SFH205F OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

 Especially suitable for applications of 950 nm  Short switching time (typ. 20 ns)  5 mm LED plastic package  Also available on tape and reel

Applications

 IR-remote control of hi-fi and TV sets, video tape recorders, dimmers, remote control of various equipment  Photointerrupters

Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg – 40 … + 100 °C Sperrspannung Reverse voltage VR 32 V Verlustleistung, TA = 25 °C Total power dissipation Ptot 150 mW Kennwerte (TA = 25 °C, λ = 950 nm) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Fotostrom Photocurrent VR = 5 V, Ee = 1 mW/cm2 IP 60 (≥ 45) μA Wellenlänge der max. Fotoempfindlichkeit Wavelength of max. sensitivity λS max 950 nm Spektraler Bereich der Fotoempfindlichkeit S = 10% von Smax Spectral range of sensitivity S = 10% of Smax λ 800 … 1100 nm Bestrahlungsempfindliche Fläche Radiant sensitive area A 7.00 mm2 Abmessungen der bestrahlungsempfindlichen Fläche Dimensions of radiant sensitive area L × B L × W 2.65 × 2.65 mm × mm Halbwinkel Half angle ϕ ± 60 Grad deg. Dunkelstrom, VR = 10 V Dark current IR 2 (≤ 30) nA Spektrale Fotoempfindlichkeit Spectral sensitivity Sλ 0.59 A/W Quantenausbeute Quantum yield η 0.77 Electrons Photon Leerlaufspannung, Ee = 0.5 mW/cm2 Open-circuit voltage VO 330 (≥ 250) mV

Kurzschlußstrom, Ee = 0.5 mW/cm2 Short-circuit current ISC 28 μA Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 50 Ω; VR = 5 V; λ = 850 nm; Ip = 800 μA tr, tf 20 ns Durchlaßspannung, IF = 100 mA, E = 0 Forward voltage VF 1.3 V Kapazität, VR = 0 V, f = 1 MHz, E = 0 Capacitance C0 72 pF Temperaturkoeffizient von VO Temperature coefficient of VO TCV – 2.6 mV/K Temperaturkoeffizient von ISC Temperature coefficient of ISC TCI 0.18 %/K Rauschäquivalente Strahlungsleistung Noise equivalent power VR = 10 V NEP 4.3 × 10– 14 Nachweisgrenze, VR = 10 V Detection limit D* 6.2 × 1012 Kennwerte (TA = 25 °C, λ = 950 nm) Characteristics (cont’d) Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit W Hz cm Hz×

Relative Spectral Sensitivity Srel = f (λ) Dark Current IR = f (VR), E = 0 Directional Characteristics Srel = f (ϕ) OHF00080 Ι R RV 0 5 10 15 V 20 1000 2000 3000 4000 pA OHF01402 40 30 20 10 20 40 60 80 100 1200.40.60.81.0 ϕ 0.2 0.4 0.6 0.8 1.0 100 Photocurrent IP = f (Ee), VR = 5 V Open-Circuit Voltage VO = f (Ee) Capacitance C = f (VR), f = 1 MHz, E = 0 E OHF01097 e 010 PΙ 10 1 10 2 10 410 -1 10 0 10 1 10 2 410 310 210 110 10 0 VO μ Am V Ι P VO 310 μW/cm 2 V OHF00081 R -210 C 0 -110 010 110 210V pF 100 Total Power Dissipation Ptot = f (TA) Dark Current IR = f (TA), VR = 10 V, E = 0 T OHF00394 A totP 0 20 40 60 80 ˚C 100 mW 100 120 140 160 T OHF00082 A -110 0 RΙ 10 0 10 1 10 2 10 3 nA 20 40 60 80 ˚C 100

Maßzeichnung Package Outlines Maße in mm (inch) / Dimensions in mm (inch). Lötbedingungen Soldering Conditions Wellenlöten (TTW) (nach CECC 00802) TTW Soldering (acc. to CECC 00802 6.9 (0.272) 6.3 (0.248) 4.0 (0.157) 34 (1.339) 32 (1.260) 1.8 (0.071) 1.2 (0.047) 0.8 (0.031) 0.4 (0.016) 2.54 (0.100) spacing 4.1 (0.161) 3.7 (0.146) 5.1 (0.201) 4.7 (0.185) Cathode Area not flat Radiant sensitive area GEOY6651 0.4 (0.016) 0.6 (0.024) 0.5 (0.020) 0.3 (0.012) OHLY0598 50 100 150 200 250 100 150 200 250 300 T t C s 235 C 10 s C... 260 1. Welle 1. wave 2. Welle 2. wave

5 K/s 2 K/sca 200 K/s

CC... 130100

2 K/s

Zwangskühlung forced cooling Normalkurve standard curve Grenzkurven limit curves

OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com © All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserv ed. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of tr ansport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or system s must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.