SAN-002T-0.8A

WC-260 ETC2

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Crimping tools and machines Crimping tools and machines The arrow mark indocates the press that is applicable to the applicator. MKS-SC Strip-crimp applicator for side feeding terminals MK-L Crimping applicator for end-feeding terminals MKS-L Crimping applicator for side-feeding terminals MKF-L Crimping applicator for end-feeding flag terminals MKS-LS Compact crimping applicator for side-feeding terminals Semi-automatic crimping machines (presses) contact a wire to a chain terminal each time a footswitch is pressed. Semi-automatic press AP-K2N

• Dimensions: (W×L×H)280×480×505mm
• Weight: Approx. 90kg(198lb)
• Power source: 100V AC, Single-phase 50/60Hz
• Pressure output: 14.7kN[1,500kg(3307lb)]
• Dies: Applicator replacement

JK-SP/SS2*YRS-370 – – – – – – KEJ-0.7 for plug, KEJ-0.4 for socket – J-SP/SS1*YRS-440 YC-440 – – – – J-BP/BS1* DEJ-0.3 – RA-SC1290 YRS-231–YRM-232–––RA-BC12 EJ-RA – YRM-233 RPJ-SP/SS2331YRS-331 – – – – – – EJ-RPJ – SAN-002T-0.8AYRS-220 – – – – – – EJ-PH – SAN-002T-0.8K SBH-001T-P0.5–YC-670R – – – WC-670 BBH-001T-P0.5 – – SBHM-001T-P0.5–YC-670R – – – – BBHM-001T-P0.5 EJ-BHMR – SBHS-002T-P0.5AYRS-852 – – – – – – EJ-BHS2 – SBHSM-002T-P0.5YRS-854 – – – – – – EJ-BHSW – SBHT-002T-P0.5 YRS-856 YRS-857 SBN-001T-1.0YRS-170 YC-170R – SCN-001T-1.0K YRS-191 YC-191R – – – WC-191 BCN-001T-1.0K SCN-001T-P1.0BCN-001T-P1.0 4 3 Hand tools Crimping tools Crimping tools Extraction tool Terminals and parts model number in alphabetical order Insertion tool Hand toolsHand tools for chain terminals for loose piece terminalsfor loose piece terminals Extraction and Insertion tools YRS series Insertion tool allows contacts be inserted in the housing. This tool greatly increases efficiency especially when thin wires are used. Extraction tool is used to extract contacts improperly inserted in the housing. Note: (1) These tools are for prototype tooling or repair. (2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies. Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the applicable wires described in this catalog may not be crimped properly. Before use, check for proper crimping (such as tensile strength, terminal/contact deformation). (3) These tools are not applicable to 2-wire crimping. (4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable. Dimensions: ×L) 59×224mm YC series Dimensions: (W×L) 70×296mm YRM series Dimensions: (W×L) 59×224mm YRF series Dimensions: (W×L) 70×295mm 80×305mm YRS series YC series YRM series YRF seriesWC & JUC series JUK's Hand Tools Terminal in loose form model No. Crimping tools It is the manual tool that is convenience to terminate very small quantity of contacts for prototype or maintenance. It is composed of two crimping dies for the conductor and insulation, and can be crimp easily. YRK and YRK-EX can be used for mass-production. YRK . YRK-EX series Note: Contact JST for wire range. YRK series Dimensions: (W×L×D) 75×314×25mm Dimensions: (W×L×D) 75×314×25mm YRK-EX series

SDF-01T-1.0A–YC-045 – – – – LDF-01T-1.0A – – SDF-01T-1.3AS–YC-045 – – – – LDF-01T-1.3AS – – SDN-21T-P1.5–YC-600R – – – – BDN-21T-P1.5 – – SDY-01T-P1.6ASV–YC-525R – – – – BDY-01T-P1.6ASV SLJ-1.4 – SEH-001T-P0.6YRS-260 YC-260R – – – WC-260 BEH-001T-P0.6 EJ-PH – SF1F-002(*)-P0.6––––YRK-1220 – – EJ-JFAJ1100 – SF1M-002(*)-M0.6A––––YRK-1220 – – EJ-JFAJ1100 – SF1F-21(*)-P0.6––––YRK-1210 – – EJ-JFAJ1100 – SF1M-21(*)-M0.6A––––YRK-1210 – – EJ-JFAJ1100 – SF3F-002(*)-P2.0–––YRF-882 YRK-8821 – BF3F-002(*)-P2.0 EJ-JFAJ3 – SF3F-01(*)-P2.0–––YRF-881 YRK-8811 – BF3F-01(*)-P2.0 EJ-JFAJ3 – SF3M-01(*)-M2.0N–––YRF-881 YRK-8811 – BF3M-01(*)-M2.0N EJ-JFAJ3 – SF3F-41(*)-P2.0–––YRF-880 YRK-8801 – LF3F-41(*)-P2.0 EJ-JFAJ3 – SF3M-41(*)-M2.0N–––YRF-880 YRK-8801 – LF3M-41(*)-M2.0N EJ-JFAJ3 – SF3F-71(*)-P2.0–––YRF-1070 YRK-1071 – BF3F-71(*)-P2.0 EJ-JFAJ3 – SF3M-71(*)-M2.0N–––YRF-1071 YRK-1071 – BF3M-71(*)-M2.0N EJ-JFAJ3 – SFO-61(T)-250A–YC-270 – – – – LFO-61(T)-250A – – SFPS-61T-250–YC-272 – – – – LFPS-61(T)-250 – – SFT-61T-250N–YC-510 – – – – LFT-61T-250N – – SGF-51(T)-5–YC-065 – – – –LGF-51(T)-5–– LGF-51(T)-5A SGM-51T-5–YC-056 – – – – LGM-51T-5 – – SHCM-A03T-P025YRS-960 – – – – WC-SHCM-A03 – – – SHF-001T-0.8BSYRS-122 YC-122R – – – WC-122 BHF-001T-0.8BS EJ-SMP – SHF-002T-0.8BSYRS-300 – – – – – – EJ-SMP – SHIF-01T-P0.5–YC-986R – – – – – EJ-HILP – SHIF-21T-P0.5–YC-995R – – – – – EJ-HILP – SHIM-01T-P0.5–YC-986R – – – – – EJ-HILR – SHIM-21T-P0.5–YC-995R – – – – – EJ-HILR – SHR-001T-P0.6YRS-580 YC-580R – – – – BHR-001T-P0.6 – – SIM-01(T)-110A–YC-054 – – – – LIM-01(T)-110A – – SIM-41(T)-110B–YC-067 – – – – LIM-41(T)-110B – – SIM-51(T)-250N–YC-321 – – – – LIM-51(T)-250N – – SIN-01T-1.2–YC-340R – – – – LIN-01T-1.2 – – SIN-01T-1.8N–YC-032 – – – – LIN-01T-1.8N – – SIN-21T-1.8S– YC-570 YC-571 SIN-61T-2.6S–YC-560 – – – – LIN-61T-2.6S – – SIN-81T-3.6S–YC-940 – – – – LIN-81T-3.6S – – 6 5 Extraction tool Terminals and parts model number in alphabetical orderInsertion tool Hand toolsHand tools for chain terminals for loose piece terminalsfor loose piece terminals Extraction and Insertion tools YRS series YC series YRM series YRF seriesWC & JUC series JUK's Hand Tools Terminal in loose form model No. YRK . YRK-EX series Note: Contact JST for wire range. Hand tools Crimping tools Crimping tools

