PTV03010W TI
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
www.ti.com 8-A, 3.3-V INPUT NONISOLATED WIDE-OUTPUT ADJUST SIP MODULE
FEATURES
APPLICATIONS
DESCRIPTION
3.3-V Input Bus High-End Computers and Servers Wide-Output Voltage Adjust 3.3-V Intermediate Bus Architectures (0.8 V to 2.5 Efficiencies up to 93% On/Off Inhibit Prebias Start-Up Undervoltage Lockout Auto-Track Sequencing Output Overcurrent Protection (Nonlatching, Auto-Reset) Operating Temperature: C to C Safety Agency Approvals: UL/cUL 60950, EN60950 VDE (Pending) POLA Compatible The PTV03010W is a ready-to-use nonisolated power module, and part of a new class of complete dc/dc switching regulators from Texas Instruments. These regulators combine high performance with double-sided, surface-mount construction, to give designers the flexibility to power the most complex multiprocessor digital systems using off-the-shelf catalog parts. The PTV03010W series is produced in a 8-pin, single in-line pin (SIP) package. The SIP footprint minimizes board space, and offers an alternate package option for space conscious applications. Operating from a 3.3-V input bus, the series provides step-down conversion to a wide range of output voltages, at up to A of output current. The output voltage can be set to any value over the range, 0.8 V to 2.5 The output voltage is set using a single external resistor. This series includes Auto-Track Auto-Track simplifies the task of supply-voltage sequencing in a power system by enabling the output voltage of multiple modules to accurately track each other, or any external voltage, during power up and power down. Other operating inhibit, and the ability to start up into an existing output voltage or prebias. A nonlatching overcurrent trip protects against load faults. Target multivoltage, multiprocessor systems that incorporate the industry's high-speed microprocessors, bus drivers, and the TMS320 DSP family. Please be aware that an important notice concerning availability, standard warranty, and use in critical sheet. POLA, Auto-Track, TMS320 are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Copyright 2005, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
www.ti.com L O A D Track GND 2, 3 4167 GNDInhibit Track PTV03010 Inhibit VI VI VO V AdjO VO GND C1* 100 Fm (Required) C2* 10 Fm Ceramic (Required) C3* C4* 10 F Ceramic (Optional) m100 Fm (Optional) R SET# 0.05 W (Required) * See the Application Information section for capacitor recommendations. # R is required to adjust the output voltage higher than its lowest value. See the Application Information section for values. SET ABSOLUTE MAXIMUM RATINGS PACKAGE SPECIFICATIONS PTV03010W SLTS241 FEBRUARY 2005 STANDARD APPLICATION ORDERING INFORMATION PTV03010 (Basic Model) Output Voltage Part Number (1) 0.8 V 2.5 V (Adjustable) PTV03010WAH Vertical T/H EVA (1) See the applicable package drawing for dimensions and PC board layout. over operating free-air temperature range unless otherwise noted (1) UNIT V (Track) Track input voltage 0.3 V to V I +0.3 V T A Operating temperature range Over V I range C to C Lead temperature seconds 260 C (2) T stg Storage temperature C to 125 C V (INH) Inhibit input voltage 0.3 V to V I 0.3 V (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) This product is not compatible with surface-mount reflow solder processes. PTV03010W (Suffix AH) Weight 2.5 grams Flammability Meets UL V-O Mechanical shock Per Mil-STD-883D, Method 2002.3, ms, sine, mounted 500 Gs (1) Mechanical vibration Mil-STD-883D, Method 2007.2, Hz 2000 Hz Gs (1) (1) Qualification limit.
www.ti.com ELECTRICAL CHARACTERISTICS PTV03010W SLTS241 FEBRUARY 2005 operating at C free-air temperature, V I 3.3 V O 2.5 100 µ µ µ and I O I O max (unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT I O Output current Natural convection airflow (1) A V I Input voltage range Over I O load range 2.95 3.65 V Set-point voltage tolerance (2) Temperature variation C T A C 0.5% Line regulation Over V I range mV V O Load regulation Over I O range mV Total output variation Includes set-point, line, load, C T A C (2) o Adjust range Over V I range 0.8 2.5 V R SET 2.21 k Ω V O 2.5 V 93% R SET 5.49 k Ω V O 1.8 V 90% η Efficiency I O I O max R SET 8.87 k Ω V O 1.5 V 89% R SET 17.4 k Ω V O 1.2 V 87% R SET 36.5 k Ω V O V 85% Output voltage ripple (pk-pk) 20-MHz bandwidth mV PP I O (trip) Overcurrent threshold Reset, followed by auto-recovery A 1-A/ µ s load step, to 100% I O max, 100 µ F Transient response Recovery time µ s V o over/undershoot 100 mV I IL Input low current Pin to GND 0.13 mA Track control (pin Control slew-rate limit (max) V/ms V I increasing 2.45 2.8 UVLO Undervoltage lockout V V I decreasing 2.2 2.4 V IH Input high voltage V I 0.5 Open (3) Referenced to GND V Inhibit control (pin V IL Input low voltage 0.2 0.6 I IL Input low current Pin to GND 0.24 mA I I (stby) Input standby current Inhibit (pin to GND, Track (pin open mA ƒ S Switching frequency Over V I and I O ranges 550 600 650 kHz Nonceramic (C1) 100 (4) External input capacitance µ F Ceramic (C2) (4) Nonceramic 100 (5) 11,000 (6) Capacitance value µ F External output capacitance Ceramic 300 (C3) Equivalent series resistance (nonceramic) (7) m Ω Per Telcordia SR-332, 50% stress, T A ground MTBF Reliability Hr benign (1) See thermal derating curves for safe operating area (SOA), or consult factory for appropriate derating. (2) The set-point voltage tolerance is affected by the tolerance and stability of R SET The stated limit is unconditionally met if R SET has a tolerance of 1%, with 100 ppm/ C or better temperature stability. (3) This control pin is internally pulled up to the input voltage, V I If this input is left open-circuit, the module operates when input power is applied. A small low-leakage 100 nA) MOSFET is recommended for control. For further information, see the related application note. (4) A 10- µ F high-frequency ceramic capacitor and 100- µ F electrolytic input capacitor are required for proper operation. The electrolytic capacitor must be rated for 300 mArms minimum ripple current. See the Application Information for further guidance on capacitor selection. (5) An external output capacitor is not required for basic operation. Adding 100 µ F of distributed capacitance at the load improves the transient response. (6) This is the calculated maximum. The minimum ESR limitation often results in a lower value. See the Application Information for further guidance. (7) This is the typical ESR for all the electrolytic (nonceramic) output capacitance. Use m Ω as the minimum when using maximum-ESR values to calculate.
www.ti.com TYPICAL CHARACTERISTICS (3.3-V INPUT) (8) (9) 100 0 1 2 3 4 5 6 7 8 Efficiency - % I - Output Current - AO V = 2.5 VO V = 1.5 VO V = 0.8 VO V = 1.2 VO V - Output Ripple V olt age - mV O PP 0 1 2 3 4 5 6 7 8 I - Output Current - AO 1 2 3 4 5 6 7 8 Airflow is parallel to the long axis of the module Temperature Derating- Co I - Output Current - AO
400 LFM
200 LFM
100 LFM
0 .4 0 .8 1.2 1.6 0 1 2 3 4 5 6 7 8 P - Power Dissip ation - W D I - Output Current - AO PTV03010W SLTS241 FEBRUARY 2005 EFFICIENCY OUTPUT VOLTAGE RIPPLE vs vs OUTPUT CURRENT OUTPUT CURRENT Figure Figure POWER DISSIPATION TEMPERATURE DERATING vs vs OUTPUT CURRENT OUTPUT CURRENT Figure Figure (8) The electrical characteristic data has been developed from actual products tested at This data is considered typical for the converter. Applies to Figure Figure and Figure (9) The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. The airflow direction is parallel to the long axis of the module. Derating limits apply to modules soldered directly to a 100 mm x 100 mm double-sided PCB with oz. copper. Applies to Figure
www.ti.com DEVICE INFORMATION PIN 1 PTV03010W SLTS241 FEBRUARY 2005 TERMINAL FUNCTIONS TERMINAL NO. V I The positive input voltage power node to the module, which is referenced to common GND. V O The regulated positive power output with respect to the GND node. This is the common ground connection for the V I and V O power connections. It is also the 0-Vdc reference for the GND control inputs. The Inhibit pin is an open-collector/drain, active-low input that is referenced to GND. Applying a low-level ground signal to this input disables the module output and turns off the output voltage. When the Inhibit control is active, Inhibit the input current drawn by the regulator is significantly reduced. If the inhibit feature is not used, the control pin is left open-circuit. The module then produces an output voltage whenever a valid input source is applied. A resistor must be connected directly between this pin and GND (pin is recommended) to set the output voltage of the module higher than its lowest value. The temperature stability of the resistor