R7400U HAMAMATSU

Document overview

  • PDF pages: 8

Technical content

Page 1

METAL PACKAGE PHOTOMULTIPLIER TUBE R7400U SERIES
Compact size (16 mm diameter, 12 mm seated length), Fast Time response (rise time 0.78 ns) The R7400U series is a subminiature photomultiplier tube with a 16 mm diameter and 12 mm seated length. A precision engi- neered 8-stage electron multiplier (composed of metal channel dynodes) is incorporated in the TO-8 package to produce a noise free gain of 700,000 times (R7400U). The R7400U series also features excellent response time with a rise time of 0.78 ns. Vari- ous types of the R7400U series are available with different spec- tral response and gain ranges, including those selected specifi- cally for photon counting applications. Hamamatsu also provides a hemispherical lens input option to the series (R7401 and R7402), effectively doubling the active area. Left: R7400U Right: R7401/R7402 FEATURES World's smallest photomultiplier tubes assembled in a TO-8 metal package (1/7th of the Hamamatsu R647). The necessary components are built into a TO-8 package while retaining full photomultiplier tube performance to cre- ate a new generation of photosensors. Photon counting type: R7400P. The R7400P is specially selected on account of low noise and high gain for use in photon counting applications. Hemispherical lens window types: R7401 (bialkali), R7402 (multialkali). The hemispherical lens window doubles the effective input area to 12 mm in diameter. SERIES
Solar Blind UV to Visible Range UV to Near IR Range Insulation Cover
Standard R7400U-09 R7400U/R7400U-03/R7400U-06 R7400U-01/R7400U-02/R7400U-04/R7400U-20 Yes
For Photon Counting — R7400P — Yes
With Lens — R7401 (Visible Range) R7402 (Visible to Near IR Range ) Yes
GENERAL Parameter Description/Value Unit Minimum Effective Area 8 mm Structure Metal Channel Dynode — Number of Stage 8 R7400U Series/R7400P Approx. 5.3 Weight g R7401/R7402/R7401P Approx. 6.3 R7400U Series/R7400P -80 to +50 Ambient Temperature °C R7401/R7402/R7401P -30 to +50 VOLTAGE DISTRIBUTION RATIO Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 P Ratio 1 1 1 1 1 1 1 1 0.5 Supply Voltage: 800 V K: Cathode Dy: Dynode P: Anode
Parameter Description/Value Unit
Minimum Effective Area 8 mm
Dynode Structure Metal Channel —
Number of Stage 8
Weight R7400U Series/R7400P Approx. 5.3 g
R7401/R7402/R7401P Approx. 6.3
Ambient Temperature R7400U Series/R7400P -80 to +50 °C
R7401/R7402/R7401P -30 to +50
PDF page 1 diagram

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2001 Hamamatsu Photonics K.K.

Page 2

CHARACTERISTICS (at 25 °C)

Type No. Remarks Spectral Response Photo- cathode Material Window Material Out- line No. Maximum Ratings Cathode Sensitivity
Range (nm) Peak Wave- Iength (nm) Anode to Cathode Voltage (V dc) Average Anode Current (mA) Luminous Blue(5-58) Typ. (µA/lm-b) Red/White Ratio Typ. ×10-3 Radiant Typ. (mA/W)
Min. (µA/lm) Typ. (µA/lm)
R7400U-09 Solar Blind 160 to 320 240 Cs-Te Synthetic silica 1000(d) 0.01 — — — — 22(a)
R7400U Visible 300 to 650 420 Bialkali Borosilicate glass 0.1(e) 40 70 8 — 62
R7400U-03 UV to Visible 185 to 650 UV glass
R7400U-06 160 to 650 Synthetic silica
R7400U-01 Visible 300 to 850 400 Multialkali Borosilicate glass 80 150 — 200 60
R7400U-02 UV to Near IR 300 to 880 500 200 250 250 58
R7400U-20 300 to 900 630 350 500 450 78 (at 630 nm)
R7400U-04 185 to 850 400 UV glass 80 150 200 60
R7401 With Lens 300 to 650 420 Bialkali Borosilicate glass 40 70 8 — 62
R7402 300 to 850 400 Multialkali 80 150 — 200 60

(c): Measured at a gain of 106

(a): Measured at 254 nm.

(d): Do not apply the maximum supply voltage for more than 30 seconds continuously.

(b): Measured after a 30-minute storage in darkness.

Figure 1: Typical Spectral Response (Solar Blind)

Figure 2: Typical Spectral Response (Bialkali)

PDF page 2 diagram

WAVELENGTH (nm)

Figure 3: Typical Spectral Response (Multialkali)

PDF page 2 diagram

WAVELENGTH (nm)

WAVELENGTH (nm)

Figure 4: Typical Gain Characteristics

PDF page 2 diagram

SUPPLY VOLTAGE (V)

Page 3

PDF page 3 diagram

(e): The output current averaged over 30 seconds should not exceed 0.1 mA.

Figure 5: Typical Gain Characteristics

PDF page 3 diagram

SUPPLY VOLTAGE (V)

Figure 7: Anode Dark Current (v.s. Temperature)

PDF page 3 diagram

TEMPERATURE (°C)

Figure 6: Anode Dark Current (v.s. Supply Voltage)

PDF page 3 diagram

SUPPLY VOLTAGE (V)

Page 4

Figure 8: Transmittance of Lens

PDF page 4 diagram

WAVELENGTH (nm)

Figure 10: Lens Effect

R7401

TPMHB0461EB

PDF page 4 diagram

WAVELENGTH (nm)

Figure 9: Lens Effect

PDF page 4 diagram

MEASUREMENT CONDITIONS WAVELENGTH : 400 nm SUPPLY VOLTAGE : -800 V A 1 mm diameter spot light (parallel light) is scanned at the center of the photocathode in X and Y directions.

