RT0100LRA07XXXXL YAGEO
Document overview
- PDF pages: 9
Technical content
Page 1

DATA SHEET
THIN FILM CHIP RESISTORS
High precision - high stability
RT series
0.01% TO 1%, TCR 5 TO 50 sizes 0100/ 0201/ 0402/ 0603/ 0805/ 1206/
1210/ 2010/ 2512 RoHS compliant
Page 2

ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
SCOPE
Both part numbers are identified by the series, size, tolerance, packing
This specification describes RT
type, temperature coefficient, taping reel and resistance value.
series high precision - high stability
D oorrddeerriinngg ccooddee
chip resistors with lead-free
YYA AG
GEEO
O BBRRA
AN ND
terminations made by thin film
GLOBAL PART NUMBER (PREFERRED)
process.
RT XXXX F X X XX XXXX L
(1) (2) (3) (4) (5) (6) (7)
APPLICATIONS
(1) SIZE
⚫ Converters
RT0100 / 0201 / 0402 / 0603 / 0805 / 1206 / 1210 / 2010 / 2512
⚫ Printing equipment
(2) TOLERANCE
⚫ Server board
L = ±0.01%
⚫ Telecom
P = ±0.02%
⚫ Consumer
W = ±0.05% B = ±0.1%
FEATURES
C = ±0.25%
⚫ Halogen Free Epoxy
D = ±0.5%
⚫ RoHS compliant
F = ±1%
⚫ Reducing environmentally
(3) PACKAGING TYPE
hazardous wastes
R = Paper/PE taping reel
K = Embossed taping reel
⚫ High component and
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
equipment reliability ⚫ Saving of PCB space
A = 5 ppm/°C B = 10 ppm/°C
⚫ None forbidden-materials used
C = 15 ppm/°C
in products/production
D = 25 ppm/°C E = 50 ppm/°C (5) TAPING REEL
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
07 = 7 inch dia. Reel 7W= 7 inch dia. Reel with high power (1W for 2512)
(6) RESISTANCE VALUE There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point. Detailed resistance rules show in table of “Resistance rule of global part number”.
(7) DEFAULT CODE Letter L is system default code for order only (Note)
Resistance rule of global part number Resistance code rule
XRXX (1 to 9.76 Ω)
XXRX (10 to 97.6 Ω)
XXXR (100 to 976 Ω)
XKXX (1 to 9.76 KΩ)
XMXX (1 to 9.76 MΩ)
ORDERING EXAMPLE
The ordering code of a RT0603
Example
chip resistor, TC 50 value 56 Ω
1R = 1 Ω
with ±0.5% tolerance, supplied in
1R5 = 1.5 Ω
7-inch tape reel is:
9R76 = 9.76 Ω
RT0603DRE0756RL.
10R = 10 Ω 97R6 = 97.6 Ω
NOTE
- All our RSMD products meet RoHS
100R = 100 Ω
compliant and Halogen Free. "LFP" of the internal 2D reel label mentions
1K = 1,000 Ω 9K76 = 9760 Ω
"Lead Free Process" 2. On customized label, "LFP" or
1M = 1,000,000 Ω
specific symbol can be printed
9M76= 9,760,000 Ω
Page 3

