S264-C

LOTO-1 BRADY

Document overview

• PDF pages: 4

Technical content

Page 1

Miniature Circuit Breaker Lockout -​ Pin Out Standard

TDS No. LOTO-​1 Effective Date: 10/03/2017

Description:

Design

• Safe and effective method for locking out miniature circuit breakers
• Require no tools to install! Easily installs with the aid of a push button
• Recommended to lock with lightweight Brady Compact Safety Padlocks, and can accept up to 9/32" shackle diameter Made of a durable glass-​filled nylon, available as each or in packs of 6"

Material Made of Glass​-filled nylon

• Springs made of Stainless Steel
• Color: Outer Housing – Red (PMS 1805C)

Chemical

Color: Inner Housing -​ Black

Acetone

• UL rating – UL94 – HB Rating

Acetone Chlorine, chlorine water

Technical Data Sheet

°C

Chemical

°C

25 Petroleum

25

60 Turpentine oil

25

25 Turpentine substitute (white spirit) 25

Fuel, engine: Gasoline (normal &

85 Trichloroethane 1,1,1

45

Temperature Range

premium grade)

< 120

< 120 Lubricating oil: HD engine oils,

Plastic Housings: - ​20° to 120°C (0° to 250°F)

Lubrication oil: gear oil

hydraulic oils, transformer oils

Fuel, engine: M15 mixture (15%

70 Water (including seawater)

25

Chemical Resistance

methanol)

All approved chemicals listed are based on the

Water (including seawater),

Methanol

25

80

manufactures specified chemical resistance chart for

chlorinated (<0,5 mg/l)

plastic material only. All other materials in the device are made of Stainless steel.

Dimensions

Warranty Note: ​All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information. Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no

independent representations or warranties, expressed or implied, and assumes no liability in connection with the use of this information.

Circuit Breaker Cross Reference Guide

Page 2

Details: MSDS Information

​HAZARDS IDENTIFICATION 1. This product is NOT DANGEROUS and contains no hazardous ingredients

1. ​ ​FIRST AID MEASURES/​HEALTH INFORMATION ​PROTECTION

FIRE-FIGHTING MEASURES

Page 3

ACCIDENTAL RELEASE MEASURES

4.

HANDLING ​AND ​STORAG​E 5.

EXPOSURE ​CONTRO​L​S​/​PERSONAL PROTECTION 6.

PHYSICAL AND ​CHEM​I​CA​L ​PROPERTIES 7.

S​TABILIT​Y ​AND REACTIVITY 8. 8.1 ​Cond​itions ​to Avoid Higher Temperatures and direct sunlight (chemical resistance is excellent) Highly ​stable, but ​tempe​ratures ​over 480 F may cause degradation

8.2 Materials to Avoid No data available

8.3 ​Hazardou​s ​Decomposition Products Under ​fire and oxygen-lean conditions ​may ​cause monoxide and irritating ​smoke

9. ECOLOGICAL INFORMATION

DISPOSAL ​CONSIDERATIONS 10.

None of the materials in this product are ​Recyclable, ​dispose of ​all ​materials in ​accordance with ​an ​applicable ​federal, state, and local law.

TRAN​SPOR​T INFORMATION 11.

No data available

REGULATORY INFORMATION

12.

​ ​13. ​OTHER INFORMATION

​ No data available

Shelf Life: Shelf life is ​two years from the date of receipt​ for this product as long as this product is stored in its original packaging in an environment below 80° F (27° C) and 60% RH. It remains the responsibility of the user to assess the risk of using this product. We encourage customers to develop testing protocols that will qualify a product's fitness for use in their actual application.

Trademarks:

Page 4

Note: ​All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTY

Brady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under no circumstances

will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2019 Brady Worldwide, Inc. | All Rights Reserved Material may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 West Good Hope Road | Milwaukee, Wisconsin 53223 | USA | Tel: 414-​358-​6600 | Fax: 414-​228-​5770