PUSB6B ETC

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

105101.R4 3/05 www.protekdevices.com STEERING DIODE / TVS ARRAY COMBO Only One Name Means ProT ek’Tion™ APPLICA TIONS ✔ USB Power & Data Line Protection ✔ RS-422 & RS-485 Network Protection ✔ Computer I/O Ports ✔ Audio/Video Inputs ✔ Microcontroller Interface Protection IEC COMPA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line) FEA TURES ✔ 500 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ ESD Protection > 40 kilovolts ✔ Protects Two (2) I/O Ports and Bus Lines ✔ Available in 2 Voltage Types 3.3V & 5V ✔ ✔ ✔ ✔ ✔ LOW CAPACITANCE: 15pF ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 Package ✔ Weight 70 milligrams (Approximate) ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined By Dot on Top of Package 05101 PIN CONFIGURATION SO-8 /MT49 /MT50 /MT52 /MT56 /MT51 /MT53/MT54/MT55

2 www.protekdevices.com05101.R4 3/05 PUSB3B thru PUSB6B DEVICE CHARACTERISTICS MAXIMUN RATINGS @ 25°C Unless Otherwise Specified Operating Temperature SYMBOL VALUE -55°C to 150°C °C °C-55°C to 150°C UNITS TJ TSTG PARAMETER Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) DEVICE MARKING CODE MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20µs VC @ IPP MAXIMUM CAPACITANCE @0V, 1 MHz Cj(SD) pF PUSB3B PUSB6B PRQ PRR 4.0 6.0 6.0 7.0 12.9V @ 37A 13.2V @ 35A MAXIMUM LEAKAGE CURRENT @VWM ID µA 125 RATED STAND-OFF VOLTAGE VWM VOLTS 3.3 5.25 Note 1: Electrical specifications refer to pins 1 to pin 4 or pin 5 to pin 8.

4 www.protekdevices.com05101.R4 3/05 PUSB3B thru PUSB6B COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProT ek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProT ek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. P ACKAGE OUTLINE & DIMENSIONS ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., PUSB6B-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PUSB6B-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PUSB6B-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06009 A B C D F G J K P R 4.80 3.80 1.35 0.35 0.40

1.27 BSC

0.18 0.10 5.80 0.25 5.00 4.00 1.75 0.49 1.250 0.25 0.25 6.20 0.50 0.189 0.150 0.054 0.014 0.016

0.05 BSC

0.007 0.004 0.229 0.010 0.196 0.157 0.068 0.019 0.049 0.009 0.008 0.244 0.019 DIM MIN MAX MIN MAX MILLIMETERS INCHES P ACKAGE DIMENSIONS NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. -A- P-B- D G 8 5 -T - K C R X 45º J F 0º - 10º 0.010” (0.25 MM) MBM 4 PL 0.010” (0.25 MM) SBM 8 PL T A S P ACKAGE OUTLINE SO-8 0.030” ± 0.005” 0.050” ± 0.005” 0.160” ± 0.005” 0.045” ± 0.005” 0.245” MIN MOUNTING P AD