SE5166

SE5166 ETC1

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

Typical Low Dropout Voltage of 203mV at 75mA. Guaranteed 150mA output over the full operating temperature range. Excellent Line and Load Regulation. High Accuracy Output Voltage of 2%. Typical Low Ground Current at 1mA Current Limiting and Thermal Protection. Standard SOT-23-3L, TO-92, and SOT-323-3L Package.

Applications

Cellphones. Wireless LAN’s. Hand-Held Instrumentation. Portable Video Game Devices. Digital Cameras. Ordering/Marking Information Package

Ordering Information

3.3V SE5166AHN SE5166AHN YYWW 2.8V SE5166BHN SE5166BHN YYWW 2.5V SE5166CHN SE5166CHN YYWW 1.8V SE5166DHN SE5166DHN YYWW 1.5V SE5166EHN SE5166EHN YYWW 3.0V SE5166FHN SE5166FHN YYWW 3.3V SE5166AHG SE5166AHG YYWW 2.8V SE5166BHG SE5166BHG YYWW 2.5V SE5166CHG SE5166CHG YYWW 1.8V SE5166DHG SE5166DHG YYWW 1.5V SE5166EHG SE5166EHG YYWW 3.0V SE5166FHG SE5166FHG YYWW YY: year code WW: week code.

Preliminary and all contents are subject to change without prior notice. © Seaward Electronics, Inc., 2004. • www.seawardinc.com • Page 2 SEAWARD ELECTRONICS 150mA CMOS LDO Regulator (Preliminary) SE5166 Ordering/Marking Information (Continued) Package 3.3V SE5166ALN 166AN_ 2.8V SE5166BLN 166BN_ 2.5V SE5166CLN 166CN_ 1.8V SE5166DLN 166DN_ 1.5V SE5166ELN 166EN_ 3.0V SE5166FLN 166FN_ 3.3V SE5166ALG 166AG_ 2.8V SE5166BLG 166BG_ 2.5V SE5166CLG 166CG_ 1.8V SE5166DLG 166DG_ 1.5V SE5166ELG 166EG_ 3.0V SE5166FLG 166FG_ 3.3V SE5166APN 166AN_ 2.8V SE5166BPN 166BN_ 2.5V SE5166CPN 166CN_ 1.8V SE5166DPN 166DN_ 1.5V SE5166EPN 166EN_ 3.0V SE5166FPN 166FN_ 3.3V SE5166APG 166AG_ 2.8V SE5166BPG 166BG_ 2.5V SE5166CPG 166CG_ 1.8V SE5166DPG 166DG_ 1.5V SE5166EPG 166EG_ 3.0V SE5166FPG 166FG_ Starting with 1, a bar on top of 1 is for production year 2001, and underlined 1 is for year 2002. The next character is marked on top for 2003, and underlined for 2004. The naming pattern continues with consecutive characters for later years. The last character is the week code. (A-Z: 1-26, a-z: 27-52)

Preliminary and all contents are subject to change without prior notice. © Seaward Electronics, Inc., 2004. • www.seawardinc.com • Page 3 SEAWARD ELECTRONICS 150mA CMOS LDO Regulator (Preliminary) SE5166

Electrical Characteristics

VIN = 5V; CIN = 2.2µF; COUT = 2.2µF; IOUT = 10mA; TJ = 25°C; unless otherwise noted Symbol Parameter Conditions Min Typ Max Unit VOUT Output Voltage Accuracy SE5166 – 1.5V SE5166 – 1.8V SE5166 – 2.5V SE5166 – 2.8V SE5166 – 3.0V SE5166 – 3.3V 1.470 1.764 2.450 2.744 2.940 3.234 1.5 1.8 2.5 2.8 3.0 3.3 1.530 1.836 2.550 2.856 3.060 3.366 V V V V V ∆VOUT Line Regulation VIN = VOUT + 1V to 5.5V, IOUT = 10mA ∆VOUT Load Regulation (5) VIN = 5V; IOUT = 10mA to 150mA ∆VOUT/∆T Output Voltage Temperature Coefficient Note 4 0.79 mV/°C IOUT = 10mA IOUT = 75mA 203 VIN – VOUT Dropout Voltage (6) IOUT = 150mA 500 mV Thermal Protection Temperature 150 TPROTECTION Thermal Protection Protection Hysterisys PSRR Ripple Rejection f = 120 Hz dB IQ Quiescent Current IOUT = 10mA mA ILIMIT Current Limit 300 mA Absolute Maximum Ratings(1) Power Dissipation (PD) ……….. Internally Limited (3) Storage Temperature (TS) ……….. -40°C to +150°C Operating Ratings(2) Junction Temperature (TJ) …….….. 0°C to +125°C Package Thermal Resistance 160°C/W (TO-92) 230°C/W (SOT-23-3L) 250°C/W (SOT-323-3L)

