RL0402FR-070R1L YAGEO
Document overview
- PDF pages: 9
Technical content
Page 1

DATA SHEET
LOW OHMIC CHIP RESISTORS
RL series 5%, 2%, 1% sizes 0402/0603/0805/1206/ 1210/1218/2010/2512
RoHS compliant & Halogen Free
Page 2

ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
SCOPE
Both part numbers are identified by the series, size, tolerance, packing
This specification describes
type, temperature coefficient, taping reel and resistance value.
RL0402 to RL2512 low ohmic chip resistors with lead-free terminations
D oorrddeerriinngg ccooddee
YYA AG
GEEO
O BBRRA
AN ND
made by thick film process.
GLOBAL PART NUMBER (PREFERRED)
RL XXXX X X X XX XXXX L
APPLICATIONS
(1) (2) (3) (4) (5) (6) (7)
Converters
(1) SIZE
Printer equipment
0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
Server board Telecom
(2) TOLERANCE
Consumer
F = ±1%
Car electronics
G = ±2% J = ±5%
FEATURES
"-" = Jumper ordering
AEC-Q200 qualified
(3) PACKAGING TYPE
Halogen Free Epoxy
R = Paper taping reel
K = Embossed taping reel
RoHS compliant
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
Hazardous wastes
– = Based on spec
High component and equipment reliability
(5) TAPING REEL
Saving of PCB space
07 = 7 inch dia. Reel and standard power
Non-forbidden materials used
13 = 13 inch dia. Reel and standard power
in products/production
7W = 7 inch dia. Reel and 2 x standard power (0805 and 1206)
Low resistances applied to
(6) RESISTANCE VALUE
current sensing
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point.
MSL Class: MSL 1
Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”.
(7) DEFAULT CODE Letter L is system default code for order only (Note)
Resistance rule of global part number Resistance code rule
0RXXX (1 to 976 mΩ)
XRXX (1 to 9.76 Ω)
XXRX (10 to 97.6 Ω)
XXXR (100 to 976 Ω)
XKXX (1 to 9.76 KΩ)
XMXX (1 to 9.76 MΩ)
ORDERING EXAMPLE
Example
The ordering code of a RL0603 chip resistor, value 0.56Ω with
0R1 = 0.1 Ω 0R12 = 0.12 Ω
±1% tolerance, supplied in 7-inch
0R105 = 0.105 Ω
tape reel is: RL0603FR-070R56L.
1R = 1 Ω 1R5 = 1.5 Ω
NOTE
9R76 = 9.76 Ω
- All our R-Chip products meet RoHS
10R = 10 Ω
compliant and Halogen Free. "LFP" of
97R6 = 97.6 Ω
the internal 2D reel label mentions "Lead Free Process"
100R = 100 Ω
- On customized label, "LFP" or specific symbol can be printed
1K = 1,000 Ω 9K76 = 9760 Ω
1M = 1,000,000 Ω 9M76= 9,760,000 Ω
Page 3

PPH
HYYC
CO OM
MPP BBRRA
AN ND D oorrddeerriinngg ccooddeess
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp brand products.
GLOBAL PART NUMBER (PREFERRED)
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2350 / 2390 / 2322 XXX XXXXX L
(1) (2) (3) (4)
EMBOSSED (2) PAPER/PE (2)
START TOL.RESISTANCE
TAPE ON REEL TAPE ON REEL (units)
SIZE TYPE
IN (1) (%) RANGE
4,000
5,000
10,000
0402 LRC31 2350 ±5% 0.05 to 1 Ω
-
- 513 20xxx
LRC32 2350 ±1% 0.05 to 1 Ω
-
- 513 22xxx
0603 LRC21 2350 ±5% 0.01 to 1 Ω
-
512 10xxx
-
LRC22 2350 ±1% 0.01 to 1 Ω
-
512 12xxx
-
0805 LRC11 2350 ±5% 0.01 to 1 Ω
-
511 10xxx
-
LRC12 2350 ±1% 0.01 to 1 Ω
-
511 12xxx
-
LRC11P 2350 ±1% 0.01 to 1 Ω
-
511 15xxx
-
LRC12P 2350 ±5% 0.01 to 1 Ω
-
511 17xxx
-
1206 LRC01 2350 ±5% 0.01 to 1 Ω
-
510 10xxx
-
LRC02 2350 ±1% 0.01 to 1 Ω
-
510 12xxx
-
LRC01P 2350 ±1% 0.01 to 1 Ω
-
519 01xxx
-
LRC02P 2350 ±5% 0.01 to 1 Ω
-
519 1xxxx
-
1210 LPRC101 2390 ±5% 0.01 to 0.0976 Ω -
735 90xxx
-
LPRC101 2390 ±5% 0.1 to 1 Ω
-
735 60xxx
-
LPRC102 2390 ±1% 0.01 to 1 Ω
-
735 3xxxx
-
1218 LPRC201 2322 ±5% 0.01 to 1 Ω
735 64xxx
-
-
LPRC201 2322 ±1% 0.01 to 1 Ω
735 7xxxx
-
-
2010 LPRC111 2322 ±5% 0.01 to 0.0976 Ω 760 90xxx
-
-
LPRC111 2322 ±5% 0.1 to 1 Ω
760 60xxx
-
-
LPRC111 2322 ±1% 0.01 to 0.0976 Ω 761 90xxx
-
-
LPRC111 2322 ±1% 0.1 to 1 Ω
761 6xxxx
-
-
2512 LPRC221 2322 ±5% 0.01 to 0.0976 Ω 762 90xxx
-
-
LPRC221 2322 ±5% 0.1 to 1 Ω
762 60xxx
-
-
LPRC221 2322 ±1% 0.01 to 0.0976 Ω 763 90xxx
-
-
LPRC221 2322 ±1% 0.1 to 1 Ω
763 6xxxx
-
-
(1) The resistors have a 12-digit ordering code starting with 2350/2390/2322. (2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In 12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is requested in Global part number ordering code.) (3) The remaining 4 or 3 digits represent the resistance value with the last digit indicating the multiplier as shown in the table of “Last digit of 12NC”. (4) Letter L is system default code for order only (Note).
Last digit of 12NC Resistance decade (3)
Last digit
0.01 to 0.0976Ω
0
0.1 to 0.976Ω
7
1 to 9.76Ω
8
10 to 97.6Ω
9
100 to 976Ω
1
1 to 9.76 kΩ
2
10 to 97.6 kΩ
3
100 to 976 kΩ
4
1 to 9.76 MΩ
5
10 to 97.6 MΩ
6
Example: 0.02Ω = 0200 or 200 0.3Ω = 3007 or 307 1Ω = 1008 or 108 33 kΩ = 3303 or 333 10 MΩ = 1006 or 106
ORDERING EXAMPLE
The ordering code of a RL0603 chip resistor, value 0.56 Ω with ±1% tolerance, supplied in tape of 5,000 units per reel is: 235051212567L or RL0603FR-070R56L.
NOTE
- All our R-Chip products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process" 2. On customized label, "LFP" or specific symbol can be printed
Page 4

MARKING RL0402 / RL0603: R<100 mΩ EXCEPT 10/20/30/40/50/60 mΩ
No marking
Fig. 1
RL0603: R≥100 mΩ, R = 10/20/30/40/50/60 mΩ
E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ):3 digits
The “R” is used as a decimal point; the other 2 digits are significant.
Fig. 2 Value = 220 mΩ
RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512
E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ): 4 digits
The “R” is used as a decimal point; the other 3 digits are significant.
Fig. 3 Value = 20 mΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION The resistors are constructed out of a high-grade ceramic
OU
UTTLLIIN
NEESS
O

body. Internal metal electrodes are added at each end and connected by a resistive paste. The composition of the paste is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 4.
DIMENSIONS Table 1 For outlines see fig. 4 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RL0402 1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10 RL0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RL0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 RL1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20 RL1210 3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20 RL1218 3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25 RL2010 5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20 RL2512 6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
Page 5

