DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

PLUTO+ ™ ULTRA STABLE SMD TCXO | STRATUM 3 / IEEE 1588 / SYNCE www.rakon.com sales@rakon.com Page 1 of 2 RPT5032J The RPT5032J uses Rakon's new patented, Pluto+ ASIC. Pluto+ advances on the world famous, ‘best‐in‐class’ Pluto ASIC technology by providing enhanced frequency versus temperature stability. It also delivers to the industry the lowest jitter achievable from an ultra‐stable Standard Specifications Parameter Min. Typ. Max. Unit Test Condition / Description Nominal frequency 10 – 40 MHz Standard frequencies: 10, 12.8, 16.384, 19.44, 20, 20.48, 24.576, 25, 30.72, 38.88 and 40MHz Operating temperature range ‐ 40 85 °C Holdover stability, variable temperature ±100 – ±280 ppb The default reference for holdover stability, variable temperature is (Fmax + Fmin)/2 Holdover stability, constant temperature ±10 – ±40 ppb ±10ppb after 10 days of continuous operation, ±40ppb after 48 hours of continuous operation Slope over temperature (ΔF/ΔT) ±20 – ±100 ppb/°C Free‐run accuracy ±4.6 ppm Inclusive of calibration tolerance at 25°C, temperature, supply voltage variation ±5%, load variation ±5pF, reflow soldering and 20 years ageing reference to the nominal frequency Wander generation TDEV / MTIE TDEV compliant with GR‐1244 fig 5‐4, G.812 types II & III fig 2, G.813, G.8262 MTIE compliant with GR‐1244 Fig 5‐5, G.812 types II & III fig 1, G.813, G.8262 Supply voltage stability ±0.025 ppm ±5% variation, reference to frequency at nominal supply voltage Acceleration stability < 2 ppb/g Gamma vector, 3‐axes, 30‐1500Hz Start‐up time 5 – 15 ms 90% amplitude Root Allan Variance 5 10‐11 tau = 1.0s Supply voltage, VCC 3.3 V ±5% Supply current 3 6 mA Depending on nominal frequency Oscillator output – HCMOS Output voltage level high (VOH) Output voltage level low (VOL) Duty cycle Rise & fall time Load 0.9VCC 0.1V CC V V ns pF LVCMOS & LVTTL compatible as per JESD8C At 50% level Between 10% and 90% Tri‐state control Input level low (pin 6) Input level high (pin 6) 0.6VCC 0.2VCC V V Device disabled, output in high impedance state Device enabled, operating Features Applications 5.0 x 3.2 mm  Best in class frequency versus temperature  RMS phase jitter down to 0.13ps  Phase noise < ‐160dBc/Hz floor  Excellent holdover stability  Stratum 3 / IEEE 1588 / SyncE  SONET / SDH / WDM / OTN  Carrier Ethernet / Microwave  Backhaul / Transport Equipment

PLUTO+ ™ ULTRA STABLE SMD TCXO | STRATUM 3 / IEEE 1588 / SYNCE www.rakon.com sales@rakon.com Page 2 of 2 SSB Phase Noise (Typical value at 25°C) Model Outline and Recommended Pad Layout (6 Pad) Model Outline and Recommended Pad Layout (10 Pad version coming soon) RMS Jitter = 190 fs (12 kHz ~ 5 MHz) RMS Jitter = 290 fs (12 kHz ~ 5 MHz)