Preliminary and all contents are subject to change without prior notice. © Seaward Electronics, Inc., 2004. • www.seawardinc.com • Page 4 SEAWARD ELECTRONICS 150mA CMOS LDO Regulator (Preliminary) SE5166 Note 1: Exceeding the absolute maximum rating may damage the device. Note 2: The device is not guaranteed to function outside its operating rating. Note 3: The maximum allowable power dissipation at any TA (ambient temperature) is calculated using: PD(MAX) = (TJ(MAX) – TA)/ΘJA. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. See “Thermal Consideration” section for details Note 4: Output voltage temperature coefficient is the worst case voltage change divided by the total temperature range. Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range from 0.1mA to 150mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification. Note 6: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Typical Application

Preliminary and all contents are subject to change without prior notice. © Seaward Electronics, Inc., 2004. • www.seawardinc.com • Page 5 SEAWARD ELECTRONICS 150mA CMOS LDO Regulator (Preliminary) SE5166 Application Hints Like any low dropout regulator, SE5166 requires external capacitors to ensure stability. The external capacitors must be carefully selected to ensure performance. Thermal Considerations It is important that the thermal limit of the package is not exceeded. The SE5166 has built-in thermal protection. When the thermal limit is exceeded, the IC will enter protection, and VOUT will be pulled to ground. The power dissipation for a given application can be calculated as following: The power dissipation (PD) is PD = IOUT * [VIN – VOUT] The thermal limit of the package is then limited to PD(MAX) = [TJ – TA]/ΘJA where TJ is the junction temperature, TA is the ambient temperature, and ΘJA is around 250°C/W for SE5166. SE5166 is designed to enter thermal protection at 150°C. For example, if TA is 25°C then the maximum PD is limited to about 0.5W. In other words, if IOUT(MAX) = 150mA, then [VIN – VOUT] cannot exceed 3.33V. Input Capacitor An input capacitor of at least 2.2µF is required. Ceramic or Tantalum can be used. The value can be increase without upper limit. Output Capacitor An output capacitor is required for stability. It must be placed no more than 1 cm away from the VOUT pin, and connected directly between VOUT and GND pins. The minimum value is 2.2µF but may be increase without limit.

Preliminary and all contents are subject to change without prior notice. © Seaward Electronics, Inc., 2004. • www.seawardinc.com • Page 6 SEAWARD ELECTRONICS 150mA CMOS LDO Regulator (Preliminary) SE5166 OUTLINE DRAWING SOT-23-3L (SC-59) OUTLINE DRAWING TO-92 B C A D E F J G H K L MIN MAX MIN MAX A 0.110 0.120 2.80 3.04 B 0.047 0.055 1.20 1.40 C 0.083 0.104 2.10 2.64 D 0.035 0.040 0.89 1.03 E 0.070 0.080 1.78 2.05 F 0.018 0.024 0.45 0.60 G 0.015 0.020 0.37 0.51 H 0.0005 0.004 0.013 0.10 J 0.034 0.040 0.887 1.02 K 0.003 0.007 0.085 0.18 L 0.027 0.69 DIMN INCHES MM DIMENSIONS A B D E G F H K J MIN MAX MIN MAX A 0.175 0.205 4.445 5.207 B 0.170 0.210 4.318 5.334 E 0.500 0.610 12.70 15.50 F 0.016 0.021 0.407 0.533 G 0.045 0.055 1.143 1.397 H 0.095 0.105 2.413 2.667 J 0.080 0.105 2.032 2.667 K 0.125 0.165 3.175 4.191 DIMN INCHES MM DIMENSIONS

Preliminary and all contents are subject to change without prior notice. © Seaward Electronics, Inc., 2004. • www.seawardinc.com • Page 7 SEAWARD ELECTRONICS 150mA CMOS LDO Regulator (Preliminary) SE5166 OUTLINE DRAWING SOT-323-3L Customer Support Seaward Electronics Incorporated – China Rm 1605, Building 1, International Pioneering Park, #1 Shangdi Xinxi Rd Haidian District, Beijing 100085, China Tel: 86-10-8289-5700/01/05 Fax: 86-10-8289-5706 Seaward Electronics Corporation – Taiwan 2F, #181, Sec. 3, Minquan East Rd, Taipei, Taiwan R.O.C Tel: 886-2-2712-0307 Fax: 886-2-2712-0191 Seaward Electronics Incorporated – North America 49 Showers Dr. J126 Mountain View, CA 94040, USA Tel: 1-408-821-6600 Last Updated - 3/9/2005