PSMDA05C-4 ETC1

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

105083.R2 9/03 www.protekdevices.com ST ANDARD CAP ACIT ANCE TVS ARRAY Only One Name Means ProT ek’Tion™

APPLICATIONS

✔ RS-232 & RS-423 Data Lines ✔ Cellular Phones ✔ Audio/Video Inputs ✔ Portable Electronics ✔ Wireless Network Systems IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-Gnd) & Level 3(Line-Line)

FEATURES

✔ 500 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Bidirectional Configurations ✔ Monolithic Design ✔ Available in Voltage Types Ranging From: 5V to 24V ✔ Protects Up to Four (4) Lines ✔ ESD Protection > 40 kilovolts MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 Package ✔ Weight 15 milligrams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined By Dot on Top of Package 05083 PIN CONFIGURATION SO-8 /MT49 /MT50 /MT52 /MT56 /MT51 /MT53/MT54/MT55

2 www.protekdevices.com05083.R2 9/03 PSMDA05C-4 thru PSMDA24C-4 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified Operating Temperature SYMBOL VALUE -55°C to 150°C° C °C-55°C to 150°C UNITS TJ TSTG PARAMETER Storage Temperature Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Note 1: Test individual pins 8 or 5 to pins 1, 2, 3, or 4. Pins 6 and 7 are open. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (See Note 1) DEVICE MARKING CODE MINIMUM BREAKDOWN VOLTAGE @ 1mA V(BR) VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ IP = 1A VC VOLTS MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @8/20µs VC @ IPP MAXIMUM CAP ACITANCE PER LINE @0V , 1 MHz C pF PSMDA05C-4 PSMDA12C-4 PSMDA15C-4 PSMDA24C-4 TEB TED TEF TEH 6.0 13.3 16.7 26.7 9.8 19.0 24.0 43.0 19V @30A 29V @ 20A 32V @ 18A 45V @ 13A 350 150 120 100 MAXIMUM LEAKAGE CURRENT @VWM ID µA 100 RATED STAND-OFF VOLTAGE @ V WM VOLTS 5.0 12.0 15.0 24.0

4 www.protekdevices.com05083.R2 9/03 PSMDA05C-4 thru PSMDA24C-4 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProT ek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProT ek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. P ACKAGE OUTLINE & DIMENSIONS ProTek Devices

2929 South Fair Lane, Tempe, AZ 85282

Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: sales@protekdevices.com Web Site: www.protekdevices.com TAPE & REEL/BULK ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., PSMDA05C-4-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PSMDA05C-4-T13. 4. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. Outline & Dimensions: Rev 1 - 11/01, 06009 A B C D F G J K P R 4.80 3.80 1.35 0.35 0.40

1.27 BSC

0.18 0.10 5.80 0.25 5.00 4.00 1.75 0.49 1.250 0.25 0.25 6.20 0.50 0.189 0.150 0.054 0.014 0.016

0.05 BSC

0.007 0.004 0.229 0.010 0.196 0.157 0.068 0.019 0.049 0.009 0.008 0.244 0.019 DIM MIN MAX MIN MAX MILLIMETERS INCHES P ACKAGE DIMENSIONS NOTES 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. -A- P-B- D G 8 5 -T - K C R X 45º J F 0º - 10º 0.010” (0.25 MM) MBM 4 PL 0.010” (0.25 MM) SBM 8 PL T A S P ACKAGE OUTLINE SO-8 0.030” ± 0.005” 0.050” ± 0.005” 0.160” ± 0.005” 0.045” ± 0.005” 0.245” MIN MOUNTING P AD