TPMHC0153EA

R7402

PDF page 4 diagram

WAVELENGTH (nm)

Parallel light : Parallel Light: from a 40 mm diameter parallel light source insuring uniform intensity over the entire active area of the photomultiplier tube.

Diffused light: Diffused light: from a 40 mm diameter parallel light source and a diffuser placed 10cm from the detector. The entire active area of the PMT is exposed.

Page 5

Figure 11: Dimensional Outline and Basing Diagram (Unit: mm)

PDF page 5 diagram

TPMHA0410EC

3R7401, R7402, R7401P

INSULATION COVER (Polyoxymethylene)

PDF page 5 diagram

Side View

Bottom View

TPMHA0415EC

Page 6

ACCESSORIES OPTION

Socket E678-12M

PDF page 6 diagram
PDF page 6 diagram

4.2 3.2

Top View

Side View

TACCA0059EC

D Type Socket Assemblies E5770/E5780

The E5770 and E5780 are compact socket assemblies incorporating a voltage divider circuit comprised of resistors

and capacitors. These socket assemblies are designed to provide the output signal directly from the anode of the metal package photomultiplier tube.

Type No. Grounded Electrode Divider Resistance (Total) Maximum Linear Output of Photomultiplier Tube (DC Mode) Output Signal
Cathode Grounded Anode Grounded
E5770 Anode/Cathode 2.8 MΩ 13 µA Pulse DC/Pulse
E5780 Anode — DC/Pulse

\* When the E5770 is used with the anode at a positive high voltage, the negative high voltage (-HV) terminal should be grounded and a positive high voltage applied to the ground terminal. In this arrangement, a high voltage differential is generated between the output and an external amplifier, so use a decoupling capacitor that can withstand a high voltage. \*\* In the E5780, the shield of the signal output cable is connected to the grounded cable, so the E5780 can be used only for negative high voltage operation. Consult our sales office when the E5780 is needed for positive high voltage operation.

PC-board Mounting Type E5770

Cable Output Type E5780

PDF page 6 diagram
PDF page 6 diagram

SIGNAL OUT

SIGNAL OUT RG-174/U

GND or +HV

GND: AWG22

R9 C3

(BLACK)

P R9 C3 DY8

C2 R8

C2 R8 DY7

C1

Top View

R7

C1 R7 DY6

R6

PDF page 6 diagram

R6

R5

R5

R4

R4

R3

R3

R2

R2

R1

R1

-HV or GND

-HV: AWG22 (VIOLET)

: 330 kΩ

: 330 kΩ

R9 : 160 kΩ

R9 : 160 kΩ

: 0.01 µF/ 200 V

: 0.01 µF /200 V

For +HV, it will be necessary to use a coupling capacitor between the output and the customer's signal processing

Bottom View

Side View

TACCA0057EF

TACCA0060EC

Page 7

DA Type Socket Assembly C5781

The C5781 is a subminiature socket assembly that incorporates a voltage divider circuit and a low-noise amplifier.

SPECIFICATION of Built-in Amplifier

Parameter Value Unit
Input Voltage for Amplifier ±15 V
Current to Voltage Conversion Factor 1 V/µA
Maximum Output Voltage (with no load resistor) 10 V
Bandwidth (-3 db) DC to 20 kHz Typ.
PDF page 7 diagram

AMPLIFIER

PDF page 7 diagram

+15 V: AWG22 (RED) SIGNAL GND SIGNAL OUT

-15 V: AWG22 (BLUE) POWER SUPPLY GND: AWG22 (BLACK)

PDF page 7 diagram

TACCA0061EC

Compact High Voltage Power Supply Units C4900 Series

The C4900 series is an on-board type high voltage power supply unit, with a design that aims at providing both “compactness and high performance”. The newly developed circuit achieves high performance

and low power consumption. The C4900 series in addition provides enhanced protective functions yet is offered at lower costs.

PDF page 7 diagram

SPECIFICATION

Parameter C4900 C4900-01 C4900-50 C4900-51
Input Voltage +15 V dc +12 V dc +15 V dc +12 V dc
Input Current * A 1 14 mA 15 mA 14 mA 15 mA
2 90 mA 95 mA 90 mA 95 mA
Variable Output Range 0 V to -1250 V 0 V to +1250 V
Maximum Output Current 0.6 mA 0.5 mA 0.6 mA 0.5 mA
Ripple Noise 0.007 % p-p Typ.
Line Regulation * B ±0.01 % p-p Typ.
Load Regulation *C ±0.01 % p-p Typ.

1with no load 2with full load \*A: at maximum output voltage \*B: against ±1 V Change. \*C: against 0 to 100 % Load Change.

Page 8

WARNING: HIGH VOLTAGE

PDF page 8 diagram

RELATED PRODUCTS

PDF page 8 diagram

PATENT: USA 1 (PAT. No. 5410211) PATENT PENDING: JAPAN 12, USA 8, EUROPE 9

HOMEPAGE URL http://www.hamamatsu.com

HAMAMATSU PHOTONICS K.K., Electron Tube Center 314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail: usa@hamamatsu.com Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail: info@hamamatsu.de France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail: infos@hamamatsu.fr

United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road Welwyn Garden City Hertfordshire AL7 1BW, United Kingdom, Telephone: 44-(0)1707-294888, Fax: 44(0)1707-325777 E-mail: info@hamamatsu.co.uk North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 SOLNA, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail: info@hamamatsu.se

TPMH1204E06

Italy: Hamamatsu Photonics Italia: S.R.L.: Strada della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741 E-mail: info@hamamatsu.it

AUG. 2001 IP (1000)