SBL40L15PT VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
  • PDF pages: 4

Technical content

Vishay General Semiconductor SBL40L15PT Document Number 88734 20-Mar-06 www.vishay.com PIN 1 PIN 3 CASE PIN 2 TO-247AD (TO-3P) Dual Common-Cathode Low VF OR-ing Schottky Rectifier

FEATURES

  • Guardring for overvoltage protection  Lower power losses, high efficiency  Very low forward voltage drop  High forward surge capability  High frequency operation  Solder Dip 260 °C, 40 seconds  Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power su pplies, OR-ing diode, freewheeling diodes, dc-to-dc converters and polarity protection application. MECHANICAL DATA Case: TO-247AD (TO-3P) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated (E3 Suffix) leads, solderable per J-STD-002B and JESD22-B102D Polarity: As marked Mounting Torque: 10 in-lbs maximum MAJOR RATINGS AND CHARACTERISTICS IF(AV) 20 A x 2 VRRM 15 V IFSM 340 A VF 0.33 V Tj max. 150 °C Note: (1) 2.0 µs pulse width, f = 1.0 kHz MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Maximum repetitive peak reverse voltage V RRM 15 V Maximum working peak reverse voltage V RWM 11 V Maximum DC blocking voltage V DC 15 V Maximum average forward rectified current at TC = 140 °C Total Device Per Leg IF(AV) 20 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM 340 A Peak repetitive reverse surge current (1) I RRM 2.0 A Voltage rate of change at (rated VR) dv/dt 10000 V/µs Operating junction storage temperature range T J, TSTG - 65 to + 150 °C

Figure 3. Typical Reverse Characteristics Per Leg Figure 4. Typical Junction Capacitance Per Leg Figure 5. Typical Transient Thermal Impedance Per Leg

0.078 REF

Document Number: 91000 www.vishay.com Revision: 11-Mar-11 1 Disclaimer Legal Disclaimer Notice Vishay ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in gene ric applications. Such statements are not binding statements about the suitability of products for a partic ular application. It is the customer’s responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. Parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product co uld result in person al injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.