RCH VISHAY

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

www.vishay.com Vishay Sfernice Revision: 06-Jul-15 1 Document Number: 50006 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Power Resistor, for Mounting onto a Heatsink Thick Film Technology Manufactured in cermet thick film technology, these power resistors exhibit remarkable ch aracteristics and the series includes 4 types ranging from 5 W to 50 W. Designed to be mounted onto a heatsink, the resistors can bear high short time overload s and 3 types of terminations are available. The resistors are non inductive and are particularly suitable for high frequency operation and cut-out circuits.

FEATURES

  • 5 W to 50 W
  • High power rating
  • High overload capabilities up to 2500 V RMS
  • Wide resistance range from 0.24  to 1 M
  • High thermal capacity up to 0.8 °C/W
  • Easy mounting
  • Reduced size and weight
  • High insulation: 10 6 M
  • Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 Note
  • Tolerances unless stated: ± 0.3 mm DIMENSIONS in millimeters MODEL RCH5 RCH10 RCH25 RCH50 L 16.6 19 28 47.8 W 9 11 14 15.5 H 16.4 20.6 27.5 29.5 P Leads Pitch 10.2 12.7 18.3 30.5 F Connection Pitch 11.3 14.3 18.3 39.7 T 12.5 15.9 19.8 21.4 S 5 . 357 . 78 Ø D 2.4 2.4 3.2 3.2 Weight (g) 457 1 2 Ø 2 RCH...R RCH...V W H F S L Ø D P 4.8 3 Ø 2.1 T 9 RCH...S

www.vishay.com Vishay Sfernice Revision: 06-Jul-15 2 Document Number: 50006 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 STANDARD ELECTRICAL SPECIFICATIONS MODEL RESISTANCE RANGE RATED POWER P25 °C W TOLERANCE ± % TEMPERATURE COEFFICIENT ± ppm/°C SERIES RCH 5 0.24 to 1M 5 1, 2, 5, 10 150, 250 E24 range RCH 10 0.24 to 1M 10 1, 2, 5, 10 150, 250 E24 range RCH 25 0.24 to 1M 25 1, 2, 5, 10 150, 250 E24 range RCH 50 0.24 to 1M 50 1, 2, 5, 10 150, 250 E24 range MECHANICAL SPECIFICATIONS Mechanical Protection Insulated case Resistive Element Cermet Substrate Alumina Connections Tinned copper alloy ENVIRONMENTAL SPECIFICATIONS Temperature Range -55 °C to +125 °C Climatic Category 55 / 125 / 56 Flammability IEC 60695-11-5 2 applications 30 s separated by 60 s TECHNICAL SPECIFICATIONS Dissipation and Associated Onto a heatsink Power Rating: Chassis Mounted Unmounted

5 W to 50 W

2 W to 5.5 W Temperature Coefficient ± 150 ppm/°C Insulation Resistance 106 M Total Inductance  0.1 μH PERFORMANCE TESTS CONDITIONS REQUIREMENTS Momentary Overload NF EN140000 CEI 115_1

2 Pr/5 s

U S < 1.5 UL Rapid Temperature Change NF EN140000 125 °C CEI 68215 Test Na 5 cycles -55 °C to +125 °C Load Life NF EN140000 CEI 115_1 Humidity (Steady State) 56 days RH 95 % MIL-STD-202 Method 103 B and C < ± (0.5 % + 0.05 ) RESISTANCE VALUE IN RELATION TO TOLERANCE AND TCR Resistance Values < 1  > 1  Standard Tolerances ± 5 % ± 10 % Standard TCR ± 250 ppm/°C ± 150 ppm/°C Tolerance on Request ± 1 % to ± 2 % SPECIAL FEATURES MODEL RCH 5 RCH 10 RCH 25 RCH 50 Power Rating-Chassis Mounted 5 W 10 W 25 W 50 W Power Rating-Unmounted 2 W 2.5 W 4 W 5.5 W Thermal Resistance R th (j - c) 4.8 °C/W 3.2 °C/W 1.4 °C/W 0.8 °C/W Limiting Element Voltage (VRMS) 160 V 250 V 550 V 1285 V Max. Overload Voltage (VRMS) 320 V 500 V 1100 V 2500 V Dielectric Strength (VRMS) 50 Hz, 1 min MIL-STD-202 Method 301 10 mA max. 2000 V 2000 V 3500 V 3500 V Critical Resistance 5120  6250  12 100  33 024 

www.vishay.com Vishay Sfernice Revision: 06-Jul-15 3 Document Number: 50006 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 RECOMMENDATIONS FOR MOUNTING ONTO A HEATSINK