should be 100 ppm/ C (or better). The set-point range is 0.8 V to 2.5 The resistor value is calculated using a formula. If this input is left V o Adjust open-circuit, the output voltage defaults to its lowest value. For further information, see the related application note. The specification table gives the standard resistor values for a number of common output voltages. This is an analog control input that enables the output voltage to follow an external voltage. This pin becomes active typically ms after the input voltage has been applied, and allows direct control of the output voltage from V up to the nominal set-point voltage. Within this range, the output follows the voltage at the Track pin on a volt-for-volt basis. When the control voltage is raised above this range, the module regulates at its set-point Track voltage. The feature allows the output voltage to rise simultaneously with other modules powered from the same input bus. If unused, this input should be connected to V I NOTE: Due to the undervoltage lockout feature, the output of the module cannot follow its own input voltage during power up. See the related Application Information for further guidance. Front View of Module Figure Pin Terminal Locations
www.ti.com APPLICATION INFORMATION Capacitor Recommendations for the PTV03010W Power Module Input Capacitors Output Capacitor (Optional) Ceramic Capacitors Tantalum Capacitors Capacitor Table PTV03010W SLTS241 FEBRUARY 2005 The required input capacitors are a 10- µ F ceramic and a minimum of 100- µ F electrolytic type. The 100- µ F capacitance must be rated for 300 mArms ripple current capability. See Table The above ripple current requirements are conditional that the 10- µ F ceramic capacitor is present. The 10- µ F X5R/X7R ceramic capacitor is necessary to reduce both the magnitude of ripple current through the electroytic capacitor and the amount of ripple current reflected back to the input source. Ceramic capacitors should be located within 0.5 inch. (1,3 cm) of the module's input pins. Additional ceramic capacitors can be added to reduce the RMS ripple current requirement for the electrolytic capacitor. Ripple current (Arms) rating, less than 150-m Ω equivalent series resistance (ESR), and temperature are the major considerations when selecting input capacitors. Unlike polymer-tantalum capacitors, regular tantalum capacitors have a recommended minimum voltage rating of (max. dc voltage ac ripple). This is standard practice to ensure reliability. Only a few tantalum capacitors were found to have sufficient voltage rating to meet this requirement. At temperatures below the ESR of aluminum electrolytic capacitors increases. For these applications, Os-Con, polymer-tantalum, and polymer-aluminum types should be considered. For (sudden changes in load current), regulator response benefits from external output capacitance. The recommended output capacitance of 100 µ F allows the module to meet its transient response specification. For most applications, a high-quality computer-grade aluminum electrolytic capacitor is adequate. These capacitors provide decoupling over the frequency range, kHz to 150 kHz, and are suitable when ambient temperatures are above For operation below tantalum-, ceramic-, or Os-Con-type capacitors are recommended. When using one or more nonceramic capacitors, the calculated ESR should be no lower than m Ω m Ω using the manufacturer's maximum ESR for a single capacitor). A list of preferred low-ESR-type capacitors are identified in Table Above 150 kHz, the performance of aluminum electrolytic capacitors is less effective. Multilayer ceramic capacitors have low ESR and a resonant frequency higher than the bandwidth of the regulator. They can be used to reduce the reflected ripple current at the input as well as improve the transient response of the output. When used on the output, their combined ESR is not critical as long as the total value of ceramic capacitance does not exceed approximately 300 µ Also, to prevent the formation of local resonances, do not place more than five identical ceramic capacitors in parallel with values of µ F or greater. Tantalum-type capacitors can only be used on the output bus, and are recommended for TPS, Sprague 593D/594/595, and Kemet T495/T510 capacitor series are suggested over many other tantalum types due to their higher rated surge, power dissipation, and ripple current capability. As a caution, many general-purpose tantalum capacitors have considerably higher ESR, reduced power dissipation, and lower ripple current capability. These capacitors are also less reliable as they have reduced power dissipation and surge current ratings. Tantalum capacitors that have no stated ESR or surge current rating are not recommended for power applications. When specifying Os-con and polymer tantalum capacitors for the output, the minimum ESR limit is encountered before the maximum capacitance value is reached. Table identifies the characteristics of capacitors from a number of vendors with acceptable ESR and ripple current (rms) ratings. The recommended number of capacitors required at both the input and output buses is identified for each capacitor type.