SJ2F-002GF-P1.0YRS-8851 – – – YRK-8851 – – EJ-JFAJ2N – SJ2M-002GF-M1.0NYRS-8851 – – – YRK-8851 – – EJ-JFAJ2N – SJ2F-01GF-P1.0YRS-8861 – – – YRK-8861 – – EJ-JFAJ2N – SJ2M-01GF-M1.0NYRS-8861 – – – YRK-8861 – – EJ-JFAJ2N – SJ2M-01GF-M1.0SYRS-8861 – – – YRK-8861 – – EJ-JFAJ2N – SJ2F-21GF-P1.0–––YRF-1120 YRK-1120 – LJ2F-21GF-P1.0 EJ-JFAJ2N – SJ2M-21GF-M1.0N–––YRF-1120 YRK-1120 – LJ2M-21GF-M1.0N EJ-JFAJ2N – SJ4F-71GF-M3.0–––YRF-1130 – – BJ4F-71GF-M3.0 EJ-JFAJ4 – SJ4F-81GF-M3.0–––YRF-1370 – – BJ4F-81GF-M3.0 EJ-JFAJ4 – SJ5F-71GF-M6.5–––YRF-888 – – LJ5F-71GF-M6.5 EJ-JFAJ5 – SJ5M-71GF-M6.5–––YRF-888 – – LJ5M-71GF-M6.5 EJ-JFAJ5 – SJ5F-81GF-M6.5–––YRF-889 – – LJ5F-81GF-M6.5 EJ-JFAJ5 – SJ5M-81GF-M6.5–––YRF-889 – – LJ5M-81GF-M6.5 EJ-JFAJ5 – SJ5F-91GF-M6.5––––––LJ5F-91GF-M6.5 EJ-JFAJ5 – SJ5M-91GF-M6.5––––––LJ5M-91GF-M6.5 EJ-JFAJ5 – SLC-21T-2.0–YC-310 – – – WC-310 LLC-21T-2.0 EJ-LC – SLF/M-01T-P1.3E–YC-202 YRM-201 – – WC-202 LLF/M-01T-P1.3E LEJ-13 LIT-2013 SLF/M-41T-P1.3E–YC-203 – – – WC-203 LLF/M-41T-P1.3E LEJ-13 – SMR-001T-0.6YRS-580 YC-580R – ––BMR-001T-0.6 – – SPA-001T-P0.5–YC-610R––––BPA-001T-P0.5EJ-PH– YC-611R SPAL-001T-P0.5–YC-610R––––BPAL-001T-P0.5 EJ-PAL – YC-611R SPAL-002T-P0.5YRS-1340 – – – – – – EJ-PAL SPF-01T-2.5C–YC-043R – – – – LPF-01T-2.5C – – SPH-002T-P0.5LYRS-241 – – – – – – EJ-PH – SPH-002T-P0.5SYRS-240 – YRM-240 – WC-240 BPH-002T-P0.5S EJ-PH – SPH-004T-P0.5SYRS-243 – – – – – – EJ-PH – SPHD-001T-P0.5– YC-610R –––WC-610 BPHD-001T-P0.5 EJ-PHD-RB – YC-611R SPHD-002T-P0.5YRS-620 – YRM-620 – WC-620 BPHD-002T-P0.5 EJ-PHD-RB – SPND-001T-C0.5YRS-1091 – – – – – – EJ-PND – SPND-002T-C0.5YRS-1090 – – – – – – EJ-PND – 8 7 Extraction tool Terminals and parts model number in alphabetical orderInsertion tool Hand toolsHand tools for chain terminals for loose piece terminalsfor loose piece terminals Extraction and Insertion tools YRS series YC series YRM series YRF seriesWC & JUC series JUK's Hand Tools Terminal in loose form model No. YRK . YRK-EX series Note: Contact JST for wire range. Hand tools Crimping tools Crimping tools

