RT1206FRE073K01L YAGEO

Document overview

  • PDF pages: 10

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

Page 2

PDF page 2 diagram

ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC

SCOPE

Both part numbers are identified by the series, size, tolerance, packing

This specification describes

type, temperature coefficient, taping reel and resistance value.

RT0402 to RT2512 high precision - high stability chip resistors with

D oorrddeerriinngg ccooddee

YYA AG

GEEO

O BBRRA

AN ND

lead-free terminations made by

GLOBAL PART NUMBER (PREFERRED)

thin film process.

RT XXXX F X X XX XXXX L

(1) (2) (3) (4) (5) (6) (7)

APPLICATIONS z Converters

(1) SIZE

z Printer equipment

0402 / 0603 / 0805 / 1206 / 1210 / 2010 / 2512

z Server board

(2) TOLERANCE

z Telecom

W = ±0.05%

z Consumer

B = ±0.1% C = ±0.25%

FEATURES

D = ±0.5%

z Halogen Free Epoxy

F = ±1%

z RoHS compliant

(3) PACKAGING TYPE

  • Products with lead free terminations meet RoHS

R = Paper/PE taping reel

K = Embossed taping reel

requirements

(4) TEMPERATURE COEFFICIENT OF RESISTANCE

  • Pb-glass contained in electrodes, resistor element and glass are

B = 10 ppm/°C

exempted by RoHS

(5) TAPING REEL

z Reducing environmentally

07 = 7 inch dia. Reel

hazardous wastes z High component and equipment

(6) RESISTANCE VALUE

reliability

C = 15 ppm/°C

D = 25 ppm/°C

E = 50 ppm/°C

10 = 10 inch dia. Reel

13 = 13 inch dia. Reel

There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need

z Saving of PCB space

to mention the last zero after R/K/M, e.g.1K2, not 1K20.

z None forbidden-materials used

Detailed resistance rules show in table of “Resistance rule of global part number”.

in products/production

(7) DEFAULT CODE Letter L is system default code for order only (Note)

Resistance rule of global part number Resistance code rule

XRXX (1 to 9.76 Ω)

XXRX (10 to 97.6 Ω) XXXR (100 to 976 Ω) XKXX (1 to 9.76 KΩ) XMXX

ORDERING EXAMPLE

The ordering code of a RT0603 chip

Example

resistor, TC 50 value 56 X with ±0.5% tolerance, supplied in 7-inch

1R = 1 Ω

tape reel is: RT0603DRE0756RL.

1R5 = 1.5 Ω 9R76 = 9.76 Ω

NOTE

10R = 10 Ω

  1. All our RSMD products meet RoHS

97R6 = 97.6 Ω

compliant and Halogen Free. "LFP" of the internal 2D reel label mentions

100R = 100 Ω

"Lead Free Process"

1K = 1,000 Ω

  1. On customized label, "LFP" or specific

9K76 = 9760 Ω

symbol can be printed

1M = 1,000,000 Ω

(1 to 9.76 MΩ) 9M76= 9,760,000 Ω

Page 3

PDF page 3 diagram

PPH

HYYC

CO OM

MPP BBRRA

AN ND D oorrddeerriinngg ccooddeess

Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. For matching traditional types with size codes, please refer to “Comparison table of traditional types and sizes”.

GLOBAL PART NUMBER (PREFERRED)

For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.

12NC CODE

2390 X

XX

X

XXXX

(4) (5)

(1) (2)

(3)

TCR (2) PACKING CODE TOL. (4) RESISTANCE

START WITH (1)

BY SIZE (inch) (3) (%)

RANGE

(ppm/°C)

2390 8 = ±10 0402: 07 = 7'' reel 7 = ±1 The remaining 4 digits

represent the resistance

7 = ±15

27 = 10'' reel 6 = ±0.5

value with the last digit

6 = ±25

47 = 13'' reel 5 = ±0.25

indicating the multiplier

4 = ±50 0603: 04 = 7'' reel 4 = ±0.1

as shown in the table of “Last digit of 12NC”.