PPH
HYYC
CO OM
MPP BBRRA
AN ND D oorrddeerriinngg ccooddeess
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products. For matching traditional types with size codes, please refer to “Comparison table of traditional types and sizes”.
GLOBAL PART NUMBER (PREFERRED)
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2390 X
XX
X
XXXX
(4) (5)
(1) (2)
(3)
TCR (2)
TOL . (4)
START
PACKING CODE
RESISTANCE
WITH (1)
BY SIZE (inch) (3) (%)
RANGE
(ppm/°C)
2390 8 = ±10 0402: 07 = 7'' reel 7 = ±1 The remaining 4 digits
L (6)
Comparison table of traditional
DEFAULT
types and sizes
CODE
TF X X
X
(NOTE)
(4)
(1) (2) (3)
Letter L is
START SIZE TCR TOL.
represent the resistance
system
WITH CODE (ppm/°C) (%)
7 = ±15
47 = 13'' reel 6 = ±0.5
value with the last digit
default
TF 3 = 0402 4 = ±10 0 = ±1
6 = ±25 0603: 04 = 7'' reel 5 = ±0.25
indicating the multiplier
code for
24 = 10'' reel 4 = ±0.1 as shown in the table of
2 = 0603 3 = ±15 1 = ±0.5
4 = ±50
order only (Note)
“Last digit of 12NC”.
1 = 0805 1 = ±25 2 = ±0.25
44 = 13'' reel 3 = ±0.05
0 = 1206 2 = ±50 3 = ±0.1
0402: 4.7Ω ≤ R ≤ 240KΩ
0805: 01 = 7'' reel
5 = 1210
4 = ±0.05
0603: 1 Ω ≤ R ≤ 1MΩ
41 = 13'' reel
7 = 2010
0805: 1Ω ≤ R ≤ 1.5 MΩ
1206: 11 = 7'' reel
6 = 2512
1206: 1Ω ≤ R ≤ 1.5 MΩ
51 = 13'' reel
Example:
1210: 4.7Ω ≤ R ≤ 1 MΩ
1210: 12 = 7'' reel
TF321 = RT0402, TC50, ±0.5% tolerance
2010: 4.7Ω ≤ R ≤ 1 MΩ
52 = 13'' reel
2512: 4.7Ω ≤ R ≤ 1 MΩ
2010: 15 = 7'' reel 2512: 18 = 7'' reel
Exceptions to above packing code definitions: 0805 TC50 with 1%, supplied in 13" reel, the packing code is 02. 0603 TC50 with 1%, supplied in 13" reel, the packing code is 03. 2512 TC15, in 7" reel, the packing code is 35. 2010 TC15, in 7" reel, the packing code is 31.
ORDERING EXAMPLE
Resistance decade (3)
Last digit
1 to 9.76 Ω
8
10 to 97.6 Ω 100 to 976 Ω
1
1 to 9.76 kΩ
2
10 to 97.6 kΩ
3
100 to 976 kΩ
4
1 to 9.76 MΩ
5
10 to 97.6 MΩ
6
Example: 1 Ω = 1008 or 108 33 kΩ = 3303 or 333 10 MΩ =
1006 or 106
The ordering code of a TF221 resistor, TC50, value 56 Ω , with ±0.5% tolerance, supplied in tape of 5,000 units per reel is: 239040465609L or RT0603DRE0756RL.
NOTE
- All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed
Page 4

MARKING RT0100 / RT0201 / RT0402 / RESISTANCE VALUE IS NOT IN E-24 / E96 SERIES
No marking
Fig. 1
RT0603
E-24 series: exception values 10/11/13/15/20/75 of E-24 series, one short bar
563
under marking letter
Fig. 2 Value = 56 kΩ
E-96 series: including values 10/11/13/15/20/75 of E-24 series, 3 digits
Fig. 3 Value = 12.4 kΩ
RT0805 / RT1206 / RT1210 / RT2010 / RT2512
Either resistance in E-24 or E-96: 4 digits
00
First three digits for significant figure and 4th digit for number of zeros
Fig. 4 Value = 10 kΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
OU
UTTLLIIN
NEESS
O
The resistors are constructed out of a high-grade ceramic

body. Internal metal electrodes are added at each end and connected by a resistive layer. The resistive layer is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 5.
DIMENSION Table 1 For outlines see fig. 5 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RT0100 0.40±0.02 0.20±0.02 0.13±0.02 0.10±0.03 0.10±0.03 RT0201 0.60 ±0.03 0.30 ±0.03 0.23 ±0.03 0.10 ±0.05 0.15 ±0.05 RT0402 1.00 ±0.10 0.50 ±0.05 0.30 ±0.05 0.20 ±0.10 0.25 ±0.10 RT0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RT0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 RT1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 RT1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20 RT2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 RT2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
Page 5

