RH1498 LINER

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa- tion that the interconnection of its circuits as described herein will not infringe on existing patent rights. PAD FUNCTION OUTPUT A –INA +INA V +INB –INB OUTPUT B V 2 6 DIE CROSS REFERENCE LTC Finished Part Number Order DICE CANDIDATE Part Number Below RH1498 RH1498 RH1498DICE RH1498DWF* Please refer to LTC standard product data sheet for other applicable product information. *DWF = DICE in wafer form. , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. 10MHz, 6V/µs Rail-to-Rail Input and Output Precision C-Load Op Amp DICE/DWF ELECTRICAL TEST LIMITS (Pre-Irradiation) V S = ±15V; VCM = VOUT = 0V, TA = 25°C, unless otherwise noted. SYMBOL PARAMETER CONDITIONS MIN MAX UNITS VOS Input Offset Voltage V CM = V+, V– 800 µV Input Offset Voltage Match (Channel-to-Channel) (Note 1) V CM = V+ to V– 1400 µV IB Input Bias Current V CM = V+ VCM = V– –715 715 nA nA Input Bias Current Match (Channel-to-Channel) (Note 1) V CM = V+, V– 0 120 nA IOS Input Offset Current V CM = V+, V– 70 nA AVOL Large-Signal Voltage Gain V O = –14.5V to 14.5V, R1 = 10k VO = –10V to 10V, R1 = 2k 1000 500 V/mV V/mV CMRR Common Mode Rejection Ratio V CM = V+ to V– 90 dB CMRR Match (Channel-to-Channel) (Note 1) V CM = V+ to V– 84 dB PSRR Power Supply Rejection Ratio V S = ±2V to ±16V 90 dB PSRR Match (Channel-to-Channel) (Note 1) V S = ±2V to ±16V 83 dB VOL Output Voltage Swing (Low) (Note 2) No Load ISINK = 1mA ISINK = 10mA 100 500 mV mV mV 117mils × 82mils, 12mils thick. Backside (substrate) is an alloyed gold layer. Connect backside to V+.

Linear Technology Corporation 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 ● FAX: (408) 434-0507 ● www.linear.com © LINEAR TECHNOLOGY CORPORATION 2006 LT 0306 • PRINTED IN USA Wafer level testing is performed per the indicated specifi cations for dice. Considerable differences in performance can often be observed for dice versus packaged units due to the infl uences of packaging and assembly on certain devices and/or parameters. Please consult factory for more information on dice performance and lot qualifi cations via lot sampling test procedures. Dice data sheet subject to change. Please consult factory for current revision in production. I.D.No. 66-13-3415 DICE/DWF ELECTRICAL TEST LIMITS (Pre-Irradiation) V S = ±15V; VCM = VOUT = 0V, TA = 25°C, unless otherwise noted. Note 1: Matching parameters are the difference between amplifi ers A and B. SYMBOL PARAMETER CONDITIONS MIN MAX UNITS VOH Output Voltage Swing (High) (Note 2) No Load ISINK = 1mA ISINK = 10mA 150 800 mV mV mV I SC Short-Circuit Current ±15 mA IS Supply Current per Amplifi er 2.5 mA GBW Gain-Bandwidth Product f = 100kHz 6.8 MHz SR Slew Rate A V = –1, RL = 2k VO = ±10V, Measure at VO = ±5V

3.5 V/µs

SYMBOL PARAMETER CONDITIONS MIN MAX UNITS VOS Input Offset Voltage V CM = V+, V– 800 µV Input Offset Voltage Match (Channel-to-Channel) (Note 1) VCM = V+ to V– 1400 µV IB Input Bias Current V CM = V+ VCM = V– –650 650 nA nA Input Bias Current Match (Channel-to-Channel) (Note 1) VCM = V+, V– 0 100 nA IOS Input Offset Current V CM = V+, V– 65 nA AVOL Large-Signal Voltage Gain V S = 5V, VO = 75mV to 4.8V, R1 = 10k VS = 3V, VO = 75mV to 2.8V, R1 = 10k 600 500 V/mV V/mV CMRR Common Mode Rejection Ratio V S = 5V, VCM = V+ to V– VS = 3V, VCM = V+ to V– dB dB CMRR Match (Channel-to-Channel) (Note 1) V S = 5V, VCM = V+ to V– VS = 3V, VCM = V+ to V– dB dB PSRR Power Supply Rejection Ratio V S = 2.2V to 12V 88 dB PSRR Match (Channel-to-Channel) (Note 1) V S = ±2V to ±16V 82 dB VOL Output Voltage Swing (Low) (Note 2) No Load ISINK = 1mA ISINK = 2.5mA 100 200 mV mV mV V OH Output Voltage Swing (High) (Note 2) No Load ISINK = 1mA ISINK = 2.5mA 150 250 mV mV mV I SC Short-Circuit Current ±15 mA IS Supply Current per Amplifi er 2.2 mA DICE/DWF ELECTRICAL TEST LIMITS (Pre-Irradiation) V S = 3V, 5V; VCM = VOUT = Half Supply, TA = 25°C, unless otherwise noted. Note 2: Output voltage swings are measured between the output and power supply rails.