www.ti.com Designing for Fast Load Transients PTV03010W SLTS241 FEBRUARY 2005 APPLICATION INFORMATION (continued) Note: This is not an extensive capacitor list. Capacitors from other vendors are available with comparable specifications. Those listed are for guidance. The RMS ripple current rating and ESR (at 100 kHz) are critical parameters necessary to ensure both optimum regulator performance and long capacitor life. The transient response of the dc/dc converter has been characterized using a load transient with a di/dt of µ The typical voltage deviation for this load transient is given in the data sheet specification table using the optional value of output capacitance. As the di/dt of a transient is increased, the response of a converter regulation circuit ultimately depends on its output capacitor decoupling network. This is an inherent limitation with any dc/dc converter once the speed of the transient exceeds its bandwidth capability. If the target application specifies a higher di/dt or lower voltage deviation, the requirement can only be met with additional output capacitor decoupling. In these cases, special attention must be paid to the type, value, and ESR of the capacitors selected. If the transient performance requirements exceed that specified in the data sheet, or the total amount of load capacitance is above 3000 µ the selection of output capacitors becomes more important. Table Input/Output Capacitors Capacitor Characteristics Quantity Max ESR Max Ripple Capacitor Vendor, Vendor Working Optional Value at 100 Current at Physical Size Input Type/Series (Style) Part Number Voltage Output µ kHz C (Irms) (mm) Bus (V) Bus Ω (mA) Panasonic, Aluminum 330 0.117 555 11,5 EEUFC1A331 WA(SMD) 6.3 150 0.035 3050 6,9 EEFWA0J151P FK (SMD) 6.3 470 0.16 600 10,2 EEVFK0J471P United Chemi-Con PSA,Poly- Aluminum 6.3 220 0.02 3160 6,3 9,8 PSA6.3VB220MF11 (Radial) LXZ, Aluminum (Radial) 470 0.12 555 125 LXZ10VB471M8X12LL MVZ, Auminum-(SMD) 680 0.09 670 MVZ16VC681MJ10TP PXA, Poly-Aluminum 120 0.027 2800 6,7 PXA10VC121MH70TP (SMD) Nichicon, Aluminum 270 0.09 575 12,5 UPM1C271MHH6 HD (Radial) 470 0.072 760 11,5 UHD1A471MPR Sanyo TP, Poscap 220 0.025 2400 7,3 L 4,3 W (1) 10TPE220M SP, Os-Con 6.3 120 0.035 >1900 6,3 6,8 6SP120M SVP, Os-Con (SMD) 6.3 100 0.04 1810 6,3 6SVP100M AVX, Tantalum, Series 100 0.075 >1090 TPSC107M010R0075 7,3 L 5,7 W III 4,1 H TPS (SMD) 150 0.05 >1559 TPSD157M010R0050 Kemet (SMD) T520, Poly-Tant 100 0.055 1500 T520D107M010ASE055 4,3 W 7,3 L H T530, Poly-Tant/Organic 330 0.01 >3800 T530X337M010ASE010 Vishay-Sprague 94SVP, 120 0.04 2120 94SVP127X0010E7 Os-Con (SMD) 595D, Tantalum (SMD) 220 0.14 1040 7,5 L 4,3 W 595D227X0010D2T 4,1 H 94SA, Os-Con (Radial) 100 0.03 2670 10,5 94SA107X0010EBP Kemet, Ceramic X5R 0.002 3225 (2) C1210C106M4PAC (SMD) 6.3 0.002 3225 (2) C1210C226K9PAC 6.3 0.002 3225 (2) C1210C476K9PAC (1) N/A (2) Ceramic capacitors are required to complement electrolytic types at the input and to reduce high-frequency ripple current.
