SCC-LE AVX
Document overview
- PDF pages: 8
Technical content
Page 1

The new series of cylindrical electrochemical double-layer capacitors offers excellent pulse power handling characteristics based on the combination of very high capacitance and very low ESR. Used by themselves or in conjunction with primary or secondary batteries, they provide extended back up time, longer battery life, and provide instantaneous power pulses as needed. Offers great solutions to Hold Up, Energy Harvesting, and Pulse Power Applications.
FEATURES
- Cap Values from 3.3F - 850F
- High pulse power capability
- Low ESR
- Low Leakage Current
HOW TO ORDER
SCC W
50 B
127
S
Capacitance Code
Series Diameter Case Length Voltage
Tolerance
1st two digits
SuperCap R = 8mm
Two digits
Code
P = +100%/-0%
represent significant
Cylindrical S = 10mm represent case B = 2.7V
S = +30%/-10%
figures 3rd digit
U = 16mm length in mm,
represents multiplier
V = 18mm 1K = 105mm
(number of zeros to
W = 22mm 1A = 115mm
follow)
N = 25mm X = 30mm Y = 35mm
QUALITY INSPECTION
TERMINATION
APPLICATIONS
- Power Holdup Modules
- Energy Harvesting
- UPS/Industrial
- Robotic Power
- High Pulse Current Applications
–
LE
S B
Lead Format Package Series Code
Custom Code
R = Radial
B = Bulk LE = Low ESR A1= 4mm Bent Leads\*
S = Solder Pin T = Tray\*\*
C1 = 2mm Bent Leads\*
L = Weldable Pin
\* Inquire about availability for Radial Leads only \*\*Inquire about availability
OPERATING
These SuperCapacitors are compatible with
Parts are tested for Life Cycle, high
TEMPERATURE
hand soldering, as well as reflow and wave
temperature load life, temperature
-40°C to +65°C @ 2.7V
soldering processes, so long as appropriate
characteristics, vibration resistance,

