RT9101 ETC1

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Tope Co., Ltd. tel: +886-2-8228-0658 http://www.sensor.com.tw fax: +886-2-8228-0659 e-mail: tope@ms1.hinet.net 30o 45o align marks for zero output clockwise shaft rotation counter-clockwise shaft rotation ALL DIMENSIONS ARE IN INCHES [MM] 2.32 [58.9] 0.18 [4.6] 0.86 [21.9] 1.000 [25.40] 0.2497 in. or 5.995 mm 0.2494 in. or 5.970 mm #8-32 x 0.180 [4.57]@90o apart on a 4.15 [105.4] dia. BC (4 places) optional M4 x 4.5 mm @ 90o apart on a 105.4 mm dia. BC (4 places) DIA. GENERAL next page ELECTRICAL Input Resistance....500, 1K, 5K, 10K ohms ( + 10%) or adjustable bridge, see ENVIRONMENTAL and Celesco’s model RT9101 provides a voltage feedback signal for rotational position. The sensing element of this device is a precision plastic-hybrid potentiometer which provied superb linearity and resolution. This innovative sensor from Celesco, desinged to meet tough NEMA-4 and IP67 environmental standards, is available in full- stroke measurement ranges of 1/4 to 50 turns. Because the sensor is potentiometric, the RT9101 is absolute and will maintain position information even after a loss of power. t Up to 50 Turns t Industrial Grade t Precision Potentiometric Output Rotational Transducer RT9101 Specification Summary: V (+in) OUTPUT VOLTAGE 0 V FULL STROKE RANGE Electrical Output Signal:

7800 Deering Avenue • Canoga Park, CA • 91309 • tel: (800) 423-5483 • (818) 884-6860 • fax: (818) 340-1175

www .celesco.com • info@celesco.com RT 9101- - - 101 order code: R A B C D E F G order code: enclosure material: A powder-painted aluminum 303 stainless steel order code: shaft diameter: mounting holes: B 0.25 inch diameter 6 mm diameter 8-32 x 0.25 in. M4 x 6 mm D +in -out -in +out max cw rotation max ccw rotation in out common 1234

500 W 1K W 5K W 10K W

0...30 mV/V adjustable bridge order code: sensing circuit: full scale output: adjustable from 0 to 30mV/V zero adjust: from full retraction to 50% of full stroke order code: order code: R clockwise shaft rotations, min: accuracy (% of f.s.): potentiometer cycle life*: 0R25 0R50 0001 0002 0003 0.25 0.50 1 2 3 R clockwise shaft rotations, min: accuracy (% of f.s.): potentiometer cycle life*: 0005 0010 0020 0030 0050 5 1 02 03 05 0 5 x 105 2.5 x 105 2.5 x 105 2.5 x 105 2.5 x 105 t Ordering Information Model Number: Full Stroke Range: Enclosure Material: Mounting Configuration and Shaft Diameter: RT9101 • Rotational Transducer • Potentiometric Output Output Signals: *note: potentiometer cycle life is defined as the minimum number of times the sensor can be cycled back and forth, from beginning to end, before any measureable degradation of the output signal occurs.

www .celesco.com • info@celesco.com order code:F contact view contact view A B C D E F A B C D E F connections connections connections connections standard bridge A = +IN A = +IN B = COMMON B = -IN C = +OUT C = -OUT D = +OUT standard bridge WHT = +IN BLK = COMMON not available GRN = OUT standard bridge RED = +IN RED = +IN BLK = COMMON BLK = -IN GRN = OUT WHT = -OUT GRN = +OUT standard bridge A = +IN A = +IN B = COMMON B = -IN C = +OUT C = -OUT D = +OUT 6-pin plastic connector and mating plug 6-pin metal connector and mating plug 10 ft. waterproof cable 25 ft. instrumentation cable 1234 67 67, 68* 65 67 IP rating: NEMA rating: electrical connection: 3-CONDUCTOR, 18 GA., TYPE SJOW-A ~0.35 in. (9 mm) dia. MULTICONDUCTOR, 24 GA., SHIELDED ~0.2 in. (5 mm) dia. MS3106E-14S-6S 5/16" (8 mm) max cable dia.

16 AWG max conductor size

~ 3.2 in. (81 mm) MS3106E-14S-6S 5/16" (8 mm) max cable dia. ~ 3.2 in. (81 mm) t Sample Model Number Electrical Connection: Specifications:Full Clockwise Rotation: 5 turns (5 clockwise shaft rotations) Full Counter-Clockwise Rotation: 120 degrees Enclosure Material: powder-painted aluminum Electrical Connection: 6-pin plastic connector Dampening: magnetic dampening IT9101- - -1 1 1120 030 1 order code: CCW CW A B C D PT9101 • Rotational Transducer • Potentiometric Output note: *requires factory submersion test **applies to stainless steel enclosure, see