www.ti.com Adjusting the Output Voltage R = 10 k xSET W 0.8 V V - 0.8 VO = 2.49 kW (1) PTV03010W SLTS241 FEBRUARY 2005 APPLICATION INFORMATION (continued) Table Input/Output Capacitors (continued) Capacitor Characteristics Quantity Max ESR Max Ripple Capacitor Vendor, Vendor Working Optional Value at 100 Current at Physical Size Input Type/Series (Style) Part Number Voltage Output µ kHz C (Irms) (mm) Bus (V) Bus Ω (mA) Murata, Ceramic X5R 6.3 100 0.002 3225 (2) GRM32ER60J107M (SMD) 6.3 (2) GRM32ER60J476M (2) GRM32ER61C226K (2) GRM32DR61C106K TDK, Ceramic X5R 6.3 100 0.002 3225 (2) C3225X5R0J107MT (SMD) 6.3 (2) C3225X5R0J476MT (2) C3225X5R1C226MT (2) C3225X5R1C106MT The V O Adjust control (pin sets the output voltage of the PTV03010W product to a value over the range, 0.8 V to 2.5 The adjustment method requires the addition of a single external resistor, R SET that must be connected directly between the V O Adjust and the regulator's output GND (pin is recommended). Without an adjust resistor, the output voltage is set to its lowest value. Table gives the preferred value of the external resistor for a number of standard voltages, along with the actual output voltage that this resistance value provides. Figure shows the placement of the required resistor. Table Nearest Standard Values of R SET for Common Output Voltages V O R SET V O (Required) (Standard Value) (Actual) 2.5 V 2.21 k Ω 2.502 V V 4.12 k Ω 2.010 V 1.8 V 5.49 k Ω 1.803 V 1.5 V 8.87 k Ω 1.504 V 1.2 V 17.4 k Ω 1.202 V V 36.5 k Ω 1.005 V 0.8 V Open 0.800 V For other output voltages, the value of the required resistor can either be calculated or simply selected from the range of values given in Table Equation may be used for calculating the adjust resistor value.
www.ti.com PTV03010W GND GND GND V AdjO VO CO VO R , 1%SET PTV03010W SLTS241 FEBRUARY 2005 Figure V O Adjust Resistor Placement Table Calculated Values of R SET for Other Output Voltages V O R SET V O R SET 0.800 Open 1.450 9.82 k Ω 0.825 318 k Ω 1.500 8.94 k Ω 0.850 158 k Ω 1.550 8.18 k Ω 0.875 104 k Ω 1.600 7.51 k Ω 0.900 77.5 k Ω 1.650 6.92 k Ω 0.925 61.5 k Ω 1.700 6.40 k Ω 0.950 50.8 k Ω 1.750 5.93 k Ω 0.975 43.2 k Ω 1.800 5.51 k Ω 1.000 37.5 k Ω 1.850 5.13 k Ω 1.025 33.1 k Ω 1.900 4.78 k Ω 1.050 29.5 k Ω 1.950 4.47 k Ω 1.075 26.6 k Ω 2.000 4.18 k Ω 1.100 24.2 k Ω 2.050 3.91 k Ω 1.125 22.1 k Ω 2.100 3.66 k Ω 1.150 20.4 k Ω 2.150 3.44 k Ω 1.175 18.8 k Ω 2.200 3.22 k Ω 1.200 17.5 k Ω 2.250 3.03 k Ω 1.225 16.3 k Ω 2.300 2.84 k Ω 1.250 15.3 k Ω 2.350 2.67 k Ω 1.300 13.5 k Ω 2.400 2.51 k Ω 1.350 12.1 k Ω 2.450 2.36 k Ω 1.400 10.8 k Ω 2.500 2.22 k Ω
www.ti.com Nonisolated, Wide-Output Adjustable Power Modules POLA Compatibility Soft-Start Power Up 3.3 V 100 Fm 100 Fm GND GND 1.8 V RSET 5.49 k 1%, 0.05 W W C 2 10 Fm PTV03010W Track VI VO GND AdjustGND L O A D t -Time = 5 ms/div I (5 A/div)I V (1 V/div)O V (2 V/div)I PTV03010W SLTS241 FEBRUARY 2005 The PTH/PTV family of nonisolated, wide-output adjustable power modules from Texas Instruments are optimized for a flexible, high-performance module that is small in size. Each of these products are POLA compatible. POLA-compatible products are produced by a number of manufacturers, and offer customers advanced, nonisolated modules with the same footprint and form factor. POLA parts are also ensured to be interoperable, which provides