SPS-01T-110–YC-740 – – – WC-740 LPS-01T-110 – – SPS-01T-187(-8)–YC-730 –––WC-730 LPS-01T-187(-8) EJ-PS187 – YC-731 SPS-21T-250–YC-780 – – – WC-780 LPS-21T-250 EJ-PS250 – SPS-21T-250S–YC-780 – – – WC-780 LPS-21T-250S EJ-PS250 – SPS-41T-110–YC-750–––WC-750 LPS-41T-110 – – YC-751 SPS-51T-187(-8)–YC-710–––WC-710 LPS-51T-187(-8) EJ-PS187 – YC-711 SPS-51T-205–YC-770––––LPS-51T-205 – – YC-771 SPS-61T-250–YC-720 – – – WC-720 LPS-61T-250 EJ-PS250 – SPS-61T-250S–YC-721 – – – – LPS-61T-250S EJ-PS250 – SPS-91T-250–––YRF-790 – – BPS-91T-250 EJ-PS250 – SPS-91T-250S–––YRF-791 – – BPS-91T-250S EJ-PS250 – SPUD-001T-P0.5YRS-1320 – – – – – – EJ-PUD – SRWF-61GG-M0.6–YC-840R – – – – BRWF-61GG-M0.6 EJ-RPZ – SRWM-61GG-S0.6–YC-840R – – – – BRWM-61GG-S0.6 EJ-RPZ – SSH-003T-P0.2-HYRS-859 – – – – WC-SH2832 – – – SSH-003GA-P0.2YRS-859 – – – – WC-SH2832 – – – SSHL-002T-P0.2YRS-1140 – – – – WC-GH2630 – – – SSHL-003T-P0.2YRS-859 – – – – WC-SH2832 – – – SSHL-003GA1-P0.2YRS-859 – – – – WC-SH2832 – – – SSF/M-01T-P1.4–YC-500 – – – – BSF/M-01T-P1.4 SLJ-1.4 ITBL-08V SSF/M-21T-P1.4–YC-550 – – – WC-550 BSF/M-21T-P1.4 SLJ-1.4 – STI-01(T)-110N–YC-041 – – – – LTI-01(T)-110N – – 10 9 Extraction tool Terminals and parts model number in alphabetical orderInsertion tool Hand toolsHand tools for chain terminals for loose piece terminalsfor loose piece terminals Extraction and Insertion tools YRS series YC series YRM series YRF seriesWC & JUC series JUK's Hand Tools Terminal in loose form model No. YRK . YRK-EX series Note: Contact JST for wire range. Hand tools Crimping tools Crimping tools

STI-41(T)-110N–YC-063 – – – – LTI-41(T)-110N – – STI-51(T)-250N–YC-322 – – – – LTI-51(T)-250N – – STO-21(T)-205N–YC-053 – – – – LTO-21(T)-205N – – STO-21(T)-250N–YC-102 – – – – LTO-21(T)-250N – – STO-41T-187S–YC-064 – – – – LTO-41T-187S EJ-187S – STO-61(T)-250N–YC-047 – – – – LTO-61(T)-250N – – STO-81(T)-250N–YC-280 – YRF-280 – – LTO-81(T)-250N – – STS/D-002GG-P0.6YRS-1360 – – – – – – EJ-TSD – SVA-41T-P1.1–YC-450 – – – – BVA-41T-P1.1 – – SVF-01T-1.5A–YC-044 – – – – LVF-01T-1.5A – – SVF-01T-1.5N–YC-151 – – – – LVF-01T-1.5N EJ-SV – SVF-01T-2.36N–YC-152 – – – – LVF-01T-2.36N EJ-LV – SVF-42T-P2.0–YC-592 – – – WC-592 BVF-42T-P2.0 VLJ-20 – SVM-42T-P2.0–YC-593 – – – WC-592 BVM-42T-P2.0 VLJ-20 – SVF/M-61T-P2.0–YC-590 – YRF-590 – WC-590 BVF/M-61T-P2.0 VLJ-20 – SVF/M-81T-P2.0–––YRF-591 – WC-591 BVF/M-81T-P2.0 VLJ-20 – YC-160R YRM-160 SVH-21T-P1.1–YC-161R – – – WC-160 BVH-21T-(P)1.1 EJ-NV – YC-164R YRM-164 SVH-41T-P1.1–YC-930R–––WC-930 BVH-41T-P1.1 EJ-NV – YC-931R SVT-41T-P1.1–YC-630 – – – – BVT-41T-P1.1 EJ-VT – SVU-21T-P0.6–YC-990R – – – – BVU-21T-P0.6 EJ-VU4 – SWPKP-21T-0.6–––YRF-1051 – – BWPKP-21T-0.6 – – SWPKR-21T-0.6–––YRF-1050 – – BWPKR-21T-0.6 – – SWPR-001T-P025YRS-980 – – – – WC-JWPF – EJ-JWPF – SWPT-001T-P025YRS-980 – – – – WC-JWPF – EJ-JWPF – SXA-01T-P0.6YRS-701 YC-701R – – – WC-700M BXA-01T-P0.6 EJ-XAG,EJ-XMP – SXA-001T-P0.6YRS-692 YC-692R – – – – BXA-001T-P0.6 EJ-XMP, EJ-XMR IT-XA SXA-001T-P0.6LYRS-691 – – – – WC-691 – – – Extraction tool Terminals and parts model number in alphabetical orderInsertion tool Hand toolsHand tools for chain terminals for loose piece terminalsfor loose piece terminals Extraction and Insertion tools YRS series YC series YRM series YRF seriesWC & JUC series JUK's Hand Tools Terminal in loose form model No. YRK . YRK-EX series Note: Contact JST for wire range. Hand tools Crimping tools Crimping tools