ELECTRICAL CHARACTERISTICS
Table 2
Max.
Operating
Max.
Power
T.C.R.
Work
Temperature
Overload
TYPE
Rating
(ppm/°C)
Range
Vol. Vol. (1)
±0.01% ±0.02%
–55°C
--- ---
±50
to 1/32W 15V 30V
RT0100
--- ---
±25
+125°C
--- ---
±50 --- ---
±25
–55°C
--- ---
to 1/20W 25V 50V
±15
RT0201
--- ---
+125°C
±10 --- ---
±5 ±50 50.1~12K 50.1~12K ±25 50.1~12K 50.1~12K ±15 20~12K 20~12K
1/16W 50V 100V
RT0402
±10 20~12K 20~12K ±5 20~10K 20~10K ±50 50.1~30K 50.1~30K ±25 50.1~30K 50.1~30K
Resistance Range (E-24/E-96 series)(2) & Tolerance
Unit weight (mg/pcs)
±0.05% ±0.1%
±0.25% ±0.5% ±1.0%
--- 50R~5K 50R~5K 50R~5K 50R~5K
0.037
--- 50R~5K 50R~5K 50R~5K 50R~5K --- 22~75K 22~75K 22~75K 22~75K --- 22~75K 22~75K 22~75K 22~75K ---
22~5K ---
---
22~5K
0.169
---
--- ---
22~5K 22~5K
--- --- --- --- ---
20~12K 4.7~500K 4.7~500K 4.7~500K 4.7~500K 20~12K 4.7~240K 4.7~240K 4.7~240K 4.7~240K 20~12K 20~200K 20~200K ---
--- 0.564
20~12K 20~200K 20~200K ---
---
20~10K 20~10K 20~10K ---
---
4.7~100K 1~2M
1~2M 1~2M 1~2M
4.7~100K 1~1M
1~1M 1~1M 1~1M
±15 50.1~100K 50.1~100K 4.7~100K
4.7~680K 4.7~680K ---
--- 2.128
1/10W 75V 150V
RT0603
±10 50.1~100K 50.1~100K 4.7~100K
–55°C
±5 20~30K 20~30K
to
±50 50.1~30K 50.1~30K
+155°C
±25 50.1~30K 50.1~30K
4.7~680K 4.7~680K ---
---
20~30K 20~30K 20~30K ---
---
4.7~200K 1~3M
1~3M 1~3M 1~3M
4.7~200K 1~1.5M 1~1.5M 1~1.5M 1~1.5M
±15 50.1~200K 50.1~200K 4.7~200K
--- ---
4.7~1M 4.7~1M
4.642
1/8W 150V 300V
RT0805
±10 50.1~200K 50.1~200K 4.7~200K
4.7~1M 4.7~1M ---
---
20~50K 20~50K 20~50K ---
---
±5 20~50K 20~50K ±50 50.1~30K 50.1~30K
5.6~500K 1~3M
1~3M 1~3M 1~3M
±25 50.1~30K 50.1~30K
5.6~500K 1~1.5M 1~1.5M 1~1.5M 1~1.5M
±15 50.1~500K 50.1~500K 5.6~500K
5.6~1.5M 5.6~1.5M ---
--- 9.996
1/4W 200V 400V
RT1206
±10 50.1~500K 50.1~500K 5.6~500K ±5 20~100K 20~100K --- ---
±50 --- ---
±25 --- ---
1/4W 200V 400V
RT1210
±15 --- ---
±10 --- ---
±5 --- ---
±50 --- ---
±25 --- ---
1/2W 200V 400V
RT2010
±15
–55°C
--- ---
to
±10 --- ---
+125°C
±5 --- ---
±50 --- ---
±25 --- ---
3/4W 200V 400V
±15 --- ---
±10
RT2512
--- ---
±5 --- ---
±50
1W 200V 400V
--- ---
±25
NOTE
5.6~1.5M 5.6~1.5M ---
---
20~100K 20~100K 20~100K ---
---
4.7~1M 4.7~1M 4.7~1M 4.7~1M 4.7~1M
4.7~1M 4.7~1M 4.7~1M 4.7~1M 4.7~1M 100~100K 4.7~100K 4.7~100K ---
--- 16.370
100~100K 4.7~100K 4.7~100K ---
---
--- --- --- --- ---
4.7~1M 4.7~1M 4.7~1M 4.7~1M 4.7~1M
4.7~1M 4.7~1M 4.7~1M 4.7~1M 4.7~1M 100~100K 4.7~100K 4.7~100K ---
--- 25.011
4.7~100K ---
---
100~100K 4.7~100K --- --- --- --- ---
4.7~1M 4.7~1M 4.7~1M 4.7~1M 4.7~1M
4.7~1M 4.7~1M 4.7~1M 4.7~1M 4.7~1M
4.7~100K ---
---
100~100K 4.7~100K 100~100K 4.7~100K 4.7~100K ---
--- 40.351
--- --- --- --- ---
10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M 10Ω~1M
- The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8” 2. Value of E-192 series is on request
Page 6

FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity
REEL RT0100 RT0201 RT0402 RT0603 RT0805 RT1206 RT1210 RT2010 RT2512
PACKING STYLE
DIMENSION
Paper/PE taping reel (R)
7" (178 mm) 10,000 10,000
20,000 20,000
10" (254 mm) 13" (330 mm) 50,000 50,000
Embossed taping reel (K)
--- ---
7" (178 mm)
NOTE
10,000 5,000 5,000 5,000 5,000
--- ---
20,000 10,000 10,000 10,000 10,000
--- ---
50,000 20,000 20,000 20,000 20,000
--- ---
--- --- --- --- --- 4,000 4,000
- For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION

PPO OW
WEERR RRA
ATTIIN
NG G
Each type rated power at 70°C: RT0100=1/32W RT0201=1/20W, RT0402=1/16W, RT0603=1/10W, RT0805=1/8W, RT1206=1/4W, RT1210=1/4W, RT2010=1/2W, RT2512=3/4W, 1W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula:
V= (PxR ) or max. working voltage whichever is less
Where
V=Continuous rated DC or AC (rms) working voltage (V)
P=Rated power (W)
R=Resistance value (Ω)
Page 7

TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
Temperature
MIL-STD-202 Method 304
At +25/–55 °C and +25/+125 °C
Coefficient of Resistance
Formula:
(T.C.R.)
R2–R1 T.C.R= ------------------------- ×106 (ppm/°C) R1(t2–t1)
Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Life/Endurance IEC 60115-1 4.25.1
At 70±5 °C for 1,000 hours, rated voltage applied
MIL-STD-202 Method 108A for 1.5 hours on, 0.5 hour off, still air required
High
IEC 60068-2-2
1000 hours at maximum operating temperature
Temperature
depending on specification, unpowered
Exposure
Moisture
MIL-STD-202 Method 106G Each temperature / humidity cycle is defined at 8
Resistance
hours, 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion
Thermal Shock MIL-STD-202 Method 107G -55/+125 °C
Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air
Humidity
IEC 60115-1 4.24.2
Steady state for 1000 hours at 40 °C / 95% R.H.
(steady state)
rated voltage applied for 1.5 hours on and 0.5 hour off
REQUIREMENTS
Refer to table 2
±(0.5%+0.05 Ω)
±(0.5%+0.05 Ω)
±(0.5%+0.05 Ω)
±(0.5%+0.05 Ω)
±(0.5%+0.05 Ω)
Page 8

TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
2.5 times of rated voltage or maximum
Short Time Overload IEC60115-1 4.13
±(0.5%+0.05 Ω)
overload voltage whichever is less for 5 sec at
No visible damage
room temperature
Chips mounted on a glass epoxy resin PCB
Board Flex/
IEC 60115-1 4.33
Bending
(FR4) Bending: see table 5 for each size Bending time: 60±5 seconds
Solderability
Electrical Test not required
- Wetting
J-STD-002 test B
Magnification 50X SMD conditions:
±(0.25%+0.05 Ω) No visible damage RT0100±(0.5%+0.05 Ω)
Well tinned (≥95% covered) No visible damage
1st step: method B, aging 4 hours at 155°C dry heat 2nd step: leadfree solder bath at 245±3°C Dipping time: 3±0.5 seconds
- Leaching
J-STD-002 test D
Leadfree solder, 260 °C, 30 seconds immersion time
- Resistance to IEC 60115-1 4.18
Condition B, no pre-heat of samples.
Soldering Heat
Leadfree solder, 260 °C, 10 seconds immersion time
No visible damage
±(0.5%+0.05 Ω) No visible damage
Procedure 2 for SMD: devices fluxed and cleaned with isopropanol
Table 5 Bending for sizes 0100 to 2512
RT0805 RT1206 RT1210 RT2010 RT2512
TYPE
RT0100 RT0201 RT0402 RT0603
Specification (mm)
5 5 5 3 3 2 2 2 2
Page 9

REVISION HISTORY
CHANGE NOTIFICATION DESCRIPTION
REVISION DATE
Version 14 Nov 23 2022 -
Version 13 July 07, 2022 -
Version 12 Apr. 21, 2020 -
-
Version 11 July 2, 2019
-
Version 10 Jun. 12, 2019
Version 9 Sep. 12, 2017 -
Version 8 May 31, 2017 -
Version 7 Jan. 17, 2017 -
Version 6 May. 11, 2015 -
Version 5 Aug. 22, 2014 -
Version 4 Oct 21, 2009 -
Version 3 Jul 11, 2008 -
Version 2 Dec 26, 2005 -
- Add unit weight information
- RT0402/RT0603/RT0805/RT1206 Extend resistor range - Add RT0100
- Modified resistance range
- Add 1W for 2512
- Extend resistor value
- Add ±0.02% tol. for 0402 to 1206
- Add 10" packing
- Add ±0.01% tol. for 0402 to 1206
- Extend resistor value
- Add RT0201 - RT0402/0603/0805/1206: resistance range and operating temperature range updated - Fig. 6 updated
- Test Items and methods updated - Test requirements upgraded
- Change to dual brand datasheet that describe RT0402 to RT2512 with RoHS compliant - Description of "Halogen Free Epoxy" added - Define global part number - Modify electrical characteristic
- New datasheet for thin film high precision - high stability chip resistors sizes of 0201/0402/0603/0805/1206/1210/2010/2512, 1%, 0.5%, 0.25%, 0.1%, 0.05%, TC25/50 with lead-free terminations - Replace the 0402 to 1210 parts of pdf files: TFx10_1_1, TFx11_.5_2, TFx12_.25_2, TFx13_.1_3, TFx14_.05_1, TFx20_1_2, TFx21_.5_2, TFx22_.25_2, TFx23_.1_2, TFx24_.05_1, and combine into a document. - Test method and procedure updated - PE tape added (paper tape will be replaced by PE tape)
“ YAGEO reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”