R8900-00-C12 HAMAMATSU

Document overview

  • PDF pages: 4

Technical content

Page 1

PDF page 1 diagram
PDF page 1 diagram

FEATURES

I 6 (X) + 6 (Y) Cross Plate Anode I High Spatial Resolution I Wide Effective Area

APPLICATIONS

I Animal PET (Positron Emission Tomography) I Compact Gamma Camera I Scintillation Mammography

GENERAL

Parameter Description / Value Unit
Spectral Response 300 to 650 nm
Wavelength of Maximum Response 420 nm
Photocathode Material Bialkali —
Minimum Effective Area 23.5 × 23.5 mm
Window Material Borosilicate glass —
Thickness 0.8 mm
Dynode Structure Metal channel dynode —
Number of Stages 11 —
Anode 6 (X) + 6 (Y) Cross plate anode —
Weight Approx. 28 (U Type: Approx. 38) g
Suitable Socket E678-32B (sold separately) —
Operating Ambient Temperature -80 to +50 (U Type: -30 to +50) °C
Storage Temperature -80 to +50 (U Type: -30 to +50) °C
MAXIMUM RATINGS (Absolute Maximum Values)
Parameter Value Unit
Supply Voltage Between Anode and Cathode 1000 V
Average Anode Current in Total 0.1 mA
CHARACTERISTICS (at 25 °C)
Parameter Min. Typ. Max. Unit
Cathode Sensitivity Luminous (2856 K) 50 85 — µA/lm
Quantum Efficiency at 420 nm — 25 — %
Blue Sensitivity Index (CS 5-58) 7.5 10 — —
Anode Sensitivity Luminous (2856 K) 15 60 — A/lm
Gain — 0.7 × 106 — —
Anode Dark Current in Total of Anodes (after 30 min storage in darkness) — 2 10 nA
Time Response Anode Pulse Rise Time — 2.2 — ns
Electron Transit Time — 11.9 — ns
Transit Time Spread (FWHM) — 0.75 — ns

NOTE: Anode characteristics are measured with the voltage distribution ratio shown below.

VOLTAGE DISTRIBUTION RATIO AND SUPPLY VOLTAGE

Electrodes

K G Dy1 Dy2 Dy3 Dy4 Dy5 Dy6

Dy7 Dy8 Dy9 Dy10 Dy11 P

Ratio

0.5

0.5 1.5

Supply Voltage: 800 V, K: Cathode, G: Grid, Dy: Dynode, P: Anode

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2006 Hamamatsu Photonics K.K.

Page 2

POSITION SENSITIVE PHOTOMULTIPLIER TUBES

R8900-00-C12, R8900U-00-C12

Figure 1: Typical Spectral Response

PDF page 2 diagram

WAVELENGTH (nm)

Figure 3: Spatial Resolution

X-Axis

PDF page 2 diagram

POSITION (mm)

SUPPLY VOLTAGE : -800 V LIGHT SOURCE : TUNGSTEN LAMP SPOT DIAMETER : 1 mm \* Output of each anode under a light spot scanning at a center.

Figure 4: Position Response Using PX/PY Anodes

TPMHB0763EA 1.5

PX6 (PY6)
PX1 (PY1) PX-ANODES PY-ANODES

1

0.5

0

-0.5

-1

-1.5 -15 -10 -5

INCIDENT POSITION (mm)

SUPPLY VOLTAGE: -800 V LIGHT SOURCE : TUNGSTEN LAMP

WAVELENGTH: 400 nm SPOT DIAMETER: 1 mm

SCAN PITCH

: 1 mm

Figure 2: Typical Gain and Anode Dark Current

PDF page 2 diagram

SUPPLY VOLTAGE (V)

Y-Axis

PDF page 2 diagram

POSITION (mm)

SUPPLY VOLTAGE : -800 V LIGHT SOURCE : TUNGSTEN LAMP SPOT DIAMETER : 1 mm

Page 3

PDF page 3 diagram
PDF page 3 diagram
PDF page 3 diagram

Positioning histogram

of a 10 × 10 array of

2 mm × 2 mm × 20 mm

BGO elements for 511 keV

γ-rays.

Figure 6: R8900-00-C12 Dimensional Outline and Basing Diagram (Unit: mm)

Basing Diagram

CUT

CUT

PDF page 3 diagram

G (IC) Dy1 Dy3 Dy5 Dy7 Dy9 Dy11 (IC)

PDF page 3 diagram

TOP VIEW

SIDE VIEW

BOTTOM VIEW

K: Photocathode

(IC)

(IC) (IC) (IC)

Dy: Dynode (Dy1-Dy11) P: Anode (PX1-PX6)

BOTTOM VIEW

(PY1-PY6)

Basing Diagram

G: Grid IC: Internal Connection (Do not use)

TPMHA0523EA

Figure 7: R8900U-00-C12 Dimensional Outline and Basing Diagram (Unit: mm) (R8900-00-C12 with an Insulation Cover)

Basing Diagram

GUIDE CORNER

CUT

PDF page 3 diagram

G Dy1 Dy3 Dy5 Dy7 Dy9 Dy11 CUT

PDF page 3 diagram

2.54 PITCH

BOTTOM VIEW

K: Photocathode

BOTTOM VIEW

Dy: Dynode (Dy1-Dy11)

Basing Diagram

P: Anode (PX1-PX6) (PY1-PY6) G: Grid

TPMHA0524EC

Page 4

POSITION SENSITIVE PHOTOMULTIPLIER TUBES

R8900-00-C12, R8900U-00-C12

[ACCESSORIES] (Unit: mm)

G D Type Socket Assembly E7514

G Socket E678-32B SOLD SEPARATELY

SOLD SEPARATELY

PDF page 4 diagram
PDF page 4 diagram

SIGNAL OUTPUT : 0.8D-QEV (GRAY)

TACCA0094ED

: 110 kΩ : 330 kΩ : 220 kΩ : 1 MΩ : 51 Ω : 10 nF

: RG-174/U (RED)

SUPPLY GND

In case of using PMT with E7514, PMT must be operated within 0 °C to 50 °C (Storage temperature for E7514 only: -15 °C to +60 °C)

TACCA0236EB

WARNING ~ High Voltage ~

The product is operated at high voltage potential. Further, the metal housing of the product is connected to the photocathode (potential) so that it becomes a high voltage potential when the product is operated at a negative high voltage (anode grounded). Accordingly, extreme safety care must be taken for the electrical shock hazard to the operator or the damage to the other instruments.

\* PATENT: USA: 5410211 and other(9), GBR: 551767 and other(9), DEU: 69209809 and other(9), FRA: 551767 and other(9), JPN: 3078905 and other(9)

WEB SITE www.hamamatsu.com

HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205

U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk

North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it

TPMH1299E01 OCT. 2006 IP