customers with a second-source option. The Auto-Track feature allows the power up of multiple PTH/PTV modules to be directly controlled from the Track pin. However, in a stand-alone configuration, or when the Auto-Track feature is not being used, the Track pin is directly connected to the input voltage, V I (see Figure Figure Power-Up Application Circuit When the Track pin is connected to the input voltage, the Auto-Track function is permanently disengaged. This allows the module to power up entirely under the control of its internal soft-start circuitry. When power up is under soft-start control, the output voltage rises to the set-point at a quicker and more linear rate. Figure Power-Up Waveform
www.ti.com Overcurrent Protection (OCP) Output On/Off Inhibit VI L O A D 1 = Inhibit GND GND VO BSS138 RSET 2.21 kW C1 C3C2 PTV03010WVI VO GND GNDInhibit V AdjO Track PTV03010W SLTS241 FEBRUARY 2005 From the moment a valid input voltage is applied, the soft-start control introduces a short time delay (typically ms to ms) before allowing the output voltage to rise. The output then progressively rises to the module set-point voltage. Figure shows the soft-start power-up characteristic of the PTV03010W, operating from a 3.3-V input bus and configured for a 1.8-V output. The waveforms were measured with a 5-A resistive load and the Auto-Track feature disabled. The initial rise in input current when the input voltage first starts to rise is the charge current drawn by the input capacitors. Power up is complete within ms. For protection against load faults, the modules incorporate output overcurrent protection. Applying a load that exceeds the overcurrent threshold causes the regulated output to shut down. Following shutdown, a module periodically attempts to recover by initiating a soft-start power up. This is described as a hiccup mode of operation, whereby the module continues in the cycle of successive shutdown and power up until the load fault is removed. During this period, the average current flowing into the fault is significantly reduced. Once the fault is removed, the module automatically recovers and returns to normal operation. For control, the modules incorporate an output Inhibit control pin. The inhibit feature can be used wherever there is a requirement for the output voltage from the regulator to be turned off. The power modules function normally when the Inhibit input is left open-circuit, providing a regulated output whenever a valid source voltage is connected to V I with respect to GND. Figure shows the typical application of the inhibit function. Note the discrete transistor (Q1). The Inhibit input has its own internal pullup (see footnotes to electrical characteristics table). The input is not compatible with TTL logic devices. An open-collector (or open-drain) discrete transistor is recommended for control. Figure On/Off Inhibit Application Circuit Turning on applies a low voltage to the Inhibit control and disables the output of the module. If is then turned off, the module executes a soft-start power-up sequence. A regulated output voltage is produced within ms. Figure shows the typical rise in both the output voltage and input current, following the turnoff of Q1. The turnoff of corresponds to the rise in the waveform, V DS The waveforms were measured with a 5-A constant current load.
