RSX-5 TEMEX
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
Excellent shock and vibration performance Low aging Very good short term stability Specifications ----- 1.0 SPECIFICATION REFERENCES Line Parameter
Description
1.1 Model description RSX-5 1.2 RoHS compliant Yes 1.3 Reference number 1.4 Rakon part number ----- 2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Frequency 12 to 40 MHz 2.2 Calibration tolerance Frequency at 25°C ±2°C and specified load capacitance ±5 to 25 ppm 2.3 Reflow shift Two consecutive reflow as per attached profile after 4 hours recovery at 25°C ±1 max ppm 2.4 Frequency stability over temperature Referenced to frequency reading at 25˚C and the specified load capacitance ±5 to 50 ppm 2.5 Temperature range Operating temperature -55 to 105 2.6 Frequency perturbations Peak-to-peak deviation from the frequency versus temperature curve fit. Minimum of 1 frequency reading every 3˚C over operating temperature range 0.1 to 1 ppm 2.7 Static temperature hysteresis Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25˚C ±0.4 max ppm 2.8 Long term stability Frequency drift over 1 year at 25°C ±1 max ppm 2.9 g Sensitivity Gamma vector of all three axes from 30Hz to 1500Hz 2 max ppb/g ----- Page 1
3.0 ELECTRICAL Line Parameter Test Condition Value Unit 3.1 Load capacitance (CL) Frequency is calibrated to a load at room temperature. 5 to 50 pF 3.2 Shunt capacitance (C0) Operating specification 3 max pF 3.3 Pullability 3 min ppm/pF 3.4 Drive level Operating specification 100 max µW 3.5 Equivalent series resistance (ESR). Fundamental 40 max Ω 3.6 Insulation resistance (IR) 100V ±15V at 25°C 500 min MΩ ----- 4.0 ENVIRONMENTAL Line Parameter 4.1 Shock Half sine-wave acceleration of 100g peak amplitude for 11ms duration, 3 cycles in each plane 4.2 Humidity After 48 hours at 85˚C 85% relative humidity non-condensing 4.3 Thermal shock Exposed at -40˚C for 30 minutes then to 85˚C for 30 minutes constantly for a period of 5 days. 4.4 Vibration 10g RMS 30Hz to 1500Hz duration of 6 hours. 4.5 Storage temperature -55 to 105˚C ----- 5.0 MANUFACTURING INFORMATION Line Parameter 5.1 Reflow Able to withstand solder reflow process 5.2 Packaging description Tape and Reel. 2000pc per reel standard. Refer to drawing for details ----- 6.0 MARKING Line Parameter 6.1 Type Laser engraved 6.2 Line 1 R and frequency in MHz [XX.XX] 6.3 Line 2 Pin 1 mark and Date code Page 2
Drawing Name: RSX-5 Model Drawing Page 3
Drawing Name: RSX-5/RGX-5 Series Tape & Reel Page 4
Drawing Name: RSX/RGX Crystals Pb-free Reflow Page 5