precautions are followed. See page 4 for
and humidity characteristics. See page 2 for more information.
more information.
Page 2
RATINGS & PART NUMBER REFERENCE
| AVX Part Number | Diameter (mm) | Length (mm) | Rated Capacitance (F) | Capacitance Tolerance | Rated Voltage (V) | Rated Temperature (°C) | DCL Max @ 72 Hrs (µA) | ESR Max @ 1000 Hz (mΩ) | ESR Max @ DC (mΩ) | Peak Current (A) | Power Density (W/kg) | Max Energy (Wh) | Energy Density (Wh/kg) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Radial Lead | |||||||||||||
| SCCR20B105PRBLE | 8 | 12 | 1 | +100%/-0% | 2.7/2.3* | 65/85* | 6 | 120 | 240 | 1.09 | 4339 | 0.0010 | 1.21 |
| SCCR20B335PRBLE | 8 | 20 | 3.3 | +100%/-0% | 2.7/2.3* | 65/85* | 12 | 45 | 65 | 3.67 | 10854 | 0.0033 | 2.69 |
| SCCS20B505PRBLE | 10 | 20 | 5 | +100%/-0% | 2.7/2.3* | 65/85* | 15 | 40 | 60 | 5.19 | 6910 | 0.0051 | 2.40 |
| SCCS30B106PRBLE | 10 | 30 | 10 | +100%/-0% | 2.7/2.3* | 65/85* | 30 | 25 | 50 | 9.00 | 4999 | 0.0101 | 2.89 |
| SCCU25B256SRBLE | 16 | 25 | 25 | +30%/-10% | 2.7/2.3* | 65/85* | 60 | 20 | 40 | 16.88 | 3025 | 0.0253 | 3.50 |
| SCCV40B506SRBLE | 18 | 40 | 50 | +30%/-10% | 2.7/2.3* | 65/85* | 75 | 15 | 30 | 27.00 | 2303 | 0.0506 | 4.00 |
| Solder Pin Lead | |||||||||||||
| SCCW50B127SSBLE | 22 | 50 | 120 | +30%/-10% | 2.7/2.3* | 65/85* | 300 | 6 | 8 | 82.65 | 4050 | 0.1215 | 4.50 |
| SCCN50B187SSBLE | 25 | 50 | 180 | +30%/-10% | 2.7/2.3* | 65/85* | 600 | 7 | 10 | 86.79 | 2955 | 0.1823 | 6.16 |
| SCCX50B227SSBLE | 30 | 50 | 220 | +30%/-10% | 2.7/2.3* | 65/85* | 620 | 5 | 6 | 128.02 | 3038 | 0.2228 | 4.64 |
| SCCY68B407SSBLE | 35 | 68 | 400 | +30%/-10% | 2.7/2.3* | 65/85* | 1000 | 2.2 | 3 | 245.45 | 3352 | 0.4050 | 4.66 |
| Weldable Pin Lead | |||||||||||||
| SCCY71B407SLBLE | 35 | 71 | 400 | +30%/-10% | 2.7/2.3* | 65/85* | 1300 | 1.3 | 1.8 | 313.95 | 5461 | 0.4050 | 4.55 |
| SCCY73B407SLBLE | 35 | 73 | 400 | +30%/-10% | 2.7/2.3* | 65/85* | 1000 | 1.8 | 2.5 | 270.00 | 3845 | 0.4050 | 4.45 |
| SCCY83B507SLBLE | 35 | 83 | 500 | +30%/-10% | 2.7/2.3* | 65/85* | 1500 | 1 | 1.6 | 375.00 | 5110 | 0.5063 | 4.73 |
| SCCY83B607SLBLE | 35 | 83 | 600 | +30%/-10% | 2.7/2.3* | 65/85* | 1500 | 1 | 1.6 | 413.27 | 5110 | 0.6075 | 5.68 |
| SCCY85B607SLBLE | 35 | 85 | 600 | +30%/-10% | 2.7/2.3* | 65/85* | 1500 | 1.6 | 1.8 | 389.42 | 4459 | 0.6075 | 5.57 |
| SCCY1KB707SLBLE | 35 | 105 | 700 | +30%/-10% | 2.7/2.3* | 65/85* | 1900 | 0.9 | 1.45 | 468.98 | 4986 | 0.7088 | 5.86 |
| SCCY1AB857SLBLE | 35 | 115 | 850 | +30%/-10% | 2.7/2.3* | 65/85* | 2200 | 0.8 | 1.3 | 545.13 | 4547 | 0.8606 | 5.82 |
\*with appropriate voltage derating operating temperature can be extended to 85°C
QUALIFICATION TEST SUMMARY
| Test | Test Method | Parameter | Limits |
|---|---|---|---|
| Life Cycle | Capacitors are cycled between rated voltage and half-rated voltage under constant current at +25°C for 500,000 cycles | Capacitance Change ESR Appearance | ≤30% of initial spec value ≤2 times initial spec value No remarkable defects |
| High Temperature Load Life | Temperature: +65°C Voltage: Rated Voltage Test Duration: 2,000 hours | Capacitance Change ESR Appearance | ≤30% of initial spec value ≤2 times initial spec value No remarkable defects |
| Storage Temperature Characteristics | Storage Duration: 1 year No Load Temperature: +25°C | Capacitance Change ESR Appearance | ≤30% of initial spec value ≤2 times initial spec value No remarkable defects |
| Vibration Resistance | Amplitude: 1.5mm Frequency: 10 ~ 55Hz Direction: X, Y, Z for 2 hours each | Capacitance Change ESR Appearance | ≤30% of initial spec value ≤2 times initial spec value No remarkable defects |
| Humidity | Voltage: Rated Voltage RH: 90% Temperature: +60°C Test Duration: 1,500 hours | Capacitance Change ESR Appearance | ≤30% of initial spec value ≤2 times initial spec value No remarkable defects |
Page 3
QUALITY AND RELIABILITY
Capacitance vs. Temperature

200%
150%
100%
50%
-40°C
-20°C
0°C
20°C
40°C
60°C
80°C
Temperature (ºC)
Leakage Current vs. Temperature

-40°C
-20°C
0°C
20°C
40°C
60°C
80°C
Temperatue (ºC)
Equivalent Series Resistance vs. Temperature

