PT500 LAMBDA
Document overview
- PDF pages: 1
Technical content
Page 1
PT-SERIES DC-DC transformer module 500W

m Model name
PT 500-48
Output voltage
Name of series Output power
m Features
marking (Low Voltage Directive) v DC-DC transformer module Converts DC360V ~ DC48V or DC66V by connecting with PFHC module “PF-A series”.
Battery backup system N + 1 redundant system v Wide baseplate temperature: –20 ~ +85°C Conduction cooling v 2 year warranty
m Specifications
| 01. Input voltage range | 360VDC52% (Connected to output of PFHC module “PF-A series”) |
| 02. Nominal output voltage | PT500-48: DC48V, PT500-66: DC66V |
| 03. Output voltage range | Fixed/PT500-48: DC43 ~ 53V, PT500-66: DC61 ~ 71V |
| 04. Max. output current/power | PT500-48: 11A 500W, PT500-66: 8A 500W |
| 05. Efficiency (typ) | 93% at full load |
| 06. Load regulation | 10V no load to full load |
| 07. Parallel operation | N+1 redundant operation. Output current balancing |
| 08. Cooling | Conduction cooling (Heatsink & airflow has to be chosen according to instruction manual) |
| 09. Operating ambient temperature | Baseplate temperature: –20 ~ +85°C (output derating is different according to condition) Ambient temperature: above –20°C |
| 10. Withstand voltage | Input to output: 3.0kVAC, Input to baseplate: 2.5kVAC for 1 min. |
| 11. Safety standard | Approved by UL1950 , CSA950(C-UL) and EN60950(BSI) |
| 12. Functions | Over voltage protection, Over current protection, Thermal protection, ON/OFF control (CNT terminal), Inverter good signal (IOG terminal) |
m Product lineup
| Model | Nominal output voltage | Output voltage range (no load - full load) | Nominal input voltage range | Max. output Max. current po | output wer | UL | CSA | EN |
|---|---|---|---|---|---|---|---|---|
| PT500-48 | 48VDC | 43 ~ 53VDC | 360VDC ± 2% Use PFHC module “PF500A-360 or PF1000A-360” together. | 11A 5 8A 5 | 00W | V | V | V |
| PT500-66 | 66VDC | 61 ~ 71VDC | 00W | V | V | V |
Note:
V : Safety standard approved
The above specified value is on condition with external components attached. Filtering capacitor and external fuse at input line are required as external components.
m Block diagram

Note: v Request customer specification for further details of specifications, outline, characteristics, etc. Read the instruction manual before usage. v Contact us about delivery before ordering.
m Appearance drawings

current and country of manufacture are shown here. Note 2: Input & output terminal 4-ø2 2-ø0.6