RC4136

Quad General-Purpose Operational Amplifiers datasheet (Rev. A)

Document overview

• Manufacturer or author: Texas Instruments, Incorporated [SLOS072,A]
• PDF pages: 8

Technical content

RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068 Continuous Short-Circuit Protection /C0068 Wide Common-Mode and Differential Voltage Ranges /C0068 No Frequency Compensation Required /C0068 Low Power Consumption /C0068 No Latch-Up /C0068 Unity-Gain Bandwidth...3 M H z T y p /C0068 Gain and Phase Match Between Amplifiers /C0068 Designed To Be Interchangeable With Raytheon RC4136, RM4136, and RV4136 /C0068 Low Noise ...8 n V√Hz Typ at 1 kHz

description

The RC4136, RM4136, and RV4136 are quad general-purpose operational amplifiers, with each amplifier electrically similar to the µA741, except that offset null capability is not provided. The high common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are short-circuit protected and the internal frequency compensation ensures stability without external components. The RC4136 is characterized for operation from 0°C to 70°C, the RM4136 is characterized for operation over the full military temperature range of –55°C to 125 °C, and the RV4136 is characterized for operation from –40°C to 85°C. symbol (each amplifier) IN+ IN– OUT AVAILABLE OPTIONS VIOMAX PACKAGE TA VIOMAX AT 25°C SMALL OUTLINE CHIP CARRIER CERAMIC DIP PLASTIC DIP FLATAT 25 C (D) (FK) (J) (N) (W) 0°C to 70°C 6 mV RC4136D — — RC4136N — –40°C to 85°C 6 mV RV4136D — — RV4136N — –55°C to 125°C 4 mV — RM4136FK RM4136J — RM4136W The D packages are available taped and reeled. Add the suffix R to the device type (e.g., RC4136DR). The RM4136 and RV4136 are obsolete and are no longer supplied. Copyright  2002, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. 1IN– 1IN+ 1OUT 2OUT 2IN+ 2IN– V CC– 4IN– 4IN+ 4OUT V CC+ 3OUT 3IN+ 3IN– RM4136 ...J O R W PACKAGE ALL OTHERS ...D O R N PACKAGE (TOP VIEW) 3 2 1 20 19 91 0 1 1 1 2 1 3 4OUT NC V CC+ NC 3OUT 1OUT NC 2OUT NC 2IN+ RM4136 . . . FK PACKAGE (TOP VIEW) NC 3IN– 3IN+ 2IN– NC 1IN+ 1IN– 4IN– 4IN+ VCC– NC – No internal connection On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

schematic (each amplifier) OUT IN+ IN– VCC – VCC+ absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC –. 2. Differential voltages are at IN+ with respect to IN–. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded. 5. The package thermal impedance is calculated in accordance with JESD 51-7. DISSIPATION RATING TABLE PACKAGE TA ≤ 25°C POWER RATING DERATING FACTOR DERATE ABOVE T A TA = 70°C POWER RATING TA = 85°C POWER RATING TA = 125°C POWER RATING FK 800 mW 11.0 mW/°C 77°C 800 mW 715 mW 275 mW J 800 mW 11.0 mW/ °C7 7 °C 800 mW 715 mW 275 mW W 800 mW 8.0 mW/°C 50°C 640 mW 520 mW 200 mW The RM4136 and RV4136 are obsolete and are no longer supplied.

RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions MIN MAX UNIT VCC+ Supply voltage 5 15 V VCC – Supply voltage –5 –15 V electrical characteristics at specified free-air temperature, VCC+ = 15 V, VCC – = –15 V PARAMETER TEST CONDITIONS † RC4136 RM4136 RV4136 UNITPARAMETER TEST CONDITIONS † MIN TYP MAX MIN TYP MAX MIN TYP MAX UNIT Input offset 25°C 0.5 6 0.5 4 0.5 6 VIL Input offset voltage VO = 0 Full range 7.5 6 7.5 mV Input offset 25°C 5 200 5 150 5 200 IIO Input offset current VO = 0 Full range 300 500 500 nA 25°C 140 500 140 400 140 500 IIB Input bias current VO = 0 Full range 800 1500 1500 nA Vi Input voltage range 25°C ±12 ±14 ±12 ±14 ±12 ±14 V Maximum peak R L = 10 kΩ 25°C ±12 ±14 ±12 ±14 ±12 ±14 VOM M aximum pea k output voltage R L = 2 kΩ 25°C ±10 ±13 ±10 ±13 ±10 ±13 VVOM out ut voltage swing R L ≥ 2 kΩ Full range ±10 ±10 ±10 V Large-signal VO = ±10 V 25°C 20 300 50 350 20 300 AVD gg differential voltage amplification VO = ±10 V, R L ≥ 2 kΩ Full range 15 25 15 V/mV Unity-gain bandwidth 25°C 3 3.5 3 MHz ri Input resistance 25°C 0.3* 5 0.3* 5 0.3* 5 M Ω CMRR Common-mode rejection ratio VO = 0, R S = 50 Ω 25°C 70 90 70 90 70 90 dB Supply-voltage VCC = ±9Vt o±15 VkSVS yg sensitivity VCC = ±9 V to±15 V, VO =0 25°C 30 150 30 150 30 150 µV/VSVS (∆VIO/∆VCC ) VO = 0 µ Vn Equivalent input noise voltage (closed loop) AVD = 100, BW = 1 Hz, f = 1 kHz, R S = 100 Ω 25°C 8 8 8 nV√Hz Supply current 25°C 5 11.3 5 11.3 5 11.3 ICC Supply current (all four amplifiers)VO = 0, No load MIN TA 6 13.7 6 13.3 6 13.7 mA(all four am lifiers) MAX T A 4.5 10 4.5 10 4.5 10 Total power 25°C 150 340 150 340 150 340 PD Total ower dissipation VO = 0, No load MIN TA 180 400 180 400 180 400 mW (all four amplifiers) MAX T A 135 300 135 300 135 300 Crosstalk AVD = 100, attenuation VD , f = 10 kHz, 25°C 105 105 105 dB (VO1 /VO2 ) R S = 1 kΩ *This parameter is not production tested. † All characteristics are measured under open-loop conditions with zero common-mode input voltage, unless otherwise specified. Full range is 0°C to 70°C for RC4136, –55°C to 125°C for RM4136, and –40°C to 85°C for RV4136. Minimum TA is 0°C for RC4136, –55°C for RM4136, and –40°C for RV4136. Maximum TA is 70°C for RC4136, 125°C for RM4136, and 85°C for RV4136. The RM4136 and RV4136 are obsolete and are no longer supplied.

RC4136, RM4136, RV4136 QUAD GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS072A – MARCH 1978 – REVISED JANUARY 2002

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

operating characteristics, VCC+ = 15 V, VCC – = –15 V, TA = 25°C PARAMETER TEST CONDITIONS TYP UNIT tr Rise time VI = 20 mV, C L = 100 pF,R L = 2 kΩ 0.13 µs Overshoot factor VI = 20 mV, C L = 100 pF,R L = 2 kΩ 5 % SR Slew rate at unity gain VI=1 0V C L = 100pF R L =2k Ω 17 V/µsSR Slew rate at unity gain VI = 10 V, C L = 100 pF, R L = 2 kΩ 1.7 V/µs The RM4136 and RV4136 are obsolete and are no longer supplied.

www.ti.com 11-Nov-2025 PACKAGING INFORMATION Orderable part number Status (1) Material type (2) Package | Pins Package qty | Carrier RoHS (3) Lead finish/ Ball material (4) MSL rating/ Peak reflow (5) Op temp (°C) Part marking (6) RC4136N Active Production PDIP (N) | 14 25 | TUBE Yes NIPDAU N/A for Pkg Type 0 to 70 RC4136N RC4136N.A Active Production PDIP (N) | 14 25 | TUBE Yes NIPDAU N/A for Pkg Type 0 to 70 RC4136N RC4136NE4 Active Production PDIP (N) | 14 25 | TUBE - Call TI Call TI 0 to 70 (1) Status: For more details on status, see our product life cycle. (2) Material type: When designated, preproduction parts are prototypes/experimental devices, and are not yet approved or released for full production. Testing and final process, including without limitation quality assurance, reliability performance testing, and/or process qualification, may not yet be complete, and this item is subject to further changes or possible discontinuation. If available for ordering, purchases will be subject to an additional waiver at checkout, and are intended for early internal evaluation purposes only. These items are sold without warranties of any kind. (3) RoHS values: Yes, No, RoHS Exempt. See the TI RoHS Statement for additional information and value definition. (4) Lead finish/Ball material: Parts may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two lines if the finish value exceeds the maximum column width. (5) MSL rating/Peak reflow: The moisture sensitivity level ratings and peak solder (reflow) temperatures. In the event that a part has multiple moisture sensitivity ratings, only the lowest level per JEDEC standards is shown. Refer to the shipping label for the actual reflow temperature that will be used to mount the part to the printed circuit board. (6) Part marking: There may be an additional marking, which relates to the logo, the lot trace code information, or the environmental category of the part. Multiple part markings will be inside parentheses. Only one part marking contained in parentheses and separated by a "~" will appear on a part. If a line is indented then it is a continuation of the previous line and the two combined represent the entire part marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1

PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2026 TUBE L - Tube length T - Tube height W - Tube width B - Alignment groove width *All dimensions are nominal Device Package Name Package Type Pins SPQ L (mm) W (mm) T (µm) B (mm) RC4136N N PDIP 14 25 506 13.97 11230 4.32 RC4136N.A N PDIP 14 25 506 13.97 11230 4.32 Pack Materials-Page 1

IMPORTANT NOTICE AND DISCLAIMER TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCE DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS” AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable standards, and any other safety, security, regulatory or other requirements. These resources are subject to change without notice. TI grants you permission to use these resources only for development of an application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you fully indemnify TI and its representatives against any claims, damages, costs, losses, and liabilities arising out of your use of these resources. TI’s products are provided subject to TI’s Terms of Sale, TI’s General Quality Guidelines, or other applicable terms available either on ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. Unless TI explicitly designates a product as custom or customer-specified, TI products are standard, catalog, general purpose devices. TI objects to and rejects any additional or different terms you may propose. IMPORTANT NOTICE Copyright © 2026, Texas Instruments Incorporated Last updated 10/2025