R2368 HAMAMATSU

Document overview

  • PDF pages: 2

Technical content

Page 1

PHOTOMULTIPLIER TUBE

R2368

TRANSMISSION MODE PHOTOCATHODE

Good Spatial Uniformity, Wide Angle of Radiant Input

Multialkali Photocathode

For UV-Visible Spectrophotometers and General Applications

PDF page 1 diagram

R2386 is a 28mm (1-1/8 Inch) diameter, side-on photomultiplier tube having a transmission mode multialkali photocathode. The transmission mode photocathode offers better spatial uniformity and wider angle of radiation input than conventional side-on tubes which have opaque photocathodes (reflection mode photocathode). Also, this type of photocathodes is independent of polarized light. The R2368 has a 9-stage dynode which provides high gain and employs an HA Coating for noise reduction and an "Anti-hysteresis design".

GENERAL

PDF page 1 diagram
Parameter Description/Value Unit
Spectral Response 185 to 850 nm
Wavelength of Maximum Response 420 nm
Photocathode Material Multialkali —
Useful Area (Minimum) 16 × 18 mm
Window Material UV glass —
Dynode Structure Circular-cage —
Number of Stages 9 —
Base JEDEC No. B11-88 —
Suitable Socket E678-11A —
Suitable Socket Assembly E717-05
Direct Interelectrode Capacitance Anode to Last Dynode 1.2 pF
Anode to All Other Electrodes 3.4 pF

Figure 1: Typical Spectral Response TPMSB0148EA 100

MAXIMUM RATINGS (Absolute Maximum Values)

CATHODE RADIANT

Parameter Value Unit
Supply Voltage Anode and Cathode 1250 V
Anode and Last Dynode 250 V
Average Anode Current (NOTE 1) 0.1 mA
Ambient Temperature -80 to +50 °C

SENSITIVITY

10

QUANTUM EFFICIENCY

CHARACTERISTICS (at 25°C)

1

Parameter Min. Typ. Max. Unit
Anode Luminous Sensitivity (NOTE 2, 3) 50 200 — A/lm
Cathode Luminous Sensitivity (NOTE 4) 80 150 — µA/lm
Cathode Red/White Ratio (NOTE 5) — 0.15 — —
Gain (NOTE 2) — 1.3 × 106 — —
Anode Dark Current (NOTE 2) — 5 50 nA
Anode Pulse Rise Time (NOTE 2, 6) — 1.2 — ns
Current Hysteresis (NOTE 7) — 0.1 — %
Voltage Hysteresis (NOTE 7) — 1.0 — %

0.1

0.01 200 400 600 800 1000

WAVELENGTH (nm)

Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. © 1998 Hamamatsu Photonics K.K.

Page 2

PHOTOMULTIPLIER TUBE R2368

Figure 2: Typical Spatial Uniformity

X-Axis

PDF page 2 diagram

DISTANCE FROM CENTER OF

Y

PHOTOCATHODE (mm)

CATHODE ANODE

Figure 3: Dimensional Outline and Basing Diagram

(Unit: mm)

PDF page 2 diagram

DY6

PDF page 2 diagram

DIRECTION OF LIGHT

TPMSA0026EA

HAMAMATSU PHOTONICS K.K., Electoron Tube Center

Y-Axis

PDF page 2 diagram

DISTANCE FROM CENTER OF PHOTOCATHODE (mm)

X SPOT SIZE : 1mm DIA. SUPPLY VOLTAGE: 1000V WAVELENGTH : 400nm

TPMSB0149EA

NOTES

  1. Averaged over any interval of 30 seconds maximum. 2. Supply voltage of 1000 volts is applied between the cathode and the anode using the voltage distribution ratio shown below.
Electrodes K Dy1 Dy2 Dy3 Dy4 Dy5 Dy6 Dy7 Dy8 Dy9 P
Distribution Ratio 1 1 1 1 1 1 1 1 1 1

K: Cathode, Dy: Dynode, P: Anode

  1. The light source is a tungsten filament lamp operated at a distribution temperature of 2856K. The light input is 0.01 microlumen. 4. Under the same conditions as Note 3 except that the light input is 0.01 lumen and 100 volts are applied between the cathode and all other electrodes connected together as an anode. 5. The red/white ratio is the quotiant of the cathode current measured using a red filter (Toshiba R-68) interposed between the light source and the tube by the cathode current measured with the filter removed under the same condition as Note 4. 6. The rise time is the time for the output pulse to rise from 10% to 90% of the peak amplitude when the entire photo-

cathode is illuminated by a delta function light pulse. 7. Hysteresis is a temporary instability in anode current after light and voltage are applied.

Warning-Personal Safety Hazards Electrical Shock — Operating voltage applied to this device presents shock hazard.

314-5, Shimokanzo, Toyooka-village, Iwata-gun, Shizuoka-ken, 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, P. O. Box 6910 Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limted: Lough Point, 2 Gladbeck Way, Windmill Hill, Enfield, Middlesex EN2 7JA, United Kingdom, Telephone: (44)181-367-3560, Fax: (44)181-367-6384

North Europe: Hamamatsu Photonics Norden AB: Färögatan 7, S-164-40 Kista Sweden, Telephone: (46)8-703-29-50, Fax: (46)8-750-58-95 Italy: Hamamatsu Photonics Italia: S.R.L.: Via Della Moia, 1/E, 20020 Arese, (Milano), Italy, Telephone: (39)2-935 81 733, Fax: (39)2-935 81 741

TPMS1043E01 JUN. 1998