SB007T03C SANYO

Document overview

  • PDF pages: 2

Technical content

Page 1

Ordering number :EN3617A

PDF page 1 diagram

Applications

Package Dimensions

  • Universal-use rectifier.

unit:mm

  • High frequency retification (switching regulators,

1147A

PDF page 1 diagram

converters, choppers).

Features

  • Low forward voltage (VF max=0.55V).
  • Fast reverse recovery time (trr max=10ns).
  • Low switching noise.
  • Low leakage current and high reliability due to highly reliable planar structure.
  • Series connection of 2 elements in a small-sized package facilitates high-density mounting and permits SB007T03C-applied equipment to be made smaller.

Specifications

Absolute Maximum Ratings at Ta = 25˚C (Value per element)

Parameter Symbol Conditions Ratings Unit
RepetitivePeakReverseVoltage VRRM 30 V
Non-repetitvePeakReverseSurgeVoltage VRSM 35 V
AverageOutputCurrent IO 70 mA
SuregeForwardCurrent IFSM 50Hzsinewave,1cycle 2 A
JunctionTemperature Tj –55to+125 ˚C
StorageTemperature Tstg –55to+125 ˚C

Electrical Characteristics at Ta = 25˚C (Value per element)

Parameter Symbol Conditions Ratings Unit
min typ max
ReverseVoltage VR IR=20µA 30 V
ForwardVoltage VF IF=70mA 0.55 V
ReverseCurrent IR VR=15V 5 µA
InterterminalCapacitance C VR=10V,f=1MHz 3.0 pF
ReverseRecoveryTime trr IF =I R=10mA,SeespecifiedTestCircuit 10 ns
ThermalResistance Rthj-a 620 ˚C/W
  • Marking:N trr Test Circuit

Electrical Connection

PDF page 1 diagram
PDF page 1 diagram

1:Anode 2:Cathode 3:Anode, Cathode

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

22898HA (KT)/D1096GI/N120MH (KOTO) 8-6773 No.3617-1/2

Page 2

SB007T03C

PDF page 2 diagram

No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use:

Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.

This catalog provides information as of February, 1998. Specifications and information herein are subject to change without notice.

PS No.3617-2/2