DATASHEET SEARCH SITE

Document overview

  • PDF pages: 4

Technical content

Page 1

NTC

PDF page 1 diagram

Interchangeable

Type SC Series

Thermometrics Thermistors

Features

  • Precision, solid state temperature sensor
  • Epoxy filled sleeve for controlled diameter
  • Interchangeability down to ±0.18°F (±0.10°C)
  • Suitable for use over the range of -40°F to 302°F (–40°C to 150°C
  • High sensitivity greater than –4%/°C at 77°F (25°C)
  • Most popular Resistance (R) vs Temperature (T) curves are availablee
  • Suitable for temperature measurement , control and compensation

Amphenol

Advanced Sensors

  • Ideal for medical applications
  • Fully insulated
  • Sleeved for good mechanical strength and resistance to solvents
  • 0.008 in (0.2 mm) diameter heavy isomid insulated bifilar copper lead wires for SC50
  • 0.004 in (0.1 mm) diameter heavy isomid insulated bifilar nickel lead wires for SC30

Page 2

Type SC30 Specifications

NTC Interchangeable Type SC30

Sleeved interchangeable chip thermistors with heavy isomid insulated nickel lead-wires.

Options

Consult Factory for Availability of Options

  • Other resistance values in the range of

1000 Ω to 100 kΩ

  • Other tolerances or ranges
  • Alternative lead wires or lengths
  • Non standard R vs T curves
  • Controlled dimensions

Thermal and Electrical Properties

Dissipation Constant

Still air:

0.4 mW/°C

Stirred oil:

3 mW/°C

Thermal Time Constant

Still air:

5 seconds

Stirred oil:

0.3 seconds

Maximum Power at 77°F (25°C)

~30 mW

De-rated from 100% at 77°F (25°C) to 0% at 212°F

(100°C)

PDF page 2 diagram

NTC Interchangeable Type SC30 dimensions

Ordering Information

Select appropriate part number below for resistance and temperature tolerance desired.

R 25°C Material System ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 158°F (0°C to 70°C)
2252 F SC30F232V SC30F232W
3000 F SC30F302V SC30F302W
5000 F SC30F502V SC30F502W
10000 F SC30F103V SC30F103W
10000 Y SC30Y103V SC30Y103W
30000 H SC30H303V SC30H303W
50000 G SC30G503V SC30Y503W
100000 Y SC30Y104V SC30Y104W
100000 G SC30G104V SC30G104W

Page 3

Type SC50 Specifications

NTC Interchangeable Type SC50

Sleeved interchangeable chip thermistors with heavy isomid insulated copper lead wires.

Options

Consult Factory for Availability of Options.

  • Other resistance values in the range of

1000 Ω to 100 kΩ

  • Other tolerances or ranges
  • Alternative lead wires or lengths
  • Non standard R vs T curves
  • Controlled dimensions

Thermal and Electrical Properties

Dissipation Constant

Still air:

0.5 mW/°C

Stirred oil:

0.4 mW/°C

Thermal Time Constant

Still air:

8 seconds

Stirred oil:

0.5 seconds

Maximum Power at 77°F (25°C)

~50 mW

De-rated from 100% at 77°F (25°C) to 0% at

212°F (100°C)

PDF page 3 diagram

NTC Interchangeable Type SC30 dimensions

Ordering Information

Select appropriate part number below for resistance and temperature tolerance desired.

R 25°C Material System ±0.18°F (±0.1°C) 32°F to 158°F (0°C to 70°C) ±0.36°F (±0.2°C) 32°F to 158°F (0°C to 70°C)
2252 F SC50F232V SC50F232W
3000 F SC50F302V SC50F302W
5000 F SC50F502V SC50F502W
10000 F SC50F103V SC50F103W
10000 Y SC50Y103V SC50Y103W
30000 H SC50H303V SC50H303W
50000 G SC50G503V SC50Y503W
100000 Y SC50Y104V SC50Y104W
100000 G SC50G104V SC50G104W

Page 4

Amphenol

www.amphenol-sensors.com

© 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice.

Advanced Sensors

Other company names and product names used in this document are the registered trademarks or

trademarks of their respective owners.

AAS-920-307C-03/2014