 (0.161) GETY6017 1.1 (0.043) 0.9 (0.035) 0.9 (0.035) 1.1 (0.043) ø5.2 (0.205) ø5.5 (0.217) 2.54 (0.100) spacing E C B ø0.45 (0.018) (2.7 (0.106)) Chip position sensitive area Radiant 14.5 (0.571) 12.5 (0.492)