RT65

RT65 ASTRODYNE

Document overview

• PDF pages: 4

Technical content

Page 1

65W Triple Output Switching Power Supply

Model Number Output Volts Output Amps Ripple & Noise

TRIPLE OUTPUT

RT65-A

5 Volts(DC)

6 Amps

80mV pk-pk

12 Volts(DC)

2.8 Amps

120mV pk-pk

-5 Volts(DC)

0.5 Amps

80mV pk-pk

RT65-B

5 Volts(DC)

5.0 Amps

80mV pk-pk

12 Volts(DC)

2.8 Amps

120mV pk-pk

-12 Volts(DC)

0.5 Amps

80mV pk-pk

RT65-C

5 Volts(DC)

5.0 Amps

80mV pk-pk

15 Volts(DC)

2.2 Amps

120mV pk-pk

-15 Volts(DC)

0.5 Amps

80mV pk-pk

RT65-D

5 Volts(DC)

4.0 Amps

80mV pk-pk

24 Volts(DC)

1.5 Amps

150mV pk-pk

12 Volts(DC)

1.0 Amps

120mV pk-pk

RT65 series

Universal AC input

Protections:Short circuit/Over load/Over voltage

Cooling by free air convection

LED indicator for power on

All using 105°C long life electrolytic capacitors

High efficiency, long life and high reliability

Min Load Line Reg Load Reg Volt Tolerance

0.5~8Amps

±0.5%

±1.0%

±2.0%

0.2~3.5Amps ±1.5%

±3.0%

±6.0%

0~1Amps

±0.5%

±1.0%

±5.0%

0.5~8Amps

±0.5%

±1.0%

±2.0%

0.2~3.5Amps ±1.5%

±3.0%

±6.0%

0~1Amps

±0.5%

±1.0%

±5.0%

0.5~8Amps

±0.5%

±1.0%

±2.0%

0.2~3Amps

±1.5%

±3.0%

+8,-4%

0~1Amps

±0.5%

±1.0%

±5.0%

0.5~8Amps

±0.5%

±1.0%

±2.0%

0.2~2Amps

±1..5%

±3.0%

+4,-6%

0.1~1Amps

±2.0%

±4.0%

±6.0%

Page 2

65W Triple Output Switching Power Supply

INPUT SPECIFICATIONS

Input Voltage Range

90 ~ 264 VAC; 125~373 Volts(DC)

Frequency Range

47-63 Hz

Inrush Current, typ: (cold start) 40Amps/230VAC Input Current

2.0 Amps. @ 115VAC 1.2 Amps. @ 230VAC

Leakage current

< 2mAmps /240VAC

OUTPUT SPECIFICATIONS

Voltage and Current

See Selection Chart

Line Regulation (Note 3)

See Selection Chart

Load Regulation (Note 4)

See Selection Chart

Voltage Tolerance (Note 2)

See Selection Chart

Ripple/Noise (Note 1)

See Selection Chart

Hold Up Time @ FL

60mS/230VAC 14mS/115VAC

Setup, Rise Time @ FL

500ms, 20m/230VAC 1200mS, 30mS/115VAC

Over Voltage Protection

5Volts only: : 5.75 ~ 6.75VDC Hiccup mode, auto recover

Over Current Protection

110 ~ 150% rated output power

DC Volt Adjust

5Volts only: 4.75 ~ 5.5V

GENERAL SPECIFICATIONS

Safety

UL60950-1, TUV EN60950-1 Approved

Insulation Resistance

≥ 100MΩ / 500Volts (DC)

EMI

Compliance to EN55022 (CISPR22) Class B

Harmonic Current

Compliance to EN61000-3-2,-3

Efficiency 77% (RT65-A/B)

78% (RT65-C) 80% (RT65-D)

Isolation

3000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

RT65 series

EMS

Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204,EN61000-6-2(EN50082-2) Heavy Industry Level, Criteria A

ENVIRONMENTAL SPECIFICATIONS

Oper. Temperature -25°C to +70°C (See Derate Curve) Storage Temperature -40°C to +85°C, 10~95% RH Relative Humidity 20~90% RH non cond Temperature Coefficient 0.03% / °C (0-50°C) on +5V output MTBF 254.6KHrs min, MIL-HDBK-217F(25°C ) Vibration 10~500Hz, 5G10min./1cycle, period for

60min. each along X, Y, Z axes

PHYSICAL SPECIFICATIONS

Size Millimeters

129 x 98 x 38

Inches

3.90” x 3.82 ” x 1.42 ”

Weight

15.52 oz (440g)

NOTE

1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Tolerance : includes set up tolerance, line regulation and load regulation. 3. Line regulation is measured from low line to high line at rated load. 4. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.

Page 3

RT65 series

65W Triple Output Switching Power Supply

Page 4

RT65 series

65W Triple Output Switching Power Supply