www.ti.com t - Time = 5 ms/div V (1 V/div)O I (5 A/div)I Q1 V (5 V/div)DS Auto-Track Function PTV03010W SLTS241 FEBRUARY 2005 Figure 10. Inhibit Waveform The Auto-Track function is unique to the PTH/PTV family, and is available with all POLA products. Auto-Track was designed to simplify the amount of circuitry required to make the output voltage from each module power up and power down in sequence. The sequencing of two or more supply voltages during power up is a common requirement for complex mixed-signal DSPs, microprocessors, and ASICs. How Auto-Track Works Auto-Track works by forcing the module output voltage to follow a voltage presented at the Track control pin (1) This control range is limited to between V and the module set-point voltage. Once the track-pin voltage is raised above the set-point voltage, the module output remains at its set-point (2) As an example, if the Track pin of a 2.5-V regulator is at the regulated output is If the voltage at the Track pin rises to the regulated output does not go higher than 2.5 When under Auto-Track control, the regulated output from the module follows the voltage at its Track pin on a volt-for-volt basis. By connecting the Track pin of a number of these modules together, the output voltages follow a common signal during power up and power down. The control signal can be an externally generated master ramp waveform, or the output voltage from another power supply circuit (3) For convenience, the Track input incorporates an internal RC-charge circuit. This operates off the module input voltage to produce a suitable rising waveform at power up. Typical Application The basic implementation of Auto-Track allows for simultaneous voltage sequencing of a number of Auto-Track compliant modules. Connecting the Track control pins of two or more modules forces the Track control of all modules to follow the same collective RC-ramp waveform, and allows them to be controlled through a single transistor or switch. See in Figure To initiate a power-up sequence, it is recommended that the Track control first be pulled to ground potential. This is done at or before input power is applied to the modules, and then held for at least ms thereafter. This brief period gives the modules time to complete their internal soft-start initialization. Applying a logic level high signal to the circuit On/Off Control turns on and applies a ground signal to the Track input of the modules. After completing their internal soft-start intialization, the output of all modules remains at zero volts while is on. may be turned off ms after a valid input voltage has been applied to the modules. This allows the track control voltage to automatically rise to the module input voltage. During this period, the output voltage of each module rises in unison with other modules to its respective set-point voltage.
www.ti.com C5 C6 V 1 = 2.5 VO V 2 = 1.5 VO 3.3 V 0 V On/Off Control 1 = Power Down 0 = Power Up BSS138 C2 C3 0.1 µF 100 kW 2.21 kW 8.87 kW PTV03020W Track VI VO GND Sense AdjustGND 7PTV03010WVI GNDInhibit Inhibit V AdjO Track VO PTV03010W SLTS241 FEBRUARY 2005 Figure shows the output voltage waveforms from the circuit of Figure after the On/Off Control is set from a high-level to a low-level voltage. The waveforms, V O and V O represent the output voltages from the two power modules, (2.5 and (1.5 V), respectively. V O and V O are shown rising together to produce the desired simultaneous power-up characteristic. The same circuit also provides a power-down sequence. Power down is the reverse of power up, and is accomplished by lowering the track control voltage back to zero volts. The important constraint is that a valid input voltage must be maintained until the power down is complete. It also requires that be turned off slowly. This is so that the track control voltage does not fall faster than Auto-Track slew rate capability, which is V/ms. The components and in Figure limit the rate at which pulls down the track control voltage. The values of 100 k Ω and 0.1 µ F correlate to a decay rate of about 0.17 V/ms. The power-down sequence is initiated with a low-to-high transition at the On/Off Control input to the circuit. Figure shows the power-down waveforms. As the Track control voltage falls below the nominal set-point voltage of each power module, then its output voltage decays with all the other modules under Auto-Track control. Notes on Use of Auto-Track The Track pin voltage must be allowed to rise above the module set-point voltage before the module regulates at its adjusted set-point voltage. The Auto-Track function tracks almost any voltage ramp during power up, and is compatible with ramp speeds of up to V/ms. The absloute maximum voltage that may be applied to the Track pin is the input voltage V I The module cannot follow a voltage at its track control input until it has completed its soft-start initialization. This takes about ms from the time that a valid voltage has been applied to its input. During this period, it is recommended that the Track pin be held at ground potential. The module is capable of both sinking and sourcing current when following a voltage at its Track input. Therefore, start up into an output prebias cannot be supported when a module is under Auto-Track control. Note: A prebias holdoff is not necessary when all supply voltages rise simultaneously under the control of Auto-Track. The Auto-Track function is disabled by connecting the Track pin to the input voltage I When Auto-Track is disabled, the output voltage rises at a quicker and more linear rate after input power has been applied. Figure 11. Sequenced Power Up and Power Down Using Auto-Track
