RE0805DR-071KL YAGEO
Document overview
- PDF pages: 7
Technical content
Page 1


Page 2

ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
SCOPE
Both part numbers are identified by the series, size, tolerance, packing
This specification describes
type, temperature coefficient, taping reel and resistance value.
RE0402 to RE1206 ultra precision chip resistors with lead-free
D oorrddeerriinngg ccooddee
YYA AG
GEEO
O BBRRA
AN ND
terminations made by thick film
GLOBAL PART NUMBER (PREFERRED)
process.
RE XXXX X X X XX XXXX L
(1) (2) (3) (4) (5) (6) (7)
APPLICATIONS z Converters
(1) SIZE
z Printer equipment
0402 / 0603 / 0805 / 1206
z Server board
(2) TOLERANCE
z Telecom
D = ±0.5%
z Consumer
F = ±1%
FEATURES
(3) PACKAGING TYPE
z Halogen Free Epoxy
R = Paper/PE taping reel
z RoHS compliant
(4) TEMPERATURE COEFFICIENT OF RESISTANCE
- Products with lead free
E = 50 ppm/°C
terminations meet RoHS requirements
(5) TAPING REEL
- Pb-glass contained in electrodes,
07 = 7 inch dia. Reel
resistor element and glass are
10 = 10 inch dia. Reel
exempted by RoHS
13 = 13 inch dia. Reel
z Reducing environmentally hazardous wastes
(6) RESISTANCE VALUE
z High component and equipment
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
reliability
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
z Saving of PCB space
Detailed resistance rules show in table of “Resistance rule of global part number”.
z None forbidden-materials used
(7) DEFAULT CODE
in products/production
Letter L is system default code for order only (Note)
Resistance rule of global part number Resistance code rule
XXRX (10 to 97.6 Ω) XXXR (100 to 976 Ω) XKXX (1 to 9.76 KΩ) XMXX (1 MΩ)
ORDERING EXAMPLE
The ordering code of a RE0603
Example
chip resistor, TC 50 value 56 X with ±0.5% tolerance, supplied in 7-inch
10R = 10 Ω
tape reel is: RE0603DRE0756RL.
97R6 = 97.6 Ω
100R = 100 Ω
NOTE
- All our RSMD products meet RoHS
1K = 1,000 Ω
compliant and Halogen Free. "LFP" of
9K76 = 9760 Ω
the internal 2D reel label mentions "Lead Free Process"
1M = 1,000,000 Ω
- On customized label, "LFP" or specific symbol can be printed
Page 3

MARKING RE0805 / RE1206
Either resistance in E-24 or E-96: 4 digits
00
First three digits for significant figure and 4th digit for number of zeros
Fig. 1 Value = 10 kΩ
RE0603
E-24 series: 3 digits First two digits for significant figure and 3rd digit for number of zeros
Fig. 2 Value = 12 kΩ
E-96 series: 3 digits for 0603±1% EIA-96 marking method
Fig. 3 Value = 12.4 kΩ
RE0402
No marking
Fig. 4
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION The resistors are constructed out of a high-grade ceramic
OU
UTTLLIIN
NEESS
O
body. Internal metal electrodes are added at each end and

connected by a resistive layer. The resistive layer is adjusted to give the approximate required resistance and laser cutting of this resistive layer that achieves tolerance trims the value. The resistive layer is covered with a protective coat and printed with the resistance value. Finally, the two external terminations (matte tin) are added. See fig. 5.
DIMENSION Table 1 For outlines see fig. 5 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RE0402 1.00 ±0.05 0.50 ±0.05 0.32 ±0.05 0.20 ±0.10 0.25 ±0.10 RE0603 1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15 RE0805 2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20 RE1206 3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
Page 4