24 = 10'' reel 3 = ±0.05 44 = 13'' reel

0402: 10Ω ≤ R < 121KΩ 0603: 5.1 Ω ≤ R ≤ 681 KΩ

0805: 01 = 7'' reel

0805: 5.1Ω ≤ R ≤ 1.5 MΩ

21 = 10'' reel

1206: 5.1Ω ≤ R ≤ 1.5 MΩ

41 = 13'' reel

1210: 5.1Ω ≤ R ≤ 1.5 MΩ

1206: 11 = 7'' reel

2010: 10Ω ≤ R ≤ 1 MΩ

31 = 10'' reel

2512: 10Ω ≤ R ≤ 1 MΩ

51 = 13'' reel 1210: 12 = 7'' reel 32 = 10'' reel 52 = 13'' reel 2010: 15 = 7'' reel 2512: 18 = 7'' reel

Exceptions to above packing code definitions:

0805 TC50 with 1%, supplied in 13" reel, the packing code is 02. 0603 TC50 with 1%, supplied in 13" reel, the packing code is 03. 2512 TC15, in 7" reel, the packing code is 35. 2010 TC15, in 7" reel, the packing code is 31.

ORDERING EXAMPLE

L (6)

Comparison table of traditional

DEFAULT

types and sizes

CODE

TF X X

X

(NOTE)

(4)

(1) (2) (3)

Letter L is

STARTSIZE

TCR TOL.

system

WITH CODE (ppm/°C) (%)

default

TF 3 = 0402 4 = ±10 0 = ±1

code for

2 = 0603 3 = ±15 1 = ±0.5

order only

1 = 0805 1 = ±25 2 = ±0.25 0 = 1206 2 = ±50 3 = ±0.1 5 = 1210

4 = ±0.05

7 = 2010 6 = 2512 Ä Example:

TF321 = RT0402, TC50, ±0.5% tolerance

Resistance decade (3)

Last digit

1 to 9.76 X

8

10 to 97.6 X

9

100 to 976 X

1

1 to 9.76 kX

2

10 to 97.6 kX

3

100 to 976 kX

4

1 to 9.76 MX

5

10 to 97.6 MX

6

Example: 1 X

= 1008 or 108 33 kX = 3303 or 333 10 MX = 1006 or 106

The ordering code of a TF221 resistor, TC50, value 56 X, with ±0.5% tolerance, supplied in tape of 5,000 units per reel is: 239040465609L or RT0603DRE0756RL.

NOTE

  1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed

Page 4

PDF page 4 diagram

MARKING RT0805 / RT1206 / RT1210 / RT2010 / RT2512

Either resistance in E-24 or E-96: 4 digits

00

First three digits for significant figure and 4th digit for number of zeros

Fig. 1 Value = 10 kΩ

RT0603

E-24 series: 3 digits First two digits for significant figure and 3rd digit for number of zeros

Fig. 2 Value = 12 kΩ

E-96 series: 3 digits for 0603±1% EIA-96 marking method

Fig. 3 Value = 12.4 kΩ

RT0402 / RESISTANCE VALUE IS NOT IN E-24 / E96 SERIES

No marking

Fig. 4

For further marking information, please see special data sheet “Chip resistors marking”.

CONSTRUCTION The resistors are constructed out of a high-grade ceramic

OU

UTTLLIIN

NEESS

O

body. Internal metal electrodes are added at each end and

PDF page 4 diagram

connected by a resistive layer. The resistive layer is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 5.

DIMENSION Table 1 For outlines see fig. 5 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RT0402 1.00 ±0.10 0.50 ±0.05 0.30 ±0.05 0.20 ±0.10 0.25 ±0.10 RT0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RT0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 RT1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 RT1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20 RT2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 RT2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20

Page 5

PDF page 5 diagram

ELECTRICAL CHARACTERISTICS Table 2 Operating

Max. Max. Power

Temperature

Work Overload

TYPE

Rating Vol. (1) Vol.

Range

Vol.