www.ti.com t - Time = 10 ms/Div V 1 (1 V/Div)O V 2 (1 V/Div)O On/Off Input (5 V/Div) t -Time = 10 ms/Div On/Off Input (5 V/Div) V 2 (1 V/Div)O V 1 (1 V/Div)O Prebias Start-Up Capability PTV03010W SLTS241 FEBRUARY 2005 Figure 12. Simultaneous Power Up With Auto-Track Figure 13. Simultaneous Power Down With Auto-Track Control Control A prebias start-up condition occurs as a result of an external voltage being present at the output of a power module prior to its output becoming active. This often occurs in complex digital systems when current from another power source is backfed through a dual-supply logic component, such as an FPGA or ASIC. Another path might be via clamp diodes, sometimes used as part of a dual-supply power-up sequencing arrangement. A prebias can cause problems with power modules that incorporate synchronous rectifiers. This is because under most operating conditions, such modules can sink as well as source output current. The PTH/PTV modules incorporate synchronous rectifiers but do not sink current during start-up, or whenever the Inhibit pin is held low. Start-up includes an initial delay (approximately ms), followed by the rise of the output voltage under the control of the module internal soft-start mechanism; see Figure Conditions for Prebias Holdoff In order for the module to allow an output prebias voltage to exist (and not sink current), certain conditions must be maintained. The module holds off a prebias voltage when the Inhibit pin is held low, and whenever the output is allowed to rise under soft-start control. Power up under soft-start control occurs on the removal of the ground signal to the Inhibit pin (with input voltage applied), or when input power is applied with Auto-Track disabled (1) To further ensure that the regulator does not sink output current (even with a ground signal applied to its Inhibit the input voltage must also be greater than the applied prebias source, throughout the power-up sequence (2) The soft-start period is complete when the output begins rising above the prebias voltage. The module then functions as normal, and sinks current if a voltage higher than its set-point value is applied to its output. Note: If a prebias condition is not present, the soft-start period is complete when the output voltage has risen to either the set-point voltage, or the voltage applied at the module Track control pin, whichever is lowest, to its output. Demonstration Circuit Figure shows the start-up waveforms for the demonstration circuit shown in Figure The initial rise in V O is the prebias voltage, which is passed from the VCCIO to the VCORE voltage rail through the ASIC. Note that the output current from the module O is negligible until its output voltage rises above the applied prebias.
www.ti.com t - Time = 10 ms/div V (1 V/div)I V (1 V/div)O Start-up Period t - Time = 10 ms/div V (1 V/div)I V 1 (1 V/div)O I (5 A/div)O V = 1.5 VO V = 3.3 VI R 8.87 k SET W ASIC VCORE VCCIO IO PTV03010W Track VI VO GNDGND Vadj CI CO PTV03010W SLTS241 FEBRUARY 2005 Figure 14. PTV03010W Start-Up Figure 15. Prebias Start-Up Waveforms NOTES: The prebias start-up feature is not compatible with Auto-Track. If the rise in the output is limited by the voltage applied to the Track control pin, the output sinks current during the period that the track control voltage is below that of the back-feeding source. For this reason, Auto-Track should be disabled when not being used. This is accomplished by connecting the Track pin to the input voltage, V I This raises the Track pin well above the set-point voltage prior to start-up, which defeats the Auto-Track feature. To further ensure that the regulator output does not sink current when power is first applied (even with a ground signal applied to the Inhibit control input), the input voltage must always be greater than the applied prebias source. This condition must exist throughout the power-up sequence of the power system. Figure 16. Application Circuit Demonstrating Prebias Start-Up
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) PTV03010WAH ACTIVE SIP MOD ULE EVA 8 70 TBD Call TI Level-1-235C-UNLIM (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 19-Aug-2005 Addendum-Page 1
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated