DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

WWW.LUNAINC.COM Precision – Control – Results Information in this technical data sheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 1/2 REV 01-04-16 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 DESCRIPTION FEATURES The SD012-UVC-011 is an AlGaN UVC photodiode with a 0.076 mm 2 active area, hermetically assembled in TO -46 package. Unlike most UV detectors it cuts off unwanted visible light from its detection spectrum (210-280nm), thereby eliminating the need for optical filter.

  • Schottky-Type Photodiode
  • Photovoltaic Mode Operation
  • Low Noise
  • High Speed
  • Visible Blindness RELIABILITY APPLICATIONS This Luna high-reliability device is in principle able to meet military test requirements (Mil -STD-750, Mil -STD-883) after p roper screening and group test. Contact Luna for recommendations on specific test conditions and procedures.
  • UVC Detection and Monitoring
  • Medical
  • Military ABSOLUTE MAXIMUM RATINGS SYMBOL MIN MAX UNITS Storage Temperature -40 to +125 °C - Operating Temperature -30 to +85 °C - Soldering Temperature - to +260 °C Ta = 23°C UNLESS NOTED OTHERWISE Forward Current - to 1.0 mA - Reverse Voltage - - 5.0 V -

WWW.LUNAINC.COM Precision – Control – Results Information in this technical data sheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Page 2/2 REV 01-04-16 © 2016 Luna Optoelectronics. All rights reserved. Luna Optoelectronics, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 OPTO-ELECTRICAL PARAMETERS Ta = 23°C UNLESS NOTED OTHERWISE PARAMETER TEST CONDITIONS MIN TYP MAX UNITS Dark Current VR = 0.1V - 0.1 100 pA Shunt Resistance VR = 10 mV 1.0 100 - GΩ Short Circuit Current UVI=1.0 - 20 - nA Spectral Application Range Spot Scan 210 - 280 nm Responsivity Peak l= 275 nm V, VR = 0 V - 0.06 - A/W Capacitance Vbias = 0V; f = 1 MHz - 10 - pF Noise Equivalent Power λ= 350 nm - 1.6 - 10- 17W/Hz0.5 TYPICAL PERFORMANCE SPECTRAL RESPONSE NOISE vs. BIAS UV-A PHOTOCURRENT UV-I PHOTOCURRENT