RMPT10BD SCHNEIDER
Document overview
- PDF pages: 6
Technical content
Page 1
Harmony Analog, Converter for Universal
Characteristics
Pt100 probes, temperature transmitter, 40...40
°C/40...104 °F
Product availability : Non-Stock - Not normally stocked in distribution facility
Price\* : 141.00 USD

Main
Range of product
Harmony Analog Converter for Universal Pt100 probes
Product or Component Type
Temperature probe - 40...40 °C/- 40...104 °F Pt 100 2, 3 or 4 wires
Analogue input type Analogue output type
Current 0...20 mA <= 500 Ohm Current 4...20 mA <= 500 Ohm Voltage 0...10 V >= 100 kOhm
Complementary
Overvoltage protection on output (+/- 30 V)
Protection Type
Reverse polarity protection on output Short-circuit protection on output Reverse polarity protection on power supply -15...-11 V no input or input wire broken
Abnormal analogue output voltage
11...15 V no input or input wire broken -30…0 mA no input or input wire broken
Abnormal analogue output current
22…30 mA no input or input wire broken
[Us] Rated Supply Voltage
24 V DC non isolated +/- 20 %
Current consumption
<= 40 mA voltage output <= 60 mA current output
Local signalling
for power ON LED (green) +/- 0.5 % of full scale 3 or 4 wires)20 °C
Measurement error
+/- 1 % of full scale 2 wires)20 °C +/- 10 % of full scale20 °C electromagnetic interference of 10 V/m)
Repeat accuracy
+/- 0.2 % full scale 20 °C +/- 0.6 % full scale 60 °C
Temperature Coefficient
150 ppm/°C
Maximum wiring resistance
0.2 Ohm 2 wires
\* Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price. Sep 13, 2021
Page 2
Clamping Connection Capacity
1 x 2.5 mm² 2 x 1.5 mm²
Tightening torque
5.31…9.74 lbf.in (0.6…1.1 N.m)
Marking
CE
Surge withstand
0.5 kV 1.2/50 µs IEC 61000-4-5
[Ui] rated insulation voltage
2000 V
Fixing mode
By screws mounting plate) Clip-on 35 mm symmetrical DIN rail)
Safety reliability data
B10d = 30437 MTTFd = 32.9 years
Product Weight
0.26 lb(US) (0.12 kg)
Environment
Electrostatic discharge - test level: 6 kV level 3 (contact discharge) conforming to IEC 61000-4-2
Electromagnetic compatibility
Electrostatic discharge - test level: 8 kV level 3 (air discharge) conforming to IEC 61000-4-2
Standards
DIN 43760 EN/IEC 60584-1 EN/IEC 60947-1 EN/IEC 60751
Product Certifications
UL GL CSA
IP degree of protection
IP20 (terminal block) IP50 housing)
Fire resistance
1562 °F (850 °C) IEC 60695-2-1 1562 °F (850 °C) UL
Shock resistance
50 gn 11 ms IEC 60068-2-27
Vibration resistance
5 gn 10…100 Hz)IEC 60068-2-6
Resistance to fast transients
1 kV IEC 61000-4-4 on input-output) 2 kV IEC 61000-4-4 on power supply)
Disturbance radiated/conducted
CISPR 11 CISPR 22 group 1 - class B
Ambient Air Temperature for Storage
-40…185 °F (-40…85 °C) 32…122 °F (0…50 °C) mounting side by side
Ambient Air Temperature for Operation
32…140 °F (0…60 °C) 2 cm spacing
Pollution degree
2 IEC 60664-1
Ordering and shipping details
22375 - INTERFACE MODULE(ABA,R,S)
Category Discount Schedule
CP2
GTIN
3389110108927
Nbr. of units in pkg.
1
Package weight(Lbs)
4.41 oz (125 g)
Returnability
No
Country of origin
ID
Packing Units
Unit Type of Package 1
PCE
Package 1 Height
1.06 in (2.7 cm)
Package 1 width
3.23 in (8.2 cm)
Package 1 Length
3.35 in (8.5 cm)
Unit Type of Package 2
S02
Number of Units in Package 2 Package 2 Weight
13.96 lb(US) (6.33 kg)
Package 2 Height
5.91 in (15 cm)
Package 2 width
11.81 in (30 cm)
Page 3
Package 2 Length
15.75 in (40 cm)
Offer Sustainability
Sustainable offer status
Green Premium product WARNING: This product can expose you to chemicals including: Nickel compounds, which is known
California proposition 65
to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
REACh Regulation
REACh Declaration Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Directive
EU RoHS Declaration
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
China RoHS declaration
Environmental Disclosure
Product Environmental Profile
Circularity Profile
End of Life Information The product must be disposed on European Union markets following specific waste collection and
WEEE
never end up in rubbish bins.
Contractual warranty
Warranty
18 months
Page 4
Dimensions Drawings
Analog Interface (Converter)
Dimensions

(1) Terminal block AB1TP435U or AB1RRNTP435U2
Page 5
Mounting and Clearance
Mounting
Mounting on Rails AM1•••••

Panel Mounting

Page 6
Connections and Schema
Analog Interface: Converter for Universal Pt100 Probe
Wiring Diagram

The input, output and power supply lines must be kept away from the power cables to avoid effects due to induced interference. The input and output cables must be shielded as indicated in the schemes and must be kept away from each other.
Input Connections
2-wire type

RL1 + RL2 ≤ 200 mΩ
3-wire type

RL1 = RL2 = RL3 RL1 + RL2 ≥ 200 Ω
4-wire type
RL1 + RL2 ≤ 200 Ω