BL1040CT VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

SBL1040CT, SBLB1040CT www.vishay.com Vishay General Semiconductor Revision: 19-Sep-2018 1 Document Number: 88726 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Dual Common Cathode Schottky Rectifier DESIGN SUPPORT TOOLS

FEATURES

  • Power pack
  • Guardring for overvoltage protection
  • Low power loss, high efficiency
  • Low forward voltage drop
  • High forward surge capability
  • High frequency operation
  • Meets MSL level 1, per J-ST D-020, LF maximum peak of 245 °C (for D 2PAK (TO-263AB) package)
  • Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AB package)
  • AEC-Q101 qualified
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, and polarity protection application. MECHANICAL DATA Case: TO-220AB, D2PAK (TO-263AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-co mpliant, commercial grade Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: as marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 2 x 5 A VRRM 40 V IFSM 175 A VF 0.55 V TJ max. 125 °C Package TO-220AB, D 2PAK (TO-263AB) Circuit configuration Common cathode CASE PIN 2PIN 1 PIN 3 TO-220AB SBL1040CT SBLB1040CT PIN 1 K PIN 2 HEATSINK 3 1 K D2PAK (TO-263AB) click logo to get started Available Models MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL SBL1040CT UNIT Maximum repetitive peak reverse voltage V RRM 40 VWorking peak reverse voltage V RWM 28 Maximum DC blocking voltage V DC 40 Maximum average forward rectified current  at TC = 107 °C total device IF(AV) Aper diode 5.0 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 175 Operating junction and storage temperature range T J, TSTG -40 to +125 °C

SBL1040CT, SBLB1040CT www.vishay.com Vishay General Semiconductor Revision: 19-Sep-2018 2 Document Number: 88726 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width  40 ms Note (1) AEC-Q101 qualified, available in D2PAK (TO-263AB) package only ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS VALUE UNIT Maximum instantaneous forward voltage per diode V F (1) 5.0 A 0.55 V Maximum instantaneous reverse current at DC blocking voltage per diode I R (2) Rated VR TC = 25 °C 0.5 mA TC = 100 °C 50 THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL SBL SBLB UNIT Typical thermal resistance per diode R JC 3.0 3.0 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PAC KAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB SBL1040CT-E3/45 1.85 45 50/tube Tube TO-263AB SBLB1040CT-E3/45 1.35 45 50/tube Tube TO-263AB SBLB1040CT-E3/81 1.35 81 800/reel Tape and reel TO-263AB SBLB1040CTHE3_B/P (1) 1.35 P 50/tube Tube TO-263AB SBLB1040CTHE3_B/I (1) 1.35 I 800/reel Tape and reel

SBL1040CT, SBLB1040CT www.vishay.com Vishay General Semiconductor Revision: 19-Sep-2018 3 Document Number: 88726 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted) Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 4 - Typical Reverse Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode 0 50 100 150 2.5 7.5 12.5 Resistive or Inductive Load Average Forward Cu rrent (A) Case Temperature (°C) 1 10 100 100 150 200 250 300 TJ = TJ Max. 8.3 ms Single Half Sine-Wave Number of Cycles at 60 Hz Peak Forward Surge Current (A) 100 0.1 0.01 TJ = 125 °C TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle Instantaneous Forward Voltage (V) Instantaneous Forward Current (A) 0 20 40 60 80 100 0.001 0.01 0.1 100 TJ = 125 °C TJ = 25 °C TJ = 75 °C Percent of Rated Peak Reverse Voltage (%) Instantaneous Reverse Current (mA) 0.1 1 10 100 100 1000 10 000 TJ = 25 °C f = 1.0 MHz V sig = 50 mVp-p Reverse Voltage (V) Junction Capacitance (pF) 0.01 0.1 1 10 100 0.1 100 t - Pulse Duration (s) Transient Thermal Impedance (°C/W)

SBL1040CT, SBLB1040CT www.vishay.com Vishay General Semiconductor Revision: 19-Sep-2018 4 Document Number: 88726 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.113 (2.87) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) 0.415 (10.54) max. 0.635 (16.13) 0.625 (15.87)PIN 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 0.205 (5.20) 0.195 (4.95) 0.035 (0.90) 0.028 (0.70) 0.154 (3.91) 0.148 (3.74) 13 2 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.145 (3.68) 0.135 (3.43) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.560 (14.22) 0.530 (13.46) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.603 (15.32) 0.573 (14.55) D2PAK (TO-263AB) Mounting Pad Layout 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.08 (2.032) MIN. 0.15 (3.81) min. 0.33 (8.38) min. 0.42 (10.66) min. K K 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4.83) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15.85) 0.591 (15.00) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 (8.13) 0.411 (10.45) 0.380 (9.65) 0.245 (6.22) MIN.

www.vishay.com Vishay Revision: 01-Jan-2021 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gr anted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED