A0805 ETC
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
! Economical cost, prompt delivery! ! Wide varieties of values ! Choice of 5 or 10 equally spaced taps ! TTL and DTL compatible ! Operating temperature: 0°C to 70°C ! Excellent for applications requiring high delay stability, fast rise times and no jitter, such as memory boards, disk drives, and signal processing
FEATURES
ACTIVE (DIGITAL) DELAY LINES ! Non-standard delay times or tolerances ! Non-symmetrical tap delays ! Dynamic RAM timing delay ! Fast logic TTL available ! Faster rise times ! ECL, H-CMOS, and low power designs available ! Option T - Measurement at both leading and trailing edges ! Option ER - Ceramic IC’s screened to MIL- STD-883, -55 to +125°C per MIL-D-83532 ! Option 39 - -40-+85°C op. temp. OPTIONS Wide selection of sizes! RCD’s digital delay lines have been designed to provide precise tap delays with all the necessary drive and pick-off circuitry. All inputs and outputs are schottky-type and require no additional components to achieve specified delays. Encapsulated/molded construction ensures full com- pliance to all applicable requirements of MIL-D-23859. Units are 100% inspected for solder joint integrity and electrical conformance. A0805 SERIES 5-TAP 8-PIN DIP SA0805 SERIES 5-TAP 8-PIN SIP A1405 SERIES 5-TAP 8-PIN DIP A1410 SERIES 10-TAP 14-PIN DIP
ELECTRICAL CHARACTERISTICS
TEST CONDITIONS @25°C 1) Delay measured at 1.5V on leading edge only with no loads on output. 2) Rise time measured from 0.75V to 2.4V. 3) Delay will inversely vary approximately 4% for every 5% change in supply voltage. 4) Supply voltage (VCC) = 5.0±.25VDC 5) Input test pulse: 3.2V, 2nS rise time, width>40% of total delay, pulse period to be a minimum of 3x the pulse width. * Consult factory for availability. FA specifications subject to change without notice RCD Components Inc., 520 E. Industrial Park Dr., Manchester, NH, USA 03109 Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: sales@rcdcomponents.com www.rcdcomponents.com P/N DESIGNATION: RCD Type Options: (leave blank if standard) ER, T, 39, or as assigned by RCD Total Delay Packaging: B=bulk (standard) A1405 - 100nS - B TYPE A0805 (Available 20nS to 500nS) ← → .500 [12.7] Max. .400 [10.2] Max. .300 [7.62] ← → .300 [7.62] VCC G IN Outputs 7 2 6 3 R .018 [.457] Typ. .100 [2.54] Typ. .250 [6.35] Max. TYPE SA0805 (Available 20nS to 250nS) .340 [8.64] Max. .150 [3.81] Typ. .100 [2.54] Typ. [.51] .018 [.457] Typ. .010 [.254] VCC G IN R Outputs 3 4 5 6 → ←.180 [4.57] Max. TYPE A1410 (Available 50nS to 1000nS) .300 [7.62] Max. .150 [3.81] Typ. .020±.003 [.5±.076] .100 [2.54] .300±.010 [7.62±.254] .400 [10.2] Max. R IN 1
8 OUT
G VCC 13 3 12 4 11 5 10 6 9 ← → TYPE A1405A Auto Insertable Molded (20nS to 1000nS)-- also avail. in .165” profile .25 [6.35] .600±.010 [12.7±.254]← → TYPE A1405 - Economy (20nS to 1000nS) 12 4 10 6 8 OUT RIN 1 G VCC .300±.01 [7.62±.254]← → .280 [7.11] .120 [3.05] Min. .280 [7.11] Max. [.457] Typ. .100 [2.54] Typ. .600±.010 [12.7±.254]← → .100 [2.54] .300 [7.62] ↓ .300±.010 [7.62±.254] .050 [1.27] Typ. .400 [10.2] .010 [.254] latoT yaleD paTrePyaleD )ceSn( 5080A 080AS 5041A 0141A 001 521 051 5.7 5.21 571 002 052 003 053 5.71 004 054 005 057 0001 001 051 002 001 ecnareloTyaleDlatoT) retaergsirevehcihw(Sn2ro%5± ecnareloTyaleDpaT) retaergsirevehcihw(Sn2ro%5± ecnatsiseRnoitalusnI0 001M Ω .nim htgnertScirtceleiDC DV001 emiTesiR. xamSn4