SFH3010 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 Very small SMT package (SCD 80): (LxWxH) 1.7 mm x 0.8 mm x 0.65 mm  Especially suitable for applications from 420 nm to 1100 nm  large viewing angle ±80°  suitable for IR reflow soldering (JEDEC level 4)  Available only on tape and reel

Applications

 Miniature photointerrupters  Sensor technology (eg mobile phone)  For control and drive circuits

Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40… + 100 °C Kollektor-Emitterspannung Collector-emitter voltage VCE VCE (t<2m i n ) V Kollektorstrom Collector current IC 15 mA Kollektorspitzenstrom, τ < 10 µs Collector surge current ICS 75 mA Emitter-Kollektorspannung Emitter-collector voltage VEC 7V Verlustleistung, TA = 25 °C Total power dissipation Ptot 130 mW Wärmewiderstand Sperrschicht - Umgebung bei Montage auf FR4 Platine, Padgröße je 16 mm2 Thermal resistance junction - ambient mounted on PC-board (FR4), padsize 16 mm 2 each RthJA 585 K/W

Kennwerte (TA = 25 °C, λ = 950 nm) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity λSm a x 860 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax λ 420 … 1100 nm Bestrahlungsempfindliche Fläche Radiant sensitive area A 0.02 mm 2 Abmessungen der Chipfläche Dimensions of chip area L × B L × W 0.38× 0.38 mm × mm Halbwinkel Half angle ϕ± 80 Grad deg. Kapazität Capacitance VCE = 5 V, f = 1 MHz, E =0 C CE 1.3 pF Dunkelstrom Dark current VCE = 20 V, E =0 ICEO 2 (≤50)n A Fotostrom Photocurrent Ee = 0.5 mW/cm2,VCE = 5 V IPCE >25 µA Anstiegszeit/Abfallzeit Rise and fall time IC = 1 mA, VCC = 5 V, RL = 1 kΩ tr,tf 7 µs Kollektrr-Emitter-Sättigungsspannung Collector-emitter saturation voltage IC = 10µA Ee = 0.5 mW/cm2, λ = 950 nm VCEsat 140 mV

Directional Characteristics Srel = f (ϕ) OHF00614 100˚ 90˚ 80˚ 70˚ 60˚ 50˚ 0.2 0.4 0.6 0.8 1.0ϕ

Rel. Spectral Sensitivity, Srel = f (λ), axial direction Photocurrent IPCE = f (TA), VCE = 5 V, normalized to 25 °C Photocurrent IPCE = f (VCE ), Ee = Parameter OHF00593 λ relS 400 500 600 700 800 900 nm 1100 100 T OHF01524 A -25 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 25 50 75 100 ΙPCE PCEΙ 25 C OHF00612 IPCE CEV 100 150 200 250 300 350 µA 450 10 15 20 25 30V5 1 mW/cm 2 0.5 mW/cm 2 0.25 mW/cm 2 0.1 mW/cm 2 Dark Current ICEO = f (VCE ), E = (0) Collector-Emitter Capacitance C CE = f (VCE ), f = 1 MHz Dark Current OHF00383 CEOΙ 010 CEV 10-1 100 101 nA 10 20 30V OHF00592 V CEC pF -210 -110 10 0 101 102 0.5 1.0 1.5 2.0 2.5 3.0 VCE ICEO = f (TA), VCE = 20 V, E = (0) Total Power Dissipation Ptot = f (TA) T OHF00380 A CEOΙ -110 10 0 10 1 10 2 10 3 nA 20 40 60 80 100˚C T OHF00613 A totP 0 20 40 60 80 C 100 mW 100 120 140

Maßzeichnung Package Outlines Ma ße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. Package Epoxy, SmartLED (SCD 80) Colour colourless, light diffused Package marking Collector GPLY6089 Package 0.3 (0.012) +0.05 (0.002) 7˚ max +0.02 (0.001) marking marking Package