SFH203 OSRAM

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

Version 1.3 SFH 203

Ordering Information

Features: Wavelength range (S10%) 400 nm to 1100 nm

  • Short switching time (typ. 5 ns)
  • 5 mm LED plastic package

Applications

  • Industrial electronics
  • For control and drive circuits Type: Photocurrent Ordering Code IP [µA] VR = 5 V, Std. Light A, E V = 1000 lx SFH 203 80 (≥ 50) Q62702P0955

Version 1.3 SFH 203 Maximum Ratings (TA = 25 °C) Characteristics (TA = 25 °C) Parameter Symbol Values Unit Operating and storage temperature range T op ; T stg -40 ... 100 °C Reverse voltage VR 20 V Reverse voltage (t < 2 min) VR 50 V Total Power dissipation P tot 150 mW ESD withstand voltage (acc. to ANSI/ ESDA/ JEDEC JS-001 - HBM) VESD 2000 V Parameter Symbol Values Unit Photocurrent (Ev = 1000 lx, Std. Light A, V R = 5 V) (typ (min)) I P 80 (≥ 50) µA Wavelength of max. sensitivity (typ) λ S max 850 nm Spectral range of sensitivity (typ) λ 10% (typ) 400 ... 1100 nm Radiant sensitive area (typ) A 1.00 mm 2 Dimensions of radiant sensitive area (typ) L x W 1 x 1 mm x mm Half angle (typ) ϕ ± 20 ° Dark current (VR = 20 V) (typ (max)) I R 1 (≤ 5) nA Spectral sensitivity of the chip (typ) S λ typ 0.62 A / W Quantum yield of the chip (λ = 850 nm) (typ) η 0.90 Electro ns /Photon Open-circuit voltage (Ev = 1000 lx, Std. Light A) (typ (min)) V O 420 (≥ 350) mV Short-circuit current (Ev = 1000 lx, Std. Light A) (typ) I SC 80 µA Rise and fall time (VR = 20 V, R L = 50 Ω, λ = 850 nm) (typ) t r, t f 0.005 µs Forward voltage (IF = 100 mA, E = 0) (typ) V F 1.3 V Capacitance (VR = 0 V, f = 1 MHz, E = 0) (typ) C 0 11 pF Temperature coefficient of V O (typ) TC V -2.6 mV / K

Version 1.3 SFH 203 2015-12-23 3 Temperature coefficient of I SC (Std. Light A) (typ) TC I 0.18 % / K Noise equivalent power (VR = 20 V, ) (typ) NEP 0.029 pW / Hz ½ Detection limit (typ) D * 3.5e12 cm x Hz ½ / W Relative Spectral Sensitivity 1) page 8 Srel = f(λ) Photocurrent / Open-Circuit Voltage 1) page 8 IP (V R = 5 V) / V O = f(E V) Parameter Symbol Values Unit λ OHF01034 relS 400 600 800 1000 1200 100 nm

Version 1.3 SFH 203 Power Consumption Ptot = f(T A) Dark Current 1) page 8 IR = f(V R), E = 0 Capacitance 1) page 8 C = f(V R), f = 1 MHz, E = 0 Dark Current 1) page 8 IR = f(T A), VR = 20 V, E = 0 T OHF00394 A totP 0 20 40 60 80 ˚C 100 mW 100 120 140 160

Version 1.3 SFH 203 2015-12-23 5 Package Outline Dimensions in mm. Package 5mm Radial (T 1 ¾), Epoxy Approximate Weight: 0.3 g Note Packing information is available on the internet (o nline product catalog).

Version 1.3 SFH 203 Recommended Solder Pad Dimensions in mm. Note: pad 1: anode TTW Soldering IEC-61760-1 TTW 00 s OHA04645 100 150 200 250 300 t T 235 ˚C - 260 ˚C First wave 20 40 60 80 100 120 140 160 180 200 220 240 Second wave 10 s max., max. contact time 5 s per wave Preheating 100 ˚C 120 ˚C 130 ˚C Typical Cooling ca. 3.5 K/s typical ca. 2 K/s ca. 5 K/s Continuous line: typical process Dotted line: process limits < 150 K

Version 1.3 SFH 203 2015-12-23 7 Disclaimer Language english will prevail in case of any discre pancies or deviations between the two language word ings. Attention please! The information describes the type of component and shall not be considered as assured characteristics . Terms of delivery and rights to change design reser ved. Due to technical requirements components may c ontain dangerous substances. For information on the types in question please con tact our Sales Organization. If printed or downloaded, please find the latest ve rsion in the Internet. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport . For packing material that is returned to us unsorted or which w e are not obliged to accept, we shall have to invoi ce you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-suppo rt devices** or systems with the express written ap proval of OSRAM OS. *) A critical component is a component used in a li fe-support device or system whose failure can reaso nably be expected to cause the failure of that life-support device or system, or to affect its safety or the ef fectiveness of that device or system. **) Life support devices or systems are intended (a ) to be implanted in the human body, or (b) to supp ort and/or maintain and sustain human life. If they fail, it i s reasonable to assume that the health and the life of the user may be endangered.

Version 1.3 SFH 203 Glossary 1) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not nec essarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice.

Version 1.3 SFH 203 Published by OSRAM Opto Semiconductors GmbH Leibnizstraße 4, D-93055 Regensburg www.osram-os.com © All Rights Reserved.