RT0402 –55 °C to +125 °C 1/16W 50V 100V

75V

RT0603 –55 °C to +125 °C 1/10W 75V 150V

100V

RT0805 –55 °C to +125 °C 1/8W 150V 300V

200V

RT1206 –55 °C to +125 °C 1/4W 200V 400V

300V

RT1210 –55 °C to +125 °C 1/4W 200V 400V

400V

RT2010 –55 °C to +125 °C 1/2W 200V 400V

400V

RT2512 –55 °C to +125 °C 3/4W 200V 400V

400V

NOTE

Resistance Range (E-24/E-96 series)(2) & Tolerance

Dielectric T.C.R. Withstand (ppm/°C) ±0.05% ±0.1% ±0.25% ±0.5%

±1.0%

±50

--- 10~121k 10~121k 10~121k 10~121k

±25

--- 10~121k 10~121k 10~121k

---

±15

--- 10~100k 10~100k

--- ---

--- 10~100k 10~100k

--- ---

±10 ±50

--- 10~681k 5.1~681k 5.1~681k 5.1~681k

±25 1k~47k 10~681k 10~681k 10~681k

---

±15 1k~47k 10~100k 10~100k

--- ---

1k~47k 10~100k 10~100k ±10

--- ---

±50

--- 10~1.5M 5.1~1.5M 5.1~1.5M 5.1~1.5M

±25 100~100k 10~1.5M 10~1.5M 10~1.5M

---

±15 100~100k 10~100k 10~100k

--- ---

±10 100~100k 10~100k 10~100k

--- ---

±50

--- 10~1.5M 5.1~1.5M 5.1~1.5M 5.1~1.5M

±25 100~100k 10~1.5M 10~1.5M 10~1.5M

---

±15 100~100k 10~100k 10~100k

--- ---

±10 100~100k 10~100k 10~100k

--- ---

±50

--- 10~1M 5.1~1M 5.1~1M 5.1~1M

±25 100~100k 10~1M 10~1M 10~1M

---

±15 100~100k 10~100k 10~100k

--- ---

±10 100~100k 10~100k 10~100k

--- ---

±50

--- 10~1M 10~1M 10~1M 10~1M

±25 100~100k 10~1M 10~1M 10~1M

---

±15 100~100k 10~100k 10~100k

--- ---

±10 100~100k 10~100k 10~100k

--- ---

±50

--- 10~1M 10~1M 10~1M 10~1M

±25 100~100k 10~1M 10~1M 10~1M

---

±15 100~100k 10~100k 10~100k

--- ---

±10 100~100k 10~100k 10~100k

--- ---

  1. The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8” 2. Value of E-192 series is on request

Page 6

PDF page 6 diagram

FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.

PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE

REEL DIMENSION RT0402 RT0603

RT0805 RT1206 RT1210 RT2010 RT2512

Paper/PE taping reel (R)

7" (178 mm)

10,000 5,000 5,000 5,000 5,000

--- ---

10" (254 mm) 20,000

10,000 10,000 10,000 10,000

--- ---

13" (330 mm)

50,000 20,000 20,000 20,000 20,000

--- ---

Embossed taping reel (K)

7" (178 mm)

--- --- --- --- --- 4,000 4,000

NOTE

  1. For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”

FUNCTIONAL DESCRIPTION

PDF page 6 diagram

PPO OW

WEERR RRA

ATTIIN

NG G

Each type rated power at 70°C: RT0402=1/16 W, RT0603=1/10 W, RT0805=1/8 W, RT1206=1/4 W, RT1210=1/4 W, RT2010=1/2 W, RT2512=3/4 W.

RATED VOLTAGE

The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula:

V=√(P X R) or max. working voltage whichever is less

Where

V=Continuous rated DC or AC (rms) working voltage (V)

P=Rated power (W)

R=Resistance value (X)

Page 7

PDF page 7 diagram

TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

IEC 60115-1 4.8

Temperature

At +25/–55 °C and +25/+125 °C

Refer to table 2

Coefficient of Resistance

Formula:

(T.C.R.)

R2–R1 T.C.R= ------------------------- ×106 (ppm/°C) R1(t2–t1)

Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms

R2=resistance at test temperature in ohms

At 70±5 °C for 1,000 hours, RCWV applied for

IEC 60115-1 4.25.1

±(0.5%+0.05 Ω)

Life/Endurance

1.5 hours on, 0.5 hour off, still air required

1,000 hours at 155±5 °C, unpowered

IEC 60068-2-2

±(0.5%+0.05 Ω)

High Temperature Exposure/ Endurance at Upper Category Temperature

Each temperature / humidity cycle is defined at 8

MIL-STD-202G Method-106G

±(0.5%+0.05 Ω)

Moisture

hours, 3 cycles / 24 hours for 10d. with 25 °C /

Resistance

65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion

MIL-STD-202G Method-107G

±(0.5%+0.05 Ω) for 10 KΩ to

Thermal Shock

-55/+125 °C Number of cycles required is 300. Devices

10 MΩ

unmounted

±(0.5%+0.05 Ω) for others

Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air

Steady state for 1000 hours at 40 °C / 95% R.H.

