PT65 ETC2

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

APEM www.apem.com F-5 PT65 series Rotary code switches Through-hole F PT65 SERIES Actuators

1 Screwdriver

3 Spindle

5 Segment wheel

7 Accessories

(none) Straight L254 Right angle, spacing 2,54 (.100) L508 Right angle, spacing 5,08 (.200) Codes

01 BCD

02 BCD complement

03 Hexadecimal

06 Hexadecimal complement

  • Operating voltage : 24 VDC max.
  • Contact load, static : 400mA max.
  • Contact load, dynamic : 150mA max.
  • Initial contact resistance : 80 mΩ max.
  • Insulation resistance : 100 MΩ min. MECHANICAL AND THERMAL SPECS
  • Torque : 0,7 Ncm min.
  • Expected life : 10.000 cycles min.
  • Operating temperature : -20°C to +70°C SOLDER RECOMMENDATIONS (DIN CEI 68-2-20)
  • Manual soldering : 340°C max.for 2 seconds max.
  • Wave soldering : 260°C max. for 10 seconds max. DIMENSIONS Screwdriver slot, straight terminals MATERIALS
  • Base : UL94-V0, high temperature thermoplastic
  • Cover : UL94-V0, high temperature thermoplastic, grey
  • Actuator : PA 4.6 nylon
  • Contacts : gold over nickel plated phosphor bronze
  • Terminals : tin plated PACKAGING
  • Switches for screwdriver slot or accessory actuation (PT651 and PT657) : tubes of 50 pieces
  • Switches with spindle (PT653) or segment wheel (PT655) : candy trays of 50 pieces
  • Accessories : bags of 50 pieces Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. (.256) 2.20 (.087) 6.50 0.55 (.022) 10.00 4.00 3.20 (.157) 10.00 (.393) 6 45 (.393) 29 1 (.126) 4.00 0.27 (.011) 7.62 (.300) (.157) 0.20 (.008) (.100) 2.54 CC ❑❑ 4 actuator types ❑ Save board space ❑ Highly reliable ❑ Solder and flux sealed, washable CR65 series, with a blue case,outside the US and the UK. UG1006-A

F-6 APEM www.apem.com PT65 series Rotary code switches Through-hole F L508 Right angle spacing 5,08 (.200) L254 Right angle spacing 2,54 (.100) (none) Straight (.300) (.100) 7.62 2.54 2.54 (.100) 7.62 (.300) 542 3 8 7 Ø1.00 (.039 DIA) (.100) (.100) 2.54(.100) 2.54 2.54 (.100) 2.54 32 4 9 678 (.039 DIA) Ø1.00 5.08 (.200) (.100) 2.54 2.54 (.100) 5.08 4321 69 78 (.200) (.039 DIA) Ø1.00

3 Spindle (grey) 5 Segment wheel (grey) 7 Accessories

C

  • • •
  • •
  • • •
  • •
  • •
  • •
  • •
  • • •
  • •
  • • 6 6
  • •
  • •
  • • •
  • • A B C D E F
  • • •
  • •
  • • •
  • •
  • • •
  • •
  • •
  • • 1 2 4 8
  • •
  • •
  • • • A B C D E F (.157) 3.20 (.126)1 4.00 (.039) 2.85 19 2 67 5 1.00 4.00 (.157) (.112) (.039) 7.30 (.039) 1.00 1.00 (.287) (.303) (.374) 7.70 2.80 (.039) 9.50 4.40 (.173) 3.50 (.138) (.041) 1.05 (.041) 3.20 (.126) 7 5 1.05

APEM www.apem.com F-7 PT65 series Rotary code switches Through-hole F ACCESSORIES ADAPTED TO YOUR APPLICATIONS Basic model PT65 7 has been designed to accept different actuators with snap-in connection. According to your application, you can choose between spindles or plastic knobs in two different lengths and a Ø 17 mm (.669) knurled wheel for lateral marking. Standard colours are shown below. Special colours are also available on request. STANDARD PRODUCTS MODELS CODES BCD BCD complement Hexadecimal Hexadecimal complem. FOR SCREWDRIVER Upper actuation PT65101 PT65102 PT65103 PT65303 PT65503 PT65303L254 -PT65103L254 PT65103L508 PT65106 - - - - - Side actuation PT65101L254 PT65101L508 - - - - PT65502 - - Upper actuation PT65301 PT65501 - PT65701 Upper actuation Side actuation Upper actuation WITH SPINDLE WITH SEGMENT WHEEL FOR ACCESS. SPINDLES Length 11,6 mm (standard) Length 13,3 mm P/N U4822 U4824 U4832 COLOURS black grey black PLASTIC KNOBS Length 5,3 mm (standard) Length 15,7 mm Length 4,4 mm ( P/N U4906 U4916 U4941 U4943 U4944 U4945 U4946 COLOURS red red blue green grey yellow red KNURLED WHEEL (unmarked - marking on request) P/N U4847/1 COLOUR white/black ➞ Panel (.157) 4.00 1.00 (.039) (.039) 1.00 (.524) 13.3011.60 (.457) (.413) 10.50 (.240) 6.10 (.122) 3.10 (.209) 5.30 15.70 (.618) (.083) 2.10 (.122) (.161) 3.10 4.10 1.00 (.039) 1.00 (.039) 2.80 (.110) Ø9.50 (.473 DIA) (.138) 3.50 4.40 (.173) 7.70 (.303) 17.00 (.669) (.283) 7.20 1.80 (.071) 3.10 (.122) 9.60 (.378) (.300) 7.62