SDP5024G LEIDITECH

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

DESCRIPTION: The integrated thyristor series provide overvoltage protection for applications such as VDSL2, ADSL2, and ADSL2+ with minimal effect on data signals. This silicon design innovation results in a capacitive loading characteristic that is compatible with these high bandwidth applications. The devices is also bi-directional between pin1 to pin3. All electrical parameters and surge ratings apply to forward and reverse polarities. This surface mount SOT23-6 package provides a surge capability that exceeds most worldwide standards and recommendations for lightning surge withstand capability of tertiary protectors. FEATURES:  Compatible with VDSL2 、ADSL2  Low capacitance and leakage current  Balanced overvoltage protection  Low clamping voltage  Response time under 500ns  Low insertion loss  Low distortion PROTECTION SOLUTION TO MEET  IEC61000-4-2 (ESD)±15kV (air), ±8kV (contact)  IEC61000-4-4 (EFT)40A(5/50ns)  IEC61000-4-5 (Lightning) 35A (8/20µs) MECHANICAL CHARACTERISTICS  JEDEC SOT23-6 package  Molding compound flammability rating: UL 94V-0  Quantity per reel: 3, 000pcs  Lead finish: lead free  Marking code: J24G SOT23‐6 Schematic & PIN Configuration Integrated Thyristor Surge Protector SDP5024G Rev : www.leiditech.com 01.06.2018 1/5

(between pin1 and pin3, T A =25℃, RH=45%-75%, unless otherwise noted) Parameter Symbol Value Unit Non-repetitive impulse current on 8/20 μs waveform I PP 35 A ESD per IEC 61000-4-2 (Air) ESD per IEC 61000-4-2 (Contact) V ESD +/- 15 +/- 8 kV Lead soldering temperature T L 260 (10 sec.) ℃ Operating junction temperature range T J -40 to +150 ℃ Storage temperature range T STG -65 to +150 ℃

ELECTRICAL CHARACTERISTICS

(between pin1 and pin3, T A =25℃) Parameter Symbol Conditions Min Typ Max Unit Stand-off voltage V DRM I DRM =100nA 24 V Off-state current I DRM V DRM = 24V 100 nA Switching voltage V S 100KV/s 30 V Switching current I S 10 mA Holding current I H 40 mA On-state voltage V T I T =1A 1.5 V Clamping voltage V C I PP =35A, tp =8/20μs 32 35 V Off-state capacitance C O F=1MHz, 2V 1.1 3.0 pF Delta Co ∆C O Line bias=1V to V DRM 0.5 pF

ORDERING INFORMATION

Type SIDACtor DSL ProtectorType SIDACtor DSL Protector Rev : www.leiditech.com 01.06.2018 2/5

RATINGS AND V‐I CHARACTERISTICS CURVES A =25℃, unless otherwise noted) FIG.1:V- I curve characteristics (Bi-directional) Voltage(V) FIG.2: Typical capacitance against line voltage (without external bias) Capacitance(pF) 0 2 4 6 8 10 12 14 16 18 20 22 24 0.0 0.5 1.0 1.5 2.0 2.5 -V +V I T I DRM V T V DRM V S I S I H V B FIG.3: Normalized V S change vs.junction temperature percent of V S change (%) 0.96 0.98 -50 -25 0 25 50 75 100 125 150 1.08 1.00 1.02 1.04 Tj( 1.06 FIG.4: Normalized holding current vs. case temperature Normal I H 0.6 0.7 -50 -25 0 25 50 75 100 125 150 1.2 0.8 0.9 1.0 Tc( 1.1 SDP5024G Rev : www.leiditech.com 01.06.2018 3/5

M P O R Recommended solder pad layout Symbol Millimeters Inches Min Max Min Max A 1.05 1.25 0.041 0.049 A1 0.00 0.10 0.000 0.004 A2 1.05 1.15 0.041 0.045 b 0.30 0.50 0.012 0.020 c 0.10 0.20 0.004 0.008 D 2.85 3.05 0.112 0.120 E 1.50 1.70 0.059 0.067 E1 2.65 2.95 0.104 0.116 e 0.95(BSC) 0.037(BSC) e1 1.80 2.00 0.071 0.079 L 0.30 0.60 0.012 0.024 Ɵ 0° 8° 0° 8° M - 2.59 - 0.102 O - 0.69 - 0.027 P - 0.99 - 0.039 R - 0.95 - 0.038 SDP5024G Rev : www.leiditech.com 01.06.2018 4/5

TAPE AND REEL SPECIFICATION‐SOT23‐6 3,000 7 inch reel pack Symbol Millimeter Inches Typ. Typ. a 3.17 0.125 B 3.23 0.127 C 1.37 0.054 d Φ1.55 Φ0.061 E 1.75 0.069 F 3.50 0.138 P0 4.00 0.157 P 4.00 0.157 P1 2.00 0.079 W 8.00 0.315 D Φ180 Φ7.087 D1 60.00 2.632 D2 13.00 0.512 G R78.00 R3.071 H R25.60 R1.008 I R6.50 R0.256 W1 9.50 0.374 W2 13.10 0.516 Packaging Description: SOT23-6 parts are shipped in tape. The carrier tape is made from a dissipative(ca rbon filled) polycarbonate resin. The cover tape is a mu ltilayer film(heat activated adhesive in nature)primarily co mposed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000units per 7'' or 17.8cm di ameter reel. The reels are clear in color and made of polys tyrene plastic(anti-static coated SDP5024G Shanghai Leiditech Electronic Co.,Ltd Email: sale1@leiditech.com Tel : +86- 021 50828806 Fax : +86- 021 50477059 Rev : www.leiditech.com 01.06.2018 5/5