ELECTRICAL CHARACTERISTICS

RE0402
10 Ω to 1 MΩ
–55 °C to +155 °C
1/16 W
50 V
100 V
100 V
±50 ppm/°C
RE0603
10 Ω to 1 MΩ
–55 °C to +155 °C
1/10 W
50 V
100 V
100 V
±50 ppm/°C
RE0805
10 Ω to 1 MΩ
–55 °C to +155 °C
1/8 W
150 V
300 V
300 V
±50 ppm/°C
RE1206
10 Ω to 1 MΩ
–55 °C to +155 °C
1/4 W
200 V
500 V
400 V
±50 ppm/°C
NOTE
The maximum working voltage that may be continuously applied to the resistor element, see “IEC publication 60115-8”
FOOTPRINT AND SOLDERING PROFILES For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE
REEL DIMENSION
RE0402
RE0603
RE0805
RE1206
Paper/PE taping reel (R)
7" (178 mm)
10,000
5,000
5,000
5,000
10" (254 mm)
20,000
10,000
10,000
10,000
13" (330 mm)
50,000
20,000
20,000
20,000
NOTE
- For Paper/Embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”
FUNCTIONAL DESCRIPTION

PPO OW
WEERR RRA
ATTIIN
NG G
Each type rated power at 70°C: RE0402=1/16 W, RE0603=1/10 W, RE0805=1/8 W, RE1206=1/4 W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula:
V=√(P X R) or max. working voltage whichever is less
Where
V=Continuous rated DC or AC (rms) working voltage (V)
P=Rated power (W)
R=Resistance value (X)
Page 5

TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
At 70±5 °C for 1,000 hours, RCWV applied for
IEC 60115-1 4.25.1
±(3%+0.05 Ω)
Life/Endurance
1.5 hours on, 0.5 hour off, still air required
1,000 hours at 155±5 °C, unpowered
IEC 60068-2-2
±(3%+0.05 Ω)
High Temperature Exposure/ Endurance at Upper Category Temperature
Each temperature / humidity cycle is defined at 8
MIL-STD-202G Method-106G
±(3%+0.05 Ω)
Moisture
hours, 3 cycles / 24 hours for 10d. with 25 °C /
Resistance
65 °C 95% R.H, without steps 7a & 7b, unpowered Parts mounted on test-boards, without condensation on parts Measurement at 24±2 hours after test conclusion
MIL-STD-202G Method-107G
±(1%+0.05 Ω)
Thermal Shock
-55/+125 °C Number of cycles required is 300. Devices unmounted Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air
2.5 times of rated voltage or maximum overload
IEC60115-1 4.13
±(1%+0.05 Ω)
Short Time
voltage whichever is less for 5 sec at room
Overload
No visible damage
temperature
Chips mounted on a 90mm glass epoxy resin
IEC 60068-2-21
±(1%+0.05 Ω)
Board Flex/ Bending
PCB (FR4)
No visible damage
Bending: see table 5 for each size Bending time: 60±5 seconds
Page 6

TEST
TEST METHOD
PROCEDURE
Solderability
IPC/JEDEC J-STD-002B test B
Electrical Test not required
- Wetting
Magnification 50X SMD conditions:
REQUIREMENTS
Well tinned (≥95% covered) No visible damage
1st step: method B, aging 4 hours at 155°C dry heat 2nd step: leadfree solder bath at 245±3°C Dipping time: 3±0.5 seconds
Leadfree solder, 260 °C, 30 seconds
IPC/JEDEC J-STD-002B test D
- Leaching
No visible damage
immersion time
Condition B, no pre-heat of samples.
IEC 60068-2-58
±(1%+0.05 Ω)
- Resistance to
Leadfree solder, 260 °C, 10 seconds
Soldering Heat
No visible damage
immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol
Table 5 Bending for sizes 0402 to 1206 TYPE
RE0402
RE0603
RE0805
RE1206
Specification (mm)
5
3
3
2
Page 7

REVISION HISTORY
CHANGE NOTIFICATION DESCRIPTION
REVISION DATE Version 0 Dec 10, 2010 -
- New datasheet for thick film ultra precision chip resistors sizes of 0201/0402/0603/0805/1206, 0.5%, 1%, TC50 with lead-free terminations
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN.”