IEC 60115-1 4.37

±(0.5%+0.05 Ω)

Humidity (steady state)

RCWV applied for 1.5 hours on and 0.5 hour off

Page 8

PDF page 8 diagram

TEST

TEST METHOD

PROCEDURE

REQUIREMENTS

2.5 times of rated voltage or maximum

IEC60115-1 4.13

±(0.5%+0.05 Ω)

Short Time Overload

overload voltage whichever is less for 5 sec at

No visible damage

room temperature

Chips mounted on a 90mm glass epoxy resin

IEC 60068-2-21

±(0.25%+0.05 Ω)

Board Flex/ Bending

PCB (FR4)

No visible damage

Bending: see table 6 for each size Bending time: 60±5 seconds

The resistor shall be subjected to a DC rated

IEC 60068-2-1

Low Temperature

±(0.5%+0.05 Ω)

voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C

Operation

No visible damage

This constitutes shall be repeated for 96 hours However the applied voltage shall not exceed the maximum operating voltage

IEC 60115-1 4.6

≥10 GΩ

Insulation Resistance

Rated continuous overload voltage (RCOV) for 1 minute Details see below table 5

IEC 60115-1 4.7

Dielectric Withstand

No breakdown or flashover

Maximum voltage (Vrms) applied for 1 minute

Voltage

Details see below table 5

Solderability

Electrical Test not required

IPC/JEDEC J-STD-002B test B

Well tinned (≥95%

  • Wetting

covered)

Magnification 50X

No visible damage

SMD conditions: 1st step: method B, aging 4 hours at 155°C dry heat 2nd step: leadfree solder bath at 245±3°C Dipping time: 3±0.5 seconds

Leadfree solder, 260 °C, 30 seconds

IPC/JEDEC J-STD-002B test D

  • Leaching

No visible damage

immersion time

Condition B, no pre-heat of samples.

IEC 60068-2-58

±(0.5%+0.05 Ω)

  • Resistance to

Leadfree solder, 260 °C, 10 seconds

Soldering Heat

No visible damage

immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol

Page 9

PDF page 9 diagram

Table 5 Criteria of rated continued working voltage and overload voltage TYPE

RT0402 RT0603

RT0805 RT1206 RT1210 RT2010 RT2512

Voltage (DC/unit: V); (AC/ unit: Vrms)

100 100 300 500 500 500 500

Table 6 Bending for sizes 0402 to 2512 TYPE

RT0402

RT0603

RT0805

RT1206

RT1210

RT2010

RT2512

Specification (mm)

5

3

3

2

2

2

2

Page 10

PDF page 10 diagram

REVISION HISTORY

CHANGE NOTIFICATION DESCRIPTION

REVISION DATE

  • Test Items and methods updated

Version 4 Oct 21, 2009 -

  • Test requirements upgraded
  • Change to dual brand datasheet that describe RT0402 to RT2512 with

Version 3 Jul 11, 2008 -

RoHS compliant

  • Description of "Halogen Free Epoxy" added
  • Define global part number
  • Modify electrical characteristic
  • New datasheet for thin film high precision - high stability chip resistors sizes

Version 2 Dec 26, 2005 -

of 0201/0402/0603/0805/1206/1210/2010/2512, 1%, 0.5%, 0.25%, 0.1%, 0.05%, TC25/50 with lead-free terminations

  • Replace the 0402 to 1210 parts of pdf files: TFx10_1_1, TFx11_.5_2, TFx12_.25_2, TFx13_.1_3, TFx14_.05_1, TFx20_1_2, TFx21_.5_2, TFx22_.25_2, TFx23_.1_2, TFx24_.05_1, and combine into a document.
  • Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape)

“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”