ELECTRICAL CHARACTERISTICS
Table 2
Power Operating Temp.
T. C. R.
Resistance range & tolerance
Type
range
P70
RL0402
1/16W
-55°C to +155°C
RL0603
1/10W
1/8W
RL0805
-55°C to +125°C 1/4W
-55°C to +155°C 1/4W
RL1206
E24 ±1%, ±2%, ±5%
-55°C to +125°C 1/2W
RL1210
1/2W
RL1218
1W -55°C to +155°C
RL2010
3/4W
RL2512
1W
TYPE / RESISTANCE
RANGE
50mΩ ≤R<100mΩ
RL0402 50mΩ≤R<1Ω
±1000 ppm/°C
10mΩ ≤R≤36mΩ
36mΩ <R≤91mΩ
RL0603 10mΩ≤R<1Ω
±1,500 ppm/°C
±1,200 ppm/°C
Jumper criteria
( ppm/°C)
Max. resistance 20mΩ
50mΩ ≤ R < 1Ω
Rated current 1.5A Max. resistance 20mΩ
10mΩ ≤ R < 1Ω
Rated current 2A Max. resistance 20mΩ
10mΩ ≤ R < 1Ω
Rated current 2.5A
10mΩ ≤ R < 1Ω
-- --
Max. resistance 20mΩ
10mΩ ≤ R < 1Ω
Rated current 3.5A
See following table “T.C.R.- RL series”
10mΩ ≤ R < 1Ω
-- --
10mΩ ≤ R < 1Ω
-- --
10mΩ ≤ R < 1Ω
-- --
10mΩ ≤ R < 1Ω
-- --
10mΩ ≤ R < 1Ω
-- --
TEMPERATURE COEFFICIENT
OF RESISTANCE
100mΩ ≤R<500mΩ
500mΩ ≤R<1Ω
±800 ppm/°C
±300 ppm/°C
91mΩ <R≤500mΩ
500mΩ <R<1Ω
±800 ppm/°C
±300 ppm/°C
10mΩ ≤R≤18mΩ 18mΩ <R≤47mΩ 47mΩ <R≤91mΩ 91mΩ <R≤360mΩ 360mΩ <R<500mΩ
500mΩ ≤R<1Ω
RL0805
±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
10mΩ ≤R≤18mΩ 18mΩ <R≤47mΩ 47mΩ <R≤91mΩ 91mΩ <R≤360mΩ 360mΩ <R≤500mΩ
500mΩ <R<1Ω
RL1206 10mΩ≤R<1Ω ±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
RL1210
±1,500 ppm/°C ±1,000 ppm/°C
±800 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
RL2010
±1,500 ppm/°C ±1,200 ppm/°C ±1,000 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
RL2512
±1,500 ppm/°C ±1,200 ppm/°C
±800 ppm/°C
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
10mΩ ≤R≤30mΩ
30mΩ <R≤56mΩ
56mΩ <R≤180mΩ
180mΩ <R<1Ω
RL1218 10mΩ≤R<1Ω
±2,000 ppm/°C
±1,000 ppm/°C
±700 ppm/°C
±250 ppm/°C
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL DIMENSION RL0402 RL0603
Paper taping reel (R)
7" (178 mm) 10,000 5,000
13" (330 mm) 50,000 20,000
Embossed taping reel (K)
7" (178 mm)
---
NOTE
RL0805 RL1206 RL1210 RL1218 RL2010 RL2512
5,000 5,000 5,000
--- --- ---
20,000 20,000 20,000
--- --- ---
--- --- --- --- 4,000 4,000 4,000
- For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
Page 6

FUNCTIONAL DESCRIPTION

OPPEERRA
O ATTIIN
NG
GTTEEM
MPPEERRA
ATTU
URREE RRA
AN NG GEE
Normal Power: Range: –55 °C to +155 °C (Fig. 5) Double Power: Range: –55 °C to +125 °C (Fig. 6)
PPO OW
WEERR RRA
ATTIIN
NG G
Each type rated power at 70 °C: RL0402=1/16 W; RL0603=1/10 W; RL0805=1/8 W, 1/4W; RL1206=1/4 W, 1/2W; RL1210=1/2 W; RL1218=1 W; RL2010=3/4 W; RL2512=1 W.
RATED VOLTAGE

The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula:
V = (PxR )
Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W)
R = Resistance value (Ω )
Page 7

TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
1,000 hours at 70±2°C applied RCWV
IEC 60115-1 4.25.1
Life/
±(2% +0.5mΩ )
1.5 hours on, 0.5 hour off, still air required
Endurance
MIL-STD-202 Method 108A
1,000 hours at maximum operating
IEC 60068-2-2
High Temperature
±(1% +0.5mΩ )
temperature depending on specification,
Exposure
unpowered No direct impingement of forced air to the parts Normal power : Tolerances: 155±5℃ Double power : Tolerances: 125±5℃
Each temperature / humidity cycle is defined at
MIL-STD-202 Method 106G
Moisture Resistance
±(2% +0.5mΩ )
8 hours, 3 cycles / 24 hours for 10d with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts
MIL-STD-202 Method 107G
Thermal Shock
±(1% +0.5mΩ )
-55/+125 °C Number of cycles required is 300. Devices mounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes.
RL standard power: 2.5 times rated voltage for
IEC60115-1 4.13
Short time overload
±(2% +0.5mΩ )
5 sec at room temperature
No visible damage
RL high power: 5 times rated power for 5 sec at room temperature
Device mounted on PCB test board as
IEC 60115-1 4.33
Board Flex/
±(1% +0.5mΩ )
described, only 1 board bending required
Bending
No visible damage
3 mm bending Bending time: 60±5 seconds Ohmic value checked during bending
Page 8

TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
Electrical Test not required
J-STD-002 test B
Well tinned (≥95% covered)
- Wetting
No visible damage
Magnification 50X SMD conditions: 1st step: method B, aging 4 hours at 155 °C dry heat 2nd step: leadfree solder bath at 245±3 °C Dipping time: 3±0.5 seconds
Leadfree solder, 260 °C, 30 seconds
J-STD-002 test D
- Leaching
No visible damage
immersion time
Condition B, no pre-heat of samples.
IEC 60115-1 4.18
- Resistance to
±(1% +0.5mΩ )
Soldering Heat
Leadfree solder, 260 °C, 10 seconds
No visible damage
immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol
Page 9

REVISION HISTORY
CHANGE NOTIFICATION DESCRIPTION
REVISION DATE Version 1 Dec. 16, 2015 -
- Extend 0805 T.C.R. range
Version 0 Nov. 11, 2014 -
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”