SXAM-01T-P0.6YRS-701 YC-701R – – – WC-700M BXAM-01T-P0.6 EJ-XAW – SXAM-001T-P0.6YRS-692 YC-692R – – – – BXAM-001T-P0.6 EJ-XAW – SXF-01T-P0.7–YC-251 – – – – BXF-01T-(P)0.7 LEJ-7 – SXF-41T-P0.7–YC-252 – – – – BXF-41T-(P)0.7 LEJ-7 – SXH-001T-P0.6YRS-110 YC-110R–––WC-110 BXH-001T-P0.6 XJ-06 – YC-111R SXH-002T-P0.6YRS-480 – – – – – – XJ-06 – SXM-01T-P0.6YRS-701 YC-701R – – – – BXM-01T-P0.6 EJ-XAG,EJ-XMP – SXM-001T-P0.6YRS-692 YC-692R – – – – BXM-001T-P0.6 EJ-XMP, EJ-XMR IT-XA SYF/M-01T-P0.5A–YC-520 – – – WC-520 BYF/M-01T-P0.5A YLJ-0.5 – SYF/M-41T-P0.5A–YC-530 – – – WC-530 BYF/M-41T-P0.5A YLJ-0.5 – SYM-001T-P0.6YRS-121 YC-121R – – – WC-121 BYM-001T-P0.6 SMJ-06 – SYM-01T-P0.7–YC-251 – – – – BYM-01T-(P)0.7 LEJ-7 – SYM-41T-P0.7–YC-252 – – – – BYM-41T-(P)0.7 LEJ-7 – SZF/M-01T-P0.7–YC-390R – – – – BZF/M-01T-(P)0.7 ZLJ-07S – SZF/M-41T-P0.7–YC-380R – – – – BZF/M-41T-(P)0.7 ZLJ-07S – 14 13 Extraction tool Terminals and parts model number in alphabetical orderInsertion tool Hand toolsHand tools for chain terminals for loose piece terminalsfor loose piece terminals Extraction and Insertion tools YRS series YC series YRM series YRF seriesWC & JUC series JUK's Hand Tools Terminal in loose form model No. YRK . YRK-EX series Note: Contact JST for wire range. Hand tools Crimping tools Crimping tools

Contact and Applicable dies J1000 Type II L S S M M L L J1LL J2SL J3SL J2ML J3ML +-- J3LL J32LL Yellow green Handle unit Upper pin Lower pin Case White Yellow Purple Green Orange Red Blue J2000 J300 SeriesAnvil Common partsColor mark Nominal Contact Model No. Crimper Receptacle SF1F-21(*)-P0.6 SJ2F-002GF-P1.0 SJ2F-01GF-P1.0 SJ2F-21GF-P1.0 SF3F-002 (*) -P2.0 SF3F-01 (*) -P2.0 SF3F-41 (*) -P2.0 SF3F-71 (*) -P2.0 SF1M-21(*)-M0.6A J1LA / B J1LC / D J2SA / B J2MA / B J2LA / B J3SA / B J3SC / D J3MA / B J3MC / D J3LA / B J3LC / D J32LA / B SJ2M-002GF-M1.0N SJ2M-01GF-M1.0N SJ2M-21GF-M1.0N SF3M-01 (*) -M2.0N SF3M-41 (*) -M2.0N SF3M-71 (*) -M2.0N TabCrimper Model No. Applicable wire size AWG Insulation O.D. (mm) Die mark A B C D A B A B A B A B C D A B C D A B C D A B #20 #18 #22 KV0.75 #28 #24 #24 #20 #22 #20 #28 #24 #26 #24 #24 #20 #22 #20 #20 #16 #18 #18 #16 #14 1.76 2.03 1.58 1.90 1.20 1.43 1.43 1.53 1.58 1.76 1.20 1.43 1.30 1.11 1.43 1.76 1.58 2.56 1.76 2.35 2.03 2.83 3.10 3.30 YRK-EX

