DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

PLUTO+™ LOW ACCELERATION SENSITIVITY VC‐TCXO www.rakon.com sales@rakon.com Page 1 of 2 RPT7050G RPT7050G uses Rakon's proprietary Pluto+™ ASIC, and a patented dual crystal resonator design, resulting in high frequency stability over a wide temperature range, paired with a better than 0.2ppb/g acceleration sensitivity. Standard Specifications Parameter Min. Typ. Max. Unit Test Condition / Description Nominal frequency 16 40 MHz Frequency calibration ±1 ppm At 25°C±2°C, at time of shipment reference to nominal frequency Reflow shift ±1 ppm After 1 hour recovery at 25°C Operating temperature range ‐ 40 85 °C Operating temperature range over which temperature stability is measured Slope over temperature (ΔF/ΔT) 20 200 ppb/°C Temperature ramp 1°C/minute Supply voltage stability ±0.1 ppm ±5% variation Load sensitivity ±0.1 ppm ±5% variation Long term stability (≤26MHz) ±1 ppm ppm 1 year 10 years Long term stability (>26MHz) ±2 ppm ppm 1 year 10 years Acceleration sensitivity 0.2 0.5 ppb/g Gamma vector over operating temperature range Supply voltage, VCC Current (C/Sine) Current (HCMOS) 2.5 2.5 6 V mA mA ±5%, standard values are 3.0, 3.3 and 5.0V Output voltage – C/Sine Load resistance Load capacitance 0.8 V kΩ pF Peak to peak voltage Output voltage (HCMOS) Voltage level low (VOL) Voltage level high (VOH) Rise and fall time Duty cycle Load 0.9 0.1 Vs Vs ns pF Measured with Vcc = 3.3V Measured at 50% level Control voltage range 0.5 2.5 V Vc Frequency tuning ≤26MHz >26MHz ppm ppm Slope +7 ppm/V Input resistance 100 kΩ Modulation bandwidth 1 Hz Features Applications 7.0 x 5.0 x 1.8 mm  g‐sensitivity typically ≤0.2ppb/g  Excellent frequency stability over temperature performance  Extended operating temperature up to ‐55/105°C  Variants tailored to specific customer requirements  Precision GNSS/Positioning  Real Time Kinematic (RTK)  Avionics  Communications

PLUTO+™ LOW ACCELERATION SENSITIVITY VC‐TCXO www.rakon.com sales@rakon.com Page 2 of 2 Environmental Specifications Parameter Description Vibration IEC 60068‐2‐6, test Fc: 10‐60Hz 0.75mm displacement, 60 – 500Hz 200m/s2 (20gn) acceleration, 1.5 hours in each of three mutually perpendicular axes at 1 octave per minute. Mechanical shock IEC 60068‐2‐27, test Ea: 1500gn acceleration for 0.5ms duration, Half‐sine pulse, 3 shocks in each direction along three mutually perpendicular axes. SSB Phase Noise (Typical value at 25°C) Model Outline and Recommended Pad Layout RMS Jitter = 290fs (12kHz ~ 5MHz)