DATASHEET SEARCH SITE
Document overview
- PDF pages: 2
Technical content
Page 1

28 mm (1-1/8 Inch) Diameter, Side-on Type
Compatible Pin Layout with Any 28 mm dia. Side-on PMT
Dark Current Becomes 1/50 by Cooling, For UV to NIR

CHARACTERISTICS
(at 25 °C)
| Parameter | Min. | Typ. | Max. | Unit | |
|---|---|---|---|---|---|
| Cathode Sensitivity | Luminous (2856 K) | 400 | 525 | — | µA/lm |
| Quantum Efficiency at 450 nm | — | 25 | — | % | |
| Blue Sensitivity Index (CS 5-58) | — | 13 | — | — | |
| Anode Sensitivity | Luminous (2856 K) | 3000 | 5000 | — | A/lm |
| Gain | — | 9.5 × 106 | — | — | |
| Anode Dark Current (After 30 min Storage in Darkness) | — | 15 | 50 | nA | |
| — | 0.3 A | 1 A | nA | ||
| Time Response | Anode Pulse Rise Time | — | 2.2 | — | ns |
| Electron Transit Time | — | 22 | — | ns | |
NOTE: AThe values are measured at 25 °C and a Peltier supply current of 2.7 A, with a heatsink attached to the R9182-01 for forced air cooling.
Figure 2: Typical Gain Characteristics Figure 3: Temperature vs. Dark Current
Figure 1: Typical Spectral Response


SUPPLY VOLTAGE (V)
WAVELENGTH (nm)
Characteristics with and without Cooling

AMBIENT TEMPERATURE (°C)
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2014 Hamamatsu Photonics K.K.
Page 2
PHOTOMULTIPLIER TUBE R9182-01 (Cooled PMT)
SPECIFICATIONS
Figure 4: Dimensional Outline and Basing Diagram (Unit: mm)
GENERAL

| Parameter | Description / Value | Unit | |
|---|---|---|---|
| Spectral Response | 185 to 900 | nm | |
| Wavelength of Maximum Response | 450 | nm | |
| Photocathode | MateriaI | Multialkali | — |
| Minimum Effective Area | 10 × 14 | mm | |
| Window Material | UV glass | — | |
| Dynode | Structure | Circular-cage | — |
| Number of Stages | 9 | — | |
| Base | 11-pin base JEDEC No. B11-88 | — | |
| Weight | Approx. 63 | g | |
| Operating Ambient Temperature Storage Temperature | -30 to +50 -30 to +50 | °C °C | |
| SuitabIe Socket | E678-11A (Sold separately) | — | |
| SuitabIe Socket Assembly | E717-63 (Sold separately) | — | |

DY6 DY7 DY5 6 7 5 DY8
DY4
8 4
9 3 DY3
DY9
MAXIMUM RATINGS (Absolute Maximum Values)
10 2
| Parameter | Value | Unit | |
|---|---|---|---|
| Supply Voltage | Between Anode and Cathode | 1250 | V |
| Between Anode and Last Dynode | 250 | V | |
| Average Anode Current | 0.1 | mA | |
DY2
P 11 1 K DY1 DIRECTION OF LIGHT
BOTTOM VIEW
(BASING DIAGRAM)
VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE
TPMSA0046EA
P
Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 Ratio
1 1 1 1 1 1 1 1 1 1
Supply Voltage: 1000 V, K: Cathode, Dy: Dynode, P: Anode
PELTIER DEVICE
RELATED PRODUCTS
| Parameter | Description / Value | Unit |
|---|---|---|
| Maximum Cooling Capacity (Qmax.) | 8.2 | W |
| Maximum Supply Current | 2.7 | A |
| Maximum Applied Voltage | 3.0 | V |
| Maximum Operating Temperature | 50 | °C |
| Leak Current Between Cathode and Peltier GND | 1 or less 1 | nA |
| NOTE: 1Insulation resistance at 25 °C: 1.0 × 1014 Ω PELTIER COOLING PERFORMANCE | ||
| Parameter | Description / Value | Unit |
| Cathode Cooling Temperature (∆T) | 20 2 | °C |
| Time Required to Reach Target Cooling Temperature | 5 3 | min |

NOTE: 2, 3At a supply current of 2.7 A and with a heatsink attached to the R9182- 01 for forced air cooling. Cooling temperature (∆T) is the difference between the ambient temperature and the cathode temperature when fully cooled. When attaching a heatsink to the R9182-01, apply thermal grease to the surface of the Peltier device so that the heat on the hot side dissipates efficiently through the heatsink during operation. Temperature should be controlled by current during operation of the Peltier device.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se
TPMS1081E01
Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail: info@hamamatsu.it China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail: hpc@hamamatsu.com.cn
FEB. 2014 IP