• High reliability of crimping is provided by choosing the crimper and anvil suitable for the wire specification.
• The crimping die can be easily exchanged by only insertion and extraction of pin.
• Common handle and crimping dies can be stored in One case and it is easy to carry. Dies replacement type hand crimping tools Patent pending Dimensions: 376(W)×295(L)×73(D)mm Dimensions: 75(W)×314(L)×25(D)mm Weight: Approx. 800g (When assembling dies) GC ... Gold-plated 2. J300 Finish(*): GF… Nickel-undercoated, 0.38Ж m selective gold-plated GI… Nickel-undercoated, 0.76Ж m selective gold-plated 3. The wear of parts is caused by using hand tool repeatedly. Measure the crimping height daily and conduct periodical inspection of the wearing parts, such as ratchet, pin and so on. *1... Crimper is either the pair of A and B or the pair of C and D. *2... When using wire type UL 2517. Crimping tools Contact and Applicable dies J1000 Type IIL S S M M L L J2000 J300 Series Nominal Contact Model No. Receptacle SF1F-21 (*) -P0.6 SJ2F-002GF-P1.0 SJ2F-01GF-P1.0 SJ2F-21GF-P1.0 SF3F-002 (*) -P2.0 SF3F-01 (*) -P2.0 SF3F-41 (*) -P2.0 SF3F-71 (*) -P2.0 SF1M-21 (*) -M0.6A YRK-1210 YRK-8851 YRK-8861 YRK-1120 YRK-8821 YRK-8811 YRK-8801 YRK-1071 LA / LB LC / LD SA / SB MA / MB LA / LB SA / SB SC / SD MA / MB MC / MD LA / LB LC / LD 2LA / 2LB SJ2M-002GF-M1.0N SJ2M-01GF-M1.0N SJ2M-21GF-M1.0N SF3M-01 (*) -M2.0N SF3M-41 (*) -M2.0N SF3M-71 (*) -M2.0N Tab Hand crimp tools Model No. of crimper Applicable wire size AWG Insulation O.D. (mm) Marking LA LB LC LD SA SB MA MB LA LB SA SB SC SD MA MB MC MD LA LB LC LD 2LA 2LB #22 KV0.75 #20 #18 #28 #24 #24 #20 #22 #20 #28 #24 #26 #24 #24 #20 #22 #20 #20 #16 #18 #18 #16 #14 1.58 1.90 1.76 2.03 1.20 1.43 1.43 1.53 1.58 1.76 1.20 1.43 1.30 1.11 1.43 1.76 1.58 2.56 1.76 2.35 2.03 2.83 3.10 3.30 YRK series hand crimping tools suitable for mass-production
• Crimping work, such as setting contacts to hand tools etc., is facilitated by using a strip contact to improve the productivity.
• A light operation enables to terminate the contact correctly, by adopting straight-ahead crimping.
• A structure, that the carrier of contact doesn't fly off, has been adopted to this tool. YRK Standard type
• When exchanging the crimper, the crimping suitable for the wire specification can be conducted.
• Anvil is fixed to tool. Hand Crimping Tools Dimensions: 75(W)×314(L)×25(D)mm Weight: Approx. 800g (When assembling dies) GC ... Gold-plated 2. J300 Finish(*): GF… Nickel-undercoated, 0.38Ж m selective gold-plated GI… Nickel-undercoated, 0.76Ж m selective gold-plated 3. The wear of parts is caused by using hand tool repeatedly. Measure the crimping height daily and conduct periodical inspection of the wearing parts, such as ratchet, pin and so on. *1... Crimper is either the pair of A and B or the pair of C and D. *2... When using wire type UL 2517.