250%
200%
150%
-40°C
-20°C
0°C
20°C
40°C
60°C
80°C
Temperature (°C)
Page 4
MECHANICAL SPECIFICATIONS
Solder Pin Type 2-pin 120F, 220F parts

| Cap (F) | D (mm) | L (mm) | P (mm) |
| 120 | 22 | 52 | 8.5 |
| 220 | 30 | 52 | 10.5 |
Solder Pin Type 2-pin 180F part

D (mm) L (mm) 25 50
Solder Pin Type 4-pin 400F part

D (mm) L (mm) 35 68
SOLDERING RECOMMENDATIONS
When soldering SuperCapacitors to a PCB, the temperature & time that the body of the SuperCapacitor sees during soldering can have a negative effect on performance. We advise following these guidelines:
- Do not immerse the SuperCapacitors in solder. Only the leads should come in contact with the solder.
- Ensure that the body of the SuperCapacitor is never in contact with the molten solder, the PCB or other components during soldering.
- Excessive temperatures or excessive temperature cycling during soldering may cause the safety vent to burst or the case to shrink or crack, potentially damaging the PCB or other components, and significantly reduce the life of the capacitor.
HAND SOLDERING
Keep distance between the SuperCapacitor body and the tip of the soldering iron and the tip should never touch the body of the capacitor. Contact between SuperCapacitor body and soldering iron will cause extensive damage to the SuperCapacitor, and change its electrical properties. It is recommended that the soldering iron temperature should be less than 350°C, and contact time should be
Radial Lead Type


Weldable Pin Type 2-pin 400F, 600F parts

D (mm) L (mm) 35 71 35 85
Radial Bent Lead Type

Style B (mm) A1 4 C1 2
limited to less than 4 seconds. Too much exposure to terminal heat during soldering can cause heat to transfer to the body of the SuperCapacitor, potentially damaging the electrical properties of the SuperCapacitor.
WAVE SOLDERING
Only use wave soldering on Radial type SuperCapacitors. The PCB should be preheated only from the bottom and for less than 60 seconds, with temperature at, or below, 100°C on the top side of the board for PCBs equal to or greater than 0.8 mm thick.
| Solder Temperature (ºC) | Suggested Solder Time (s) | Maximum Solder Time (s) |
|---|---|---|
| 220 | 7 | 9 |
| 240 | 7 | 9 |
| 250 | 5 | 7 |
| 260 | 3 | 5 |
REFLOW SOLDERING
Infrared or conveyor over reflow techniques can be used on these SuperCapacitors. Do not use a traditional reflow oven without clear rated reflow temperature for SuperCapacitors.
Page 5
TEST METHODS
IEC Capacitance Test Method
- Capacitance is measured using a Keithley 2400 or 2602 Meter
- Procedure
- Charge Capacitor to Rated Voltage at room temperature
- Disconnect parts from voltage to remove charging effects
- Discharge cells with a constant current I determined by 4 \* C \* VR
- Noting V1, t1, V2, t2 and performing the calculation for C

Voltage
I – Discharge Current [mA], 4 \* C \* VR VR – Rated Voltage V1 – Initial Test Voltage, 80% of VR V2 – Final Test Voltage, 40% of VR t1 – Initial Test time t2 – Final Test time C = I \* (t2 – t1) / (V1 – V2)
DCL Measurement @ 25°C
- DCL is measured using a Multimeter with high internal impedance across a resistor
- Charge Capacitor to Rated Voltage at room temperature for 72 Hours
- Disconnect parts from Voltage by opening switch 1 (Stabilize for 10 Min)
- Measure Voltage across a known Valued Resistor (1K Ohm)
- Calculate DCL = V/R

Initial ESR Measurement @ 25°C
- Using an Agilent 4263B LCR Meter and a Kelvin connection
- Measure at frequency of 1000 Hz
- Measurement Voltage of 10mV
DC ESR Measurement
- Six steps capacity and ESRDC Test Method is used as illustrated in the figure right.
- Tests are carried out by charging and discharging the capacitor for two cycles at rated voltage and half rated voltage
- C = (CDC1+CDC2) / 2
- ESRDC = (ESRDC1 + ESRDC2) / 2 Where: CDC1 = I2\*(t5-t4)/(V3-V4)
CDC2 = I2\*(t11-t10)/V9-V10) ESRDC1 = (V5-V4)/I2 ESRDC2 = (V11-V10)/I2 I1 = I2 = 75mA/F

Maximum Operating Current
- This is the maximum current when capacitor temperature rise of the capacitor during its operation is less than 15°C
Maximum Peak Current
- This is the maximum current in less than 1 sec
Watt Density
- Watt Density = (0.12\*V² / RDC) / mass
Energy Density
- Energy density = (½ CV²) / (3600\*mass)
Page 6
POLARITY / REVERSE VOLTAGE
In principal the positive and negative electrodes of the SuperCapacitors are symmetrical and in theory they should not have a polarity but for product consistency and for optimum performance the negative polarity is marked because the capacitors do not discharge completely when in use. It is recommended that
the polarity should be used as marked. If the polarity is reversed the circuit will not have a catastrophic failure but the circuit will see a much higher leakage current for a short duration of time and the life time of the SuperCapacitors will be reduced.
LIFE TIME AND TEMPERATURE PERFORMANCE
The life of a SuperCapacitor is impacted by a combination of operating voltage and the operating temperature according to the following equation: time to failure, t ∞ Vn \* exp (-Q / k\*T) …………..(1) where V is the voltage of operation, Q is the activation energy in electron volts (eV), k is the Boltzmann’s constant in eV and T is the operating temperature in °K (where K is in degrees Kelvin). Typical values for the voltage exponent, n, is between 2.5 - 3.5, and Q is between 1.0 - 1.2 eV in the normal operating temperature range of 40° to 65°C.
The industry standard for SuperCapacitor end of life is when the equivalent series resistance, ESR, increases to 200% of the original value and the capacitance drops by 30%. Typically a super-capacitance shows an initial change in the ESR value and then levels off. If the capacitors are exposed to excessive temperatures the ESR will show a continuous degradation. In the extreme case, if the temperatures or voltages are substantially higher, than the rated voltage, this will lead to cell leakage or gas leakage and the product will show a faster change in the ESR which may increase to many times the original value.
Expected Lifetime at Various Voltages SCC Series, 2.7V Rated

MTTF (years)
Expected Lifetime at Various Voltages SCC series, 2.3V Rated

MTTF (years)
Page 7
SAFETY RECOMMENDATIONS
Warnings
- To Avoid Short Circuit, after usage or test, SuperCapacitor voltage needs to discharge to ≤ 0.1V
- Do not Apply Overvoltage, Reverse Charge, Burn or Heat Higher than 150°C, explosion-proof valve may break open
- Do not Press, Damage or disassemble the SuperCapacitor, housing could heat to high temperature causing Burns
- If you observe Overheating or Burning Smell from the capacitor disconnect Power immediately, and do not touch
Emergency Applications
- If Housing is Leaking:
- Skin Contact: Use soap and water thoroughly to wash the area of the skin
- Eye Contact: Flush with flowing water or saline, and immediately seek medical treatment
- Ingestion: Immediately wash with water and seek medical treatment
Transportation
Not subjected to US DOT or IATA regulations UN3499, <10Wh, Non-Hazardous Goods International shipping description – “Electronic Products – Capacitor”
Licenced by CAP-XX
Regulatory
- UL 810A
- RoHS Compliant
- Reach Compliant / Halogen Free
Storage
- Capacitors may be stored within the operating temperature range of the capacitor
- Lower storage temperature is preferred as it extends the shelf life of the capacitor
- Do Not Store the SuperCapacitors in the following Environments
- High Temperature / High Humidity environments >70°C / 40% RH
- Direct Sunlight
- In direct contact with water, salt oil or other chemicals
- In direct contact with corrosive materials, acids, alkalis, or toxic gases
- Dusty environment
- In environment with shock and vibration conditions
Page 8




NORTH AMERICA
EUROPE
ASIA
Tel: +44 1276-697000
Tel: 864-967-2150
SOUTH AMERICA
Tel: +55 11-46881960
Contact:
Tel: +65 6286-7555
JAPAN
Tel: +81 740-321250

http://www.avx.com