  • Surfaces in contact must be carefully cleaned.
  • The heatsink must have an acceptable flatness: From 0.05 mm to 0.1 mm/100 mm.
  • Roughness of the heatsink must be around 6.3 μm. In order to improve the rmal conductivity, surfaces in contact (alumina, heatsink) are coated with a silicone grease (type Sl 340 from Rhône-Poulenc or Dow 340 from Dow Corning).
  • The fastening of the resistor to the heatsink is under pressure control of two screws (not supplied).
  • In order to improve the dissipation, either forced-air cooling or liquid cooling may be used.
  • A low thermal radiation of the case allows several resistors to be mounted onto the same heatsink.
  • Do not forget to respect an insulation value between two resistors (dielectric strength in dry air 1 kV/mm).
  • In any case the hot spot temperature, measured locally on the case must not exceed 125 °C.
  • Tests should be performed by the user. CHOICE OF THE HEATSINK The user must choose according to the working conditions of the component (power, room temperature).  Maximum working temperature must not exceed 125 °C. The dissipated power is simply calculated by the following ratio: P: Expressed in W T: Difference between maxi mum working temperature and room temperature or fluid cooling temperature. R th (j - c): Thermal resistance value measured betw een resistive layer and outer side of the resistor. It is the thermal resistance of the component. Rth (c - h): Thermal resistance value measured between outer side of the resistor and upper side of the heatsink. This is the thermal resistance of the interface (grease, thermal pad), and the quality of the fastening device. Rth (h - a): Thermal resistance of the heatsink. Example:  R TH (c - a) for RCH 25 power rating 20 W at ambient temperature +50 °C Thermal resistance RTH (j - c): 2.5 °C/W  Considering equation (1) we have: RTH (j - c) = 1.4 °C/W (Special Features) RTH (j - c) + RTH (c - h) + RTH (h - a) = = = 3.75 °C/W  RTH (c - h) + RTH (h - a)  3.75 °C/W - 1.4 °C/W  2.35 °C/W with a thermal grease RTH (c - h) = 1 °C/W, we need a heatsink with RTH (h - a) = 1.35 °C/W Tightening Torque on heatsink RCH 5 RCH 10 RCH 25 RCH 50 0.5 Nm 0.6 Nm 0.7 Nm 1 Nm P T 1 -----

www.vishay.com Vishay Sfernice Revision: 06-Jul-15 4 Document Number: 50006 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 OVERLOADS The applied voltage must always be lower than the maximum overload voltage as shown in the special features table. The values indicated on the graph below are applicable to resistors in air or mounted onto a heatsink. ENERGY CURVE POWER CURVE POWER RATING For resistors mounted onto heatsink and thermal resistance of 1 °C/W. To improve the thermal conductivity, surfaces in contact should be coated with a silicone grease. MARKING Model, style, resistance value (in ), tolerance (in %), manufacturing date, Vishay Sfernice trademark. 0.01 0.1 100 ENERGY IN JOULES OVERLOAD DURATION IN s RCH50 RCH25 RCH10 RCH5 10-7 10-6 10-5 10-4 10-3 10-2 10-1 100 100 1000 10 000 100 000 1 000 000 POWER IN W OVERLOAD DURATION IN s RCH50 RCH25 RCH10 RCH5 10-7 10-6 10-5 10-4 10-3 10-2 10-1 100 100RATED POWER IN % AMBIENT TEMPERATURE IN °C 20 40 60 80 100 120 140 RCH 5 RCH 10 RCH 25 RCH 50

www.vishay.com Vishay Sfernice Revision: 06-Jul-15 5 Document Number: 50006 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

ORDERING INFORMATION

RCH 25 3.3 k  ± 5 % R xxx MODEL STYLE RESISTANCE VALUE TOLERANCE Optional ± 1 % ± 2 % ± 5 % ± 10 % CONNECTIONS Optional S: Flat with hole R: Round lead V: M2 screw CUSTOM DESIGN Optional GLOBAL PART NUMBER INFORMATION GLOBAL MODEL SIZE LEADS OHMIC VALUE TOLERANCE PACKAGING SPECIAL RCH 05 R = Round lead V = M2 screw S = Flat with hole The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 4R700 = 4.7  48701 = 48 700  R0100 = 0.01  R6800 = 0.68  27000 = 2700  = 2.7 k F = 1 % G = 2 % J = 5 % K = 10 % S06 = Bag 25 pieces As applicable Ex = XXX 1 0 S 3 3 0 0J03C HR 0S6

www.vishay.com Vishay Revision: 13-Jun-16 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applicatio ns are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular applic ation. It is the customer’s responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different ap plications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s term s and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay product s not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.