RS1 ITT

Document overview

  • PDF pages: 1

Technical content

Page 1

RS1 and RS2 Rocker Switch Modules

PDF page 1 diagram
PDF page 1 diagram

The two rocker switch modules RS1

Technical data

and RS2 are designed to be installed

2 types

RS1 with two K12 switches

into equipment, panels, multi-function

RS2 with four K12 switches

grips or other switching units.

Dimensions (length, width, height)

RS1

Material

This module has 2 functions consisting of two directional movements.

Connections Main features of K12

RS2 With the RS2 a double switch function is

Function

available in each of the two directions. Proven applications of the RS2 include car windows, machine control units and locomotives.

Operating life Operating temperature

The rocker switch modules consist of

Storage temperature

O RS1: 2 K12 switches

Protection class

RS2: 4 K12 switches O Rocker

Graphics on the labels

O PC board

RS1: 43 3 40 3 27 mm RS2: 43 3 41 3 30 mm

Button

PBT

Housing and Rocker

PC/ASA-Blend Connectors soldered, screwed or plugged in Tactile feedback, positive snap-point (further details of the K12 key switch see K12 section)

RS1

1 make contact per direction (two functions maximum)

RS2

2 make contacts per direction (four functions maximum) ^ 106 operations – 25°C to + 85°C – 40°C to + 85°C With sealing: IP 67 acc. to DIN/IEC 529. Dust tight and protected against the effects of immersion in water in the button area. Upon request

The rocker switch modules as standard version are also sold in small quantities.

The button of the rocker switch can be

For further technical details and specific applications,

designed according to customer’s

please contact ITT Cannon Switch Products.

requirements. The available button KRSA can be delivered separately or mounted.

PDF page 1 diagram

In the drawing, you’ll find a standard PC board with respective dimensions. According to the design IP 67 according to DIN/ISO 529 is possible (dust tight and protected against the effects of immersion in water). Also, the graphics on the labels of the rocker switch modules can be designed according to customer’s requirement. Standard graphics with arrows are available: see above photo.

Ordering code Example: 1
RS1
1 Designation: RS1